• Journal of Radiation Protection and Research
• /
• v.37 no.4
• /
• pp.167-172
• /
• 2012

Jeju Island is a significant area as a reference site of in situ gamma spectrometry because there are a number of open spaces which includes $^{137}Cs$ above a certain level. In this paper, the pasture within the Hallasan National Park was selected as one of the open spaces of Jeju Island. The homogeneity of $^{137}Cs$ at the site was assessed by analysis of variance on count and by radioactivity concentration obtained through in situ gamma spectrometry. For this purpose, the count of a total of 79 points at 3 sites were measured with less than count uncertainty of 5% for 2000 seconds. In the results of the analysis of variance, the 2 sites were homogeneous, and the remaining 1 site can be specified to be homogeneous through the adjustment of measuring range. The distribution of radioactivity concentration calculated by in situ gamma spectrometry were $53.7{\sim}93.2Bq\;kg^{-1}$, $30.5{\sim}61.0Bq\;kg^{-1}$ and $48.8{\sim}102Bq\;kg^{-1}$ at each site.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.135-146
• /
• 2015

To provide the data necessary to determine the design wind speed for calculating the wind load acting on a greenhouse, we measured the wind speed below 10m height and analyzed the power law exponents at Buan and Gunwi. A wind speed greater than $5m{\cdot}s^{-1}$ is appropriate for calculating the power law exponent necessary to determine the wind speed distribution function according to height. We observed that the wind speed increased according to a power law function with increased height at Buan, showing a similar trend to the RDC and JGHA standards. Therefore, this result should be applied when determining the power law function for calculating the design wind speed of the greenhouse structure. The ordinary trend is that if terrain roughness increases the value of power law exponent also increases, but in the case of Gunwi the value of power law exponent was 0.06, which shows contrary value than that of the ordinary trend. This contrary trend was due to the elevations difference of 2m between tower installed and surrounding area, which cause contraction in streamline. The power law exponent started to decrease at 7 am, stopped decreasing and started to increase at 3 pm, and stopped increasing and remained constant at 12 pm at Buan. These changes correspond to the general change trends of the power law exponent. The calculated value of the shape parameter for Buan was 1.51, confirming that the wind characteristics at Buan, a reclaimed area near the coast, were similar to those of coastal areas in Jeju.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.179-187
• /
• 2010

The use of high frequency band, broad band and MIMO antenna is expected in the next generation mobile communication system. By the rapid increase of demand for wireless communications and the explosive increase of the mobile communication services, researches for optimization of next-generation mobile communication system are required. In the existing MIMO channel models, propagation-environments are commonly classified into urban, suburban, rural area, etc. However such approaches can have drawbacks in that many different morphologies may exist even in the urban area, for example. In this paper, we introduced path morphology concept, and proposed the method of morphology classification considering the building height, density, etc. Delay spread(DS), angular spread(AS) of AoD and AoA analyzed for each environment using the ray tracing technique. Based on the analysis, a MIMO channel model appropriate in domestic environment was suggested.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.459-465
• /
• 1998

To obtain the basic data for the conservation and cultivation of native herb species under the forest, the relations between distribution of native herb species and site factors, distribution of native herb species, and site factors were surveyed on natural forest at subalpine zone in Mt. Odae. Ainsliaea acerifolia, Pseudostellaria palibiniana and Pimpinedla brachycarpa were distributed mainly on broadleaved mixed forest, Clematis fusca var. coreana, Carex siderosticta. Isodon excisus and Vicia unijuga did mainly on gab sites. The distribution of Ligularia fisheri, Aconitum pseudo-laeve var. erectum, Cacalia hastata and Artemisia stolonifera were significantly differed between slope directions. Artemisia stolonifera was distributed more frequently in south directed slope, and Ligularia fisheri, Aconitum pseudo-laeve var. erectum and Cacalia hastata were distributed more frequently in north and west directed slope than the other. The distribution of Aconitum pseudo-laeve var. erectum and Artemisia stolonifera were significantly differed between soil moisture conditions. Artemisia stolonifera was distributed mainly on the dry site, but Aconitum pseudo-laeve var. erectum did mainly on the dry site. Negative correlations between density of Clematis fusca var. coreana, Carex siderosticta. Isodon excises and Vicia unijuga and crown coverage was proved. Aconitum pseudo-laeve var. erectum, Pimpinella brachycarpa, Meehania urticifolia, Smilacina japonica and Pseudostellaria palibiniana were mainly distributed on wet and shady sites under forest canopy, but Pedicularis resupinata, Clematis fusca var. coreana and Artemisia stolonifera did on sunny sites at forest edge or gab.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.29-38
• /
• 2016

As publicizing of electromagnetic devices such as smart_phone and drone etc. which are relate with geomagnetic direction, and recognition about the importance to space weather effect and their hazards rises up recently, it is required heavily that the study on the effective measurement of geomagnetic declination and geomagnetic field effects of space weather. The purpose of this study is that the investigation of the feasibility of the absolute geomagnetic measurement in a place, where man-made geomagnetic contamination is low or negligible, with replacing the azimuth marks used for the absolute geomagnetic declination measurement with unified control points(UCP) which established at suburb. Further to this, have first derived the correlation of daily variations and disturbance level between the published indices($K_P$ and $K_K$) and geomagnetic element calculated from geomagnetic data of Cheongyang observatory located at the middle stage in Korea and is a member of INTERMAGNET. In addition, have carried out that the absolute measurement for the geomagnetic declination at three places near unified control point and one place with wide open field in Korea. The world magnetic models(WMMs) are selected as the criteria for comparison on the feasibility of geomagnetic declination investigation near unified control points. We compared deviations of declination from absolute measurement with that obtained from WMMs, also those from WMMs inter-comparison. The result through examination and analysis show that the feasibility of the absolute geomagnetic declination measurement with replacing the azimuth marks with UCP which established at suburb is possible.

• Archives of design research
• /
• v.16 no.4
• /
• pp.185-196
• /
• 2003

The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R＆D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

• Journal of Radiation Protection and Research
• /
• v.10 no.2
• /
• pp.96-108
• /
• 1985

A study for the assessment of natural environmental radiation exposure at a flat and open field of about $10,000m^2$ in area in CNU Daeduk campus has been carried out by means of gamma-ray scintillation spectrometry and thermoluminescence dosimetry for one year period of time from October 1984. The detectors used were 3'${\phi}{\times}$3' NaI(T1) and two different types of LiF TLD, namely, chip sealed in plastic sheet which tightly pressed on two open holes of a metal plate and Teflon disk. Three 24-hour cycles of in-situ spectrometry, and two 3-month and one 1-month cycles of field TL dosimetry were performed. All the spectra measured were converted into exposure rate by means of G(E) opertaion, and therefrom exposure rate due to terrestrial component of environmental radiation was figured out. Exposure rate determined by the spectrometry was, on average, $(10.54{\pm}2.96){\mu}R/hr$, and the rates of $(12.0{\pm}3.4){\mu}R/hr$ and $(11.0{\pm}3.6){\mu}R/hr$ were obtained from chip and disk TLD, respectively. Fluctuations in diurnal variation of the exposure rate measured by the spectrometry were noticeable sometime even in a single cycle of 24 hours. It is concluded that appropriately combined use of TLD with iu-sitn gamma-ray spectrometry system can give more accurate and precise measure of environmental radiation exposure, and further study for more adequate and sensitive TLD for environmental dosimetry, including improvement and elevation of accuracy in data assessment through inter-laboratory or international intercomparison is necessary.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.133-139
• /
• 2012

The Aims of this study are to investigate ecological environments and indoor-rearing conditions of Eurema hecabe for artificial rearing. Two different nesting site, a open area nearby small river(A area; Daejin-ri, Gonyang-myeon, Sachun-si, Gyoungsangnam-do) and a foot of a hill area(B area; Noryang-ri, Seolcheon-myeon, Namhae-gun, Kyoungsangnam-do), selected for investigation of ecological habitat environment, and investigated two times per month, during six month, from June to November in 2010. In result, the number of butterflies, Eurema hecabe, at the hill area(B area) was 6 times more than the open area(A area). We observed the number of eggs, larvae and puapae in the B area more times compared to those in the A area. In the B area, Lespedeza cuneata was higher preference than the other host plant, Lespedeza pilosa and Albizia julibrissin. For development of indoor-rearing conditions, common grass yellow butterfly, Eurema hecabe, was reared in a room condition. As a result of oviposition preference experiment, 100-mated-female laid significantly higher number of eggs $104.9{\pm}19.6$ on Lespedeza cuneata plant, whereas the number of eggs was $12.7{\pm}4.5$ on Cassia obtusifolia plant. Moreover, the eggs hatched within $5.1{\pm}0.9$ days from the day of oviposition and procent of egg hatchability was 53.7% on host plant. The headwidth of each developmental larval stage were $0.36{\pm}0.02$(1st), $0.61{\pm}0.02$(2nd), $0.93{\pm}0.05$(3rd), $1.46{\pm}0.08$(4th), $2.25{\pm}0.11$(5th). The larval period was $12.1{\pm}0.9$ days under high temperature, long day condition($25^{\circ}C$, 16L : 8D), showing 81.0% pupal ratio. The pupal period was $6.9{\pm}0.7$ days, and the emergence rate was 79.6%. Based on above experiment, artificial rearing system of common grass yellow butterfly, Eurema hecabe was completed in indoor condition.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.1
• /
• pp.28-43
• /
• 2022

This study classified UAV image-based physical spatial types for parks in urban areas of Changwon City and analyzed thermal comfort characteristics according to physical spatial types by comparing them with ENVI-met thermal comfort results. Physical spatial types were classified into four types according to UAV-based NDVI and SVF characteristics. As a result of ENVI-met thermal comfort, the T_MRT difference between the tree-dense area and other areas was up to 30℃ or more, and it was 19. 6℃ at 16:00, which was the largest during the afternoon. As a result of analyzing UAV-based physical spatial types and thermal comfort characteristics by time period, it was confirmed that the physical spatial types with high NDVI and high SVF showed a similar to thermal comfort change patterns by time when using UAV, and the physical spatial types with dense trees and artificial structures showed a low correlation to thermal comfort change patterns by time when using UAV. In conclusion, the possibility of identifying the distribution of thermal comfort based on UAV images was confirmed for the spatial type consisting of open and vegetation, and the area adjacent to the trees was found to be more thermally pleasant than the open area. Therefore, in the urban planning stage, it is necessary to create an open space in consideration of natural covering materials such as grass and trees, and when using artificial covering materials, it is judged that spatial planning should be done considering the proximity to trees and buildings. In the future, it is judged that it will be possible to quickly and accurately identify urban climate phenomena and establish urban planning considering thermal comfort through ground LIDAR and In-situ measurement-based UAV image correction.