• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.399-406
• /
• 2006

The natural frequencies of Al square plates with a brass inclusion were analyzed by the rule of mixtures. The rule of mixtures is the method to derive natural frequency mutiplying effective inplane wane speed and nondimensional frequency parameters. Numerical models were Al square plates with an inclusion with cantilever type, 2 clamped edge-2 free edge type, 3 clamped edge-1 free edge type and fully clamped edge type. In cantilever type plates, 2 clamped edge-2 free edge type plates and 3 clamped edge-1 free edge plates with an inclusion, good agreement within 10% obtained from rule of mixtures' results and numerical analysis results within inclusion area ratio 1/9. It was found that the natural frequencies of the cantilever type, 2 clamped edge-2 free edge type and 3 clamped edge-1 free edge type plates with an inclusion decrease as the size of inclusion increases when inclusion is located center of plates. And when the density of inclusion is less than the plates, natural frequency of plates with an inclusion increases as the size of inclusion increases.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.126-145
• /
• 2017

The Seokgaejae section is located along a timber access road and a driveway across Bonghwa County, North Gyeongsang Province, and Samcheog city, Gangwon Province. Its stratigraphic column shows all of the ten strata of the lower Paleozoic Taebaek Group, Joseon Supergroup. The Seokgaejae section is proved to be scientifically important. Thirty-eight domestic/international journal papers have been published on this early Paleozoic stratigraphic site, and many distinguished researchers over the world have visited the site. However, the section has never been considered to be designated as a national natural monument and was not included in the adjacent Gangwon Paleozoic National Geopark due to management or administrative issues. Although the Seokgaejae section sufficiently satisfies many of the national natural monument criteria, designation for the natural monument may not be justified because of the facts that the outcrop was artificially exposed by road construction; the chance of destruction of the outcrop is relatively few; demage on the outcrop to some extent does not impair the intrinsic value of the section; and the geomorphological/landscape value of the section is low. The application of the recently modified geological heritage assessment model to the Seokgaejae section shows very high scores on the scientific/educational, intrinsic, and functional values. Based on the improved geological heritage grade standard, the Seokgaejae section conforms to the national-level protection criteria. It is strongly recommended to manage the Seokgaejae section as a principal geosite by including it in the Gangwon Paleozoic National Geopark. This case study on the Seokgaejae section also suggests that the process of application and endorsement of a national geopark need further improvement. As well as the improvement of the system or policy related to geological heritages, further efforts of the experts in various fields of geoscience are required in order for other geological heritages not to be neglected from now on.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.221-230
• /
• 2000

The usefulness and limitations of the impact-resonance method, which is a nondestructive evaluation (NDE) method for concrete, are studied by both experimental and theoretical methods. For the experimental study, several concrete slab specimens with various inclusions embedded were fabricated, and tested by the impact-resonance method. Some of the inclusions have been detected and accurately located, but some have not. The reasons for the failure in the latter cases have been investigated theoretically by using finite element analyses, from which the primary factors determining the success of the method have also been identified. This study will serve to enhance the understanding of the underlying physics and to improve the usefulness of the impact-resonance method as applied to concrete NDE.

• Journal of Life Science
• /
• v.9 no.6
• /
• pp.709-714
• /
• 1999

Ultrastructure of ocellar system was studied in adult Drosophila melanogaster. Ocellus was composed of terminal receptors, interneuron and glia. These three part showed different brightness each other and each component was distinct. In the glial cell, rER was abundant, and terminal receptors and interneuron showed numerous microtubules, special transporting system. The terminal receptors have particular structure referred as capital projection connecting the terminal receptor to glia. In synaptic active zone between terminal receptor and interneuron, ribbon-like structures and synaptic vesicles around the structures were frequently observed. In addition, the cross section of giant interneuron was also observed.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.17.2-17
• /
• 1987

식도이물은 이비인후과 영역에서 흔히 경험할 수 있는 것으로 연령, 성별, 민족 등에 제한없이 발생할 수 있으며, 대부분의 경우 예기치 않게 돌발적이며 부주의로 인하여 발생되는 경우가 많다. 이물은 일상생활과 밀접한 관계가 있는 것으로서 그 종류가 매우 다양하다. 대부분의 식도이물의 경우, 진단 및 치료가 용이하나, 경우에 따라서는 이물의 종류, 개재부위, 체류기간, 선행질병 및 증상 등에 따라 진단 및 치료가 용이하지 않은 경우도 있다. 특히 다발성 식도협착이 있는 환자의 원위(distal) 협착부위에 개재한 식도이물은 식도경이 근위(proximal)협착부를 통과할 수 없으므로 이물제거가 상당히 힘들 경우가 많다. 저자들은 최근 부식성 식도염에 속발한 다발성 식도협착이 있는 2명의 환자에서 원위협착부위에 개재한 식도이물을 fluoroscopy 도움하에서 Medi-Tech biliary basket을 사용하여 제거하였기에 문헌적 고찰과 함께 보고하는 바이다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.302-309
• /
• 2000

An MFL (Magnetic Flux Leakage) testing system has been developed in order to inspect the non-metallic inclusions in the thin steel sheets. We have made a differential type flux-gate magnetometer using the measurement of apparent coercive field strength of soft magnetic core. The specifications of the electromagnet was determined using FEM software, and MFL testing system with 3 axis degree of freedom was constructed. The feasibility testing for non-metallic inclusion was shown using the system. By digitizing MFL signal and using 2-D graphic display, we could identify various surface defects other than the inclusions.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.32-36
• /
• 2012

Purpose: The purpose of this study was to evaluate the radiologic and clinical outcomes after intercalary tricortical iliac bone graft with plate fixation for the nonunion of midshaft clavicular fractures. Material and Methods: Between September 2007 and May 2011, 10 patients who were treated by the intercalary tricortical iliac bone graft, with plate fixation for clavicle nonunion, were studied. The mean follow-up period was 30.7 (12~57) months. After the sclerotic bone was excised to the bleeding cortical bone, we interposed the tricortical iliac bone to provide structural support and restore clavicle length, and then fixed the plate and screws. The radiologic outcomes on the serial plain radiographs and clinical outcomes, according to UCLA, ASES and Quick DASH scores, were analyzed. Results: Bony union was obtained in all cases (100%) and the average union time was 18.4 (14~24) weeks. The average respective UCLA and ASES scores improved from 16.7 and 52.1 preoperatively to 27.4 and 83.6 postoperatively (p<0.05). The average Quick DASH score was 40.5, at the final follow-up. Complications were 2 shoulder stiffness, and one case had removal of device and arthroscopic surgery at 11 months, postoperatively. There were no implant failure or infection. Conclusion: Intercalary tricortical iliac bone graft, with plate fixation for the nonunion of midshaft clavicular fractures, is a good option that can provide structural support and restore clavicle length, as well as high union rate.

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.113-126
• /
• 1987

본 논문은 통행 기·종점 및 교통수단선택의 문제를 교통망 평형모형과 종합하여 이를 하나의 최적화 문제로 구성하는 방법 및 그의 실제응용 방법을 제시, 검토하였다. 두 가지의 행태적 특성, 즉 교통비용을 최소화하려는 사용자 평형과 통행 기·종점 및 교통수 단 등의 선택에 있어 어느 수준의 상호교류를 유지하려고 하는 엔트로피 극대화 현상이 병 애되어 최적화 문제를 형성하게 된다. 본 연구의 목적은 이의 체계적 구성과 아울러 이를 여러 도시에서 설치, 사용되고 있는 개재의 UTPS프로그램과 종합시킴으로써 개재의 대한 데이터베이스를 사용케하고 실제응용을 단순화 시키는데 있다. 개발된 모형과 방법은 시카 고 지역의 자료를 이용하여 그 타당성이 검토되었다.

• 발명특허
• /
• v.7 no.12 s.82
• /
• pp.36-37
• /
• 1982

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1221-1232
• /
• 1996

용접부 인성을 향상시키기 위해 Ti 산화물을 첨가한 Ti 산화물강에 대하여 용접시 최고가 열온도와 냉각속도의 변화가 용접열영향부의 미세조직에 미치는 영향을 조사하였다. 용접열영향부의 인성향상에 기여하는 acicular ferrite는 140$0^{\circ}C$ 이상의 최고가열온도와 $\Delta$t800-500가 40초보다 빠른 냉각속도에서 활발해 생성되었다. 오스테나이트 결정립내에서 개재물로부터 핵생성된 일차 acicular ferite의 생성량은 전체 aicular ferrite의 약 20% 정도로 적었으며 대부분의 acicular ferrite는 일차 acicular ferrite로부터 생성된 이차 acicular ferrite인 것으로 나타났다. 이차 acicular ferrite는 plate사이에 Fe3C층이 존재하는 것으로 보아 확산기구에 의해 생성되는 것으로 생각된다. 개재물은 TiO, TiO2, TiN, MnS, AI2O3 MnO(galaxite)등으로 구성된 복합상이었으며 개재물이 일차 acicular ferrite의 핵생성 site로 작용하기 위해서는 약 1$\mu\textrm{m}$이상의 크기가 효과적인 것으로 나타났다. Ti 산화물과 TiN는 직접적인 acicular ferrite의 핵생성 site로 작용하기보다는 MnS, galaxite 등의 석출 site로 작용하여 개재물의 크기를 증가시킴으로써 acicular ferrite의 생성을 촉진시키는 것으로 생각된다.