• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.174-188
• /
• 2024

This review summarized research trends regarding sample collection methods, pretreatment method, and types of analysis devices for microplastics (MPs) in soil and groundwater matrices. Soil sampling considers the selection of sampling location, depth, and volume. The typically sampling depth is within 15 cm (topsoil), and about 1 kg of mixed each sample. Among spot sampling and continuous flow sampling, groundwater sampling mainly used a continuous flow sampling, with collection rates 2 to 6 L/min in the range of 300~1,000 L, and followed by immediate on-situ filtration. Pretreatment method, applied to soil and groundwater, consist of organic digestion and density separation. In the organic digestion method, H₂O₂ is recommended among H₂O₂, acidic, alkaline, and enzymatic method. NaCl is primarily used as a reagent in density separation. However, depending on the density of MPs, other regents can be selectively used like ZnCl₂, ZnBr₂, and etc. Representative analysis device includes Fourier Transform Infrared (FTIR) and Raman spectroscopy for non-destructive analysis and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) for destructive analysis. µ-FTIR and Raman can count MPs of larger than 10 and 1 ㎛, and analyze MPs materials. However, it is need to sufficiently remove interference, like organic matter, in spectroscopic analysis using essential pretreatment method. Py-GC/MS is being continuously researched because it doesn't require complex pretreatment method and allows quantitative analysis of specific materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.117-124
• /
• 1991

Based on the momentum equation for the flow in a stream bend, the force per unit area which the flow exerts on the outer of a bend is directly proportional to a certain curvature coefficient, $C{\alpha}$. This coefficient is dependent on the ratio of bend radius(R) to flow width(W), as well as on the coefficient of dynamic bedload friction, $tan{\alpha}$. According to the results of the data analysis for the downstrream at the Han river, the range of R/w values is between 2.0 and 4.0. Exploring the variations of $C{\alpha}$ with R/w values a functional relationship which, for the known values of $tan{\alpha}$, shows maximum values of $C{\alpha}$ for R/w values between 2.21 and 4.42 in 1963, while in 1981 its values lied between 1.93 and 3.54.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1985-1990
• /
• 2008

1970년대 이후의 고도경제성장기에 치수대책과 동시에 건설골재로서 하상이 굴착된 하천이 많으며, 국가하천 지정구간외에서는 평균하상고가 1.0m 이상 저하한 하천구간도 많다. 또한 국가하천은 상류의 사방공사나 댐건설에 의한 영향이 복합적으로 하도에 나타나고 있어 하상굴착이 하도특성에 어떤 영향을 미치는가를 실증적(實證的)으로 검증하는 것은 어려운 과제이다. 하천에서의 골재채취는 제방부의 침식에 의한 호안파괴, 하상저하에 따른 교량이나 취수보 등 구조물의 기초 노출이 치수적인 문제를 야기할 뿐만 아니라, 단시간내에 하도의 지형구조를 급격하게 변화시켜 여울 소의 하상구조 교란이나 수중 및 하천변의 서식처 파괴 등으로 하천의 물리적 환경에 큰 영향을 미침으로써 생태계를 교란하거나 파괴하는 결과를 초래하게 된다. 본 연구에서는 골재채취로 인하여 교란된 하천의 복원 및 적응관리 계획수립의 전단계에 필요한 교란평가기법을 개발하기 위하여 황강, 남강 및 감천을 대상으로 하여 대조구간과 교란구간을 선정하고 조사 분석하였다. 하천골재 채취가 없거나 경미한 대조구간에서는 홍수량이 변하지 않으면 terrace 모양의 하안부 재료가 하상재료와 거의 같기 때문에 홍수가 있으면 침식된 원래의 하폭으로 회복되는 방향으로 변하지는 않는 경향이 나타났다. 반면에 골재채취가 많은 경우 큰 홍수시의 저수로부의 수심을 증가시키기 때문에 수충부 등의 최심하상고가 크게 되는 경향이 있었으며, 고수부는 침수되는 빈도와 수심이 감소하기 때문에 토사의 퇴적속도(고수부의 상승속도)의 감소, 퇴적물의 세립화 경향이 나타나서 모래, 실트가 퇴적하지 않는 고수부상에 모래, 실트가 퇴적되는 경우가 있고, 반대로 고수부의 퇴적속도가 상승하는 경우도 있었다. 골재채취로 횡단방향의 평탄화가 초래되어 여울 소의 하상구조가 교란됨과 동시에 구간별로 종단경사가 완만해지며, 대부분 교량부에 하상유지공을 설치해야 할 정도로 하상경사가 급변하는 구간이 다수 조사되었다. 또한 선행연구에서 개발된 하상서식환경, 하상재료, 유속/수심상황, 유사퇴적, 하도흐름상태, 하도개수, 여울출현 빈도, 하안 안정성, 식생피복 및 하반림 등 10개의 교란평가항목을 적용하여 대조구간과 비교 평가하였다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.297-301
• /
• 2004

Nano-sized mullite (3Al$_2$O$_3$$.$2SiO$_2$) colloids were prepared by use of the spray combustion method. For combustion reaction, Al(NO$_3$)$_3$$.$9$H_2O$, and CH$_{6}$N$_4$O were used as an oxidizer and a fuel respectively, and then colloidal silica was also added as 2SiO$_2$source for mullite. The temperature of the reaction chamber was kept at 80$0^{\circ}C$ to initiate the ignition of droplets of the mixed precursors. For preventing droplet coagulation, the droplet number concentration was reduced using the metal screen filter, and the residence time of aerosol was kept at 2.5 seconds for laminar flow. The synthesized colloidal particles had an uniform spherical shape with 130 nanometer size and the crystalline phase showed the mullite with stoichiometry in the observations of XRD and TEM.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2015

This paper offers some long term perspective on what has been happening to some baseball statistics for Korean professional baseball. The data used are league summaries by year over the period 1982-2013. For the baseball statistics, statistically significant positive correlations (p < 0.01) were found for doubles (2B), runs batted in (RBI), bases on balls (BB), strike outs (SO), grounded into double play (GIDP), hit by pitch (HBP), on base percentage (OBP), OPS, earned run average (ERA), wild pitches (WP) and walks plus hits divided by innings pitched (WHIP) increased with year. There was a statistically significant decreasing trend in the correlations for triples (3B), caught stealing (CS), errors (E), completed games (CG), shutouts (SHO) and balks (BK) with year (trend p < 0.01). The ARIMA model of Box-Jenkins is applied to find a model to forecast future baseball measures. Univariate time series results suggest that simple lag-1 models fit some baseball measures quite well. In conclusion, the single most important change in Korean professional baseball is the overall incidence of completed games (CG) downward. Also the decrease of strike outs (SO) is very remarkable.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.195-200
• /
• 2020

In this study, the flow analyses by type of shock absorber orifice were carried out. A shock absorber is indispensable for the ride comfort that is important at the standard of a good car. As the analysis procedure, the actual speed of the shock absorber was set as the flow rate when the cylinder was advanced. And the flow analysis results on models A, B and C of shock absorber models were compared with each other. As the examination on the flow orifice in the vicinity of each model through the analysis of flow, the performance of shock absorber were recognized. On the whole, model A had the fastest flow rate and also had the largest flow rate. Model B had the slowest flow rate and the flow rate features of models B and C with the same number of orifices were similar. Through this study, it is possible to see which shock absorber orifice model facilitates the flow inside the cylinder and increases the ride comfort. It is seen that this analysis result on the flow analyses by type of shock absorber orifice can be applied by converging with the field of design.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.66-71
• /
• 2016

Nowadays, a number of sensors which are placed in industrial complex are monitoring areas involving chemical leak and other faults. However, even in the presence of the sensors, chemical leaks, sometimes involving huge amount of chemicals, continuously led to big losses in the industrial complex. In most industries, sensor installation has been performed using past experience or using senor manufacturers' guideline; which leads to poor performance of the installed sensor grid. Therefore, we investigate an optimal placement methodology of point sensors for rapid detention and response when chemical leaks happen. This research suggests a generalized formulation suitable for the optimized decision making of minimizing number of sensors to be placed and increasing the fraction of covered scenarios under assumption of negligible effect of other structures. The proposed method has been verified for suitable performance for simple leak scenario simulations, by achieving the safety objectives and guaranteeing safe process operations.

• Journal of Korea Water Resources Association
• /
• v.34 no.3
• /
• pp.231-240
• /
• 2001

The problem of the flocculation basin was induced by installing the pilot plant using tracer test at Yang-Duck water treatment plant in Pohang cite. The flocculation basin model downscaled as 1/20 was made of acryl and evaluated hydraulically by transforming the section of the effluent in the flocculation basin. The optimum section of the effluent was suggested and applied to the plant. The efficiency of the flocculation basin according to improvement was evaluated by the particle counter which can count the number of particles each size fraction. The results of this study are as follows : First, it was desirable to make the retention time as short as possible because the flow and the index value were similar regardless of the retention time. Second, after the modification in Yang-Duck water treatment plant, the problem of destruction of floe was improved and the plant was operated satisfactorily. The hydraulic experiment with tracer test can be applied to the performance evaluation as well as improvement of facility in unit process of existing water treatment plant. Additionally, it can be used to find a design factor in the new water treatment plant.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.76-80
• /
• 2004

Nano-sized ZnO colloids were prepared by use of spray combustion method. for combustion reaction, $Zn(NO_3)_2{\cdot}6H_2O$ and $CH_6N_4O$ were employed as an oxidizer and a fuel. Exothermic peak was shown at $230^{\circ}C$ by DTA/TGA, and it was considered as a combustion reaction followed by ignition of the precursor mixture. In case of spray combustion method, because insufficient contents of molecules and radicals generated from precursor droplets may lead an incomplete igmition, the ignition temperature of combustion chamber was chosen at $500^{\circ}C$. For diminishing aerosol coagulation, the droplet number concentration was reduced by filter media. The fluid was laminar with 2.5 seconds of aerosol residence time. The synthesized colloids had spherical shape with 180 nanometer size, and the crystalline phase was ZnO with hexagonal structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.523-523
• /
• 2013

대기압 제트 플라즈마는 의료산업 및 재료공정, 정수, 기체흐름 제어 등 다양한 분야에 적용을 위한 연구가 활발히 진행되고 있다. 뿐만 아니라 구동 조건에 따라 다양한 방전 모드가 존재하며, 이에 따라 발생된 플라즈마의 광학적 및 전기적 특성도 매우 다르게 나타나기 때문에 과학적으로도 새로운 현상들이 속속 발표되고 있다. 대기압 제트 플라즈마에서 중요한 과학적 현상 중 하나인 스트리머(streamer) 혹은 플라즈마 총알(plasma bullet)은 수-수십 kHz의 저주파 전압으로 구동 시 특정 조건에서 발생하는 현상으로, 최근 들어 시간분해능이 높은 ICCD 카메라를 이용하여 스트리머의 발생 및 전파에 대한 새로운 현상의 발견과 다양한 물리적 이해가 시도되고 있다. 본 연구에서는 헬륨 대기압 제트 플라즈마에 포함된 질소 함유량에 따른 다중 스트리머의 발생 및 기작의 이해를 시도하였다. 구동 전압 및 주파수, 헬륨기체의 유량, 전극 구조 및 간격 등 모든 조건이 동일한 상태에서 질소기체의 함유량을 증가시킬수록 특정 영역에서 스트리머의 개수가 증가하는 것을 관찰되었다. 또한 $N_2{^+}$의 방출광 세기가 헬륨 및 산소 원자의 방출광보다 지배적인 것으로 측정되었으며, 이는 헬륨 플라즈마에서 흔히 나타나는 헬륨 metastable에 의한 질소분자의 페닝 이온화(Penning ionization) 때문이다. 본 연구팀은 페닝 이온화($He^*+N_2{\rightarrow}He+N_2{^+}+e$)로 인해 추가적으로 발생하는 전자가 다중 스트리머 발생에 중요한 역할을 하는 것이라 제안한다. 좀 더 심화적인 분석을 하고자 헬륨-질소 플라즈마에서 주된 여러 가지 반응식을 이용하여 페닝 이온화에 의한 이온화율 및 전자의 직접적인 충돌에 의한 질소, 헬륨의 이온화율의 계산을 수행하여 특정 영역에서 헬륨의 이온화율보다 질소 페닝 이온화율이 더 커지는 것을 확인하였다.