• Title/Summary/Keyword: 개폐각도

Search Result 18, Processing Time 0.023 seconds

A Study on analysis between pressure-drop and cavitation diminution with ball valve (볼 밸브 압력강하와 공동현상감소에 대한 연구)

  • Gu, Bon-Chan;Gi, Jun-U;Lee, Do-Hyeong
    • Proceeding of EDISON Challenge
    • /
    • 2013.04a
    • /
    • pp.393-397
    • /
    • 2013
  • 관내의 유량을 제어하는 볼 밸브(ball valve)는 개폐각도(opening degree)가 커짐에 따라 출구에서 유속이 증가하고 밸브(valve)의 입 출구 간 압력강하(pressure drop)가 증가한다. 출구에서의 압력이 작동유체의 포화증기압보다 낮아질 때 공동현상(cavitation)이 발생한다. 관내에서의 공동현상은 배관시스템의 진동 및 소음, 부식 등에 있어서 악영향을 미칠 수 있으므로 설계에 매우 중요한 요소이다. 버터플라이 밸브를 비롯한 다른 밸브에서는 공동현상감소에 대한 연구가 많이 이루어졌다. 이에 본 연구에서는 볼 밸브 내 유동 특성(characteristic of flow)과 볼 밸브의 입출구간 압력강하를 줄이는 연구를 수행하였다. 개폐 각도와 그에 따른 압력강하와의 관계를 Edison_전산열유체를 사용하여 분석하고 공동현상을 감소시킨 볼 밸브의 설계를 제시 하였다.

  • PDF

Switching Flashover Characteristic Tests and Analysis for Jumper V String in 765kV T/L Live Line Works (765kV 점퍼V련에서 활선작업 유형별 개폐섬락 특성실험 및 분석)

  • Kim, D.S.;Kim, H.J.;Lee, H.K.;Han, S.O.;Kim, J.H.;Koo, K.W.
    • Proceedings of the KIEE Conference
    • /
    • 2007.04b
    • /
    • pp.20-23
    • /
    • 2007
  • 활선작업시 개폐섬락전압은 철탑형태와 작업유형에 따라 개폐섬락전압이 달리 나타나게 된다. 즉, 활선작업자의 위치, 철탑 종류 및 애자장치 종류 등에 따라 개폐섬락전압은 다르게 나타나기 때문에, 적용하고자 하는 활선공법이 있다면, 이에 대한 개폐섬락전압의 특성을 파악해 둘 필요가 있다. 점퍼V련은 일반적으로 선로의 수평각이 중각도 지역에 설치된다. 즉, 수평각이 너무 커서 조립식 점퍼장치를 설치할 수 없는 철탑에 점퍼V련 장치를 설치한다. 765kV 송전선로에서 실제 점퍼V련 장치가 많이 설치되어 있지 않으나, 이 경우에도 유지보수 사항이 발생할 수 있기 때문에 안전한 활선작업을 위한 실규모급 개폐섬락특성에 대해 검토할 필요가 있다.

  • PDF

부착방지 기능성 도료의 탈착 특성 평가 및 고찰

  • Lee, Hak-Yeong;Kim, Yu-Seop;Jeong, Yong-Chan;Lee, Su-Yeol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.41-41
    • /
    • 2018
  • 안정적이고 효율적인 전력 공급을 위해 번화가 대로변 주변에 다수의 지상 변압기 및 개폐기가 설치되고 있으며, 이로 인해 불법 부착물로 인한 도시의 미관 훼손, 변압기 및 개폐기의 오염 등의 문제가 발생하고 있다. 따라서 각 산업체 및 연구 기관에서는 부착 방지용 코팅 도료 및 시트에 대해 다양한 연구개발을 진행하고 있으며, 현장에 적용되고 있는 사례도 있다. 하지만 현재 현장에 적용된 대부분의 제품들은 약 1년 정도의 시간이 지나면 고유의 기능을 상실하며, 도료 및 시트와 기판 사이의 박리가 일어나 우수한 성능을 보이지 않아, 결과적으로 도시에 더욱더 악영향을 주고 있다. 이러한 원인으로는 도료 및 시트의 성능 평가를 위한 다양한 규격들이 존재하지만, 테이프류 탈착 시 영향을 주는 인자(Factor)들이 명확하게 설정되어 있지 않고, 이에 대해 면밀하게 분석한 자료가 없으며, 정량적이고 객관적인 시험 방법이 고려되지 않고 있기 때문에 좋은 제품을 선별하기 어려운 상황이다. 따라서 여러 가지 제품들의 비교평가 및 기술 개발에 활용할 수 있는 가이드라인을 제시하기 위해 일반적으로 사용되고 있는 면테이프(Duct tape)를 이용하여 기판(Substrate)에 대해 다양한 인자를 기준으로 탈착 특성을 측정 및 평가하였다. 현재 지상 배전함 및 개폐기는 분체도장(Powder coating)으로 구성되어져 있으며, 그 모재는 탄소강(Carbon steel)으로 이루어져 있고, 소수의 경우 스테인리스(Stainless steel)를 사용하기 있기 때문에 분체도장(Powder coating), 탄소강(Carbon steel), 스테인리스(Stainless steel)를 기판으로 선정하여 탈착 특성을 평가했다. 탈착 특성에 관여하는 요인으로는 탈착 각도(Peeling angle), 탈착 속도(Peeling speed), 표면 조도(Surface roughness) 등이 있고, 상대 습도(Relative humidity)의 경우 탈착 특성에 영향을 거의 주지 않는 것을 확인했다. 탈착 시 각도가 클수록, 속도가 빠를수록, 조도가 작을수록 부착력(Peel resistance, N/cm)과 탈착 에너지(Energy, J)가 커지며, 탈착 특성에 영향을 주는 인자를 바탕으로 95% 신뢰도 구간을 적용한 탈착특성 모델링을 제시하였다. 이 모델링을 이용하여 실제 현장에서 발생할 수 있는 다양한 각도($90^{\circ}$, $180^{\circ}$)와 속도 범위(100 ~ 1500mm/min)에서의 탈착 특성을 추정하는 것으로, 좋은 성능 및 내구성을 가진 제품을 효과적으로 선별한다.

  • PDF

Study on the improvement in Cv of a Main Oxidizer shut-off Valve (CC 산화제 개폐밸브 유량계수 향상에 관한 연구)

  • Hong, Moon-Geun
    • Aerospace Engineering and Technology
    • /
    • v.8 no.2
    • /
    • pp.140-148
    • /
    • 2009
  • MOV(Main Oxidizer shut-off Valves) control the combustion of launch vehicle systems by the supply and the isolation of liquid oxygen to a main combustion chamber in launch vehicle systems. Moreover, in the steady operational state, the MOV should secure a constant flow rate of liquid oxygen for combustion instability in the combustion chamber. Concerning the development of MOV, TM(Technology Model) has been manufactured and normal operations of the valve have been verified. However, the Cv of TM has been proved to be too low as compared with a design specification value. Therefore, CFD analysis have been performed by modification of the configurations of TM in order to increase sufficiently Cv of EM(Engineering Model), which is the following model of TM. The modifications of TM configurations such as partial scale-up of valve, increase of stroke length, and outlet angle of 120o would result in a considerable augmentation of Cv. It has been verified by flow capacity tests that the improved Cv of EM is min. 212, which is higher than Cv of TM, 161 by about 32%.

  • PDF

A Study on the Characteristics of Flow in the Metal Touch Ball Valve according to the Opening degree (볼밸브의 개폐각도에 따른 유동특성 분석)

  • An, Tae-Won;Han, Geun-Jo;Han, Dong-Seop;Lee, Seong-Wook
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.175-178
    • /
    • 2007
  • Valves has been used widely in various industries. There are many purposes for valve usage in a piping system. One of them is to control the flow rate. For a design of ball valves, it is important to know the characteristics of flows inside a ball valve. In this study, the computation fluid dynamics were conducted to observe flow velocity, flow coefficient and pressure distribution using CFX 10 according to the valve angles and uniform incoming velocity.

  • PDF

Flow Visualization of Arteriovenous Grafting Using PIV Technique (PIV 기법을 이용한 동정맥루 문합에 대한 유동가시화)

  • Jeon, Min-Gyu;Kim, Hyoung-Ho;Suh, Sang-Ho;Choi, Young Ho;Lee, Hyun-Jin;Doh, Deog-Hee
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.37 no.11
    • /
    • pp.985-990
    • /
    • 2013
  • An arteriovenous fistula is artificially produced using a graft for hemodialysis in patients. In an arteriovenous graft (AVG), the angle of its arterial or venous anastomosis play an important role in producing flows inside blood vessels, through which a stenosis may occur. Most studies thus far have focused on CFD results. In this study, a PIV technique is used to analyze the hemodynamic characteristics at the arterial or venous anastomosis of an AVG having an angle of $30^{\circ}C$. For flow dynamic similarity, the Reynolds number is set to be the same for real and simulated flows. A PIV experiment is performed with a control valve in the arterial part. In conclusion, the recirculation flow appeared in the bifurcation area and the total blood velocity changed according to the extent of valve opening.

CFD Analysis on the Flow Characteristics with Flow Coefficient in a PFA Lined Ball Valve for Different Opening Degrees (개폐각도에 따른 PFA 라이닝 볼밸브의 유동특성 및 유랑계수 전산해석)

  • Jeon, Hong-Pil;Kim, Dong-Yoel;Lee, Jong-Chul
    • The KSFM Journal of Fluid Machinery
    • /
    • v.17 no.4
    • /
    • pp.76-80
    • /
    • 2014
  • PFA fluoropolymer lined technology revolutionized ball valve development and design decades ago and continues to be pivotal for many products and valve solutions in diverse industries and applications, such as chemical process, semiconductor/LCD manufacturing processes, pharmaceutical and others. Because of the extreme operating conditions such as high-temperature (${\sim}120^{\circ}C$) and high-pressure (~10 bar), the reliability of the valve is very important for minimizing in-line leakage and fugitive emissions of strong corrosive chemicals (hydrochloric acid, hydrofluoric acid, nitric acid, etc.) transported through the lines. In this study, we investigated the flow characteristics with flow coefficient in a PFA lined ball valve for different opening degrees using CFD analyses. The results should be the guidance for a new PFA lined ball valve design that will incorporate all the acclaimed and demonstrated benefits of the current design approaches.

Structural Analysis of Door Safety Device (도어 안전장치의 구조해석)

  • Lee, Jong-sun
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.9
    • /
    • pp.173-177
    • /
    • 2019
  • This study is door safety device for the structural analysis are described. Recently emerged as a key point of the door safety and increase the need of a door safety device. In order to improvement this inconvenience, the door safety device was design and structural analysis by using CATIA. CATIA utilizes door safety device element model for displacement, stress and strain energy were obtained. Consideration of door open angles were $95^{\circ}$, $100^{\circ}$, $105^{\circ}$, $110^{\circ}$, $115^{\circ}$, $120^{\circ}$. These results will be provided to develop new concepts of door safety device as initial data.

A Study on Flow Analysis at Ball Valve according to Opening and Shutting Angle (개폐 각도에 따른 볼 밸브에서의 유동 해석에 관한 연구)

  • Cho, Jae-Ung;Han, Moon-Sik
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.10 no.2
    • /
    • pp.46-51
    • /
    • 2011
  • This study result is obtained by flow analysis according to opening and shutting angle of ball valve. As opening and shutting angle becomes larger, vortex flow becomes smaller and flow rate becomes increased. And the pressure drop is shown to be smaller at the inlet and outlet of ball. As this angle becomes larger, mass flow rate becomes increased. Its rate becomes increased abruptly in case of opening and shutting angle at more than $60^{\circ}$.This analysis result can be applied usefully with no leak at pipe system field by the optimum control of mass flow rate according to opening and shutting of ball valve.

Flow Characteristics in the Downstream Region of a Butterfly Valve with Various Disk Opening Angle (디스크 회전각에 따른 버터플라이 밸브 하류에서의 유동특성)

  • Cho, Dae-Hwan
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.12 no.4 s.27
    • /
    • pp.267-272
    • /
    • 2006
  • Butterfly valves have been used for shut-off and throttling-control application in many industrial fields. Recently, they are frequently used for cooling water, oil system and ballast piping system of many larger vessels. They are especially suited for flow throttling control of heat exchangers in engine room. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics of butterfly valve inserted within circular pipe. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal systematic performance of the butterfly valve, wall pressure was measured at 6 points along the pipe by digital manometer. As the valve position moves to the closed side, flow separation increases and persists its tendency downstream until smoothly uniform flow developed. The pressure loss is found to be about zero for the disk open angles less than 45 degrees, but is substantially increased for those larger than 60 degrees.

  • PDF