• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.211-221
• /
• 2019

The death toll for every 10,000 cars registered in Korea is 1.4, which is still the lowest among OECD members, and the need for rescue and response systems is emerging. In response, the company is developing a vehicle ICT-based emergency rescue system (e-Call) that can handle accidents such as rapid and accurate life saving by automatically sending accident detection and related information to the central center in the event of a traffic accident. However, ordinary citizens are negative about the installation and cost of e-Call services. To solve these problems, various introduction and operation methods of e-Call were proposed for activation of terminal distribution. In addition, the effect of introducing e-Call was analyzed by predicting the penetration rate of e-Call terminals. Analysis shows that 463 to 926 deaths and 3,335 to 6,66.9 billion won will be saved in 10 years after the introduction of e-Call terminals.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.129-137
• /
• 2016

In the present study we verified performance of feed-forward control algorithm using short term prediction of ship motion information by taking advantage of developed numerical simulation model of FPSO motion. Up until now, various studies have been conducted about thrust control and allocation for dynamic positioning systems maintaining positions of ships or marine structures in diverse sea environmental conditions. In the existing studies, however, the dynamic positioning systems consist of only feedback control gains using a motion of vessel derived from environmental loads such as current, wind and wave. This study addresses dynamic positioning systems which have feedforward control gain derived from forecasted value of a motion of vessel occurred by current, wind and wave force. In this study, the future motion of vessel is forecasted via Brown's Exponential Smoothing after calculating the vessel motion via a selected mathematical model, and the control force for maintaining the position and heading angle of a vessel is decided by the feedback controller and the feedforward controller using PID theory and forecasted vessel motion respectively. For the allocation of thrusts, the Lagrange Multiplier Method is exploited. By constructing a simulation code for a dynamic positioning system of FPSO, the performance of feedforward control system which has feedback controller and feedforward controller was assessed. According to the result of this study, in case of using feedforward control system, it shows smaller maximum thrust power than using conventional feedback control system.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.191-197
• /
• 2018

With a population of more than 10 million people worldwide, MegaCity was only three in 1975, but it is expected to grow to 24 in 2013 and more than 30 in 2025 and more than 3 billion worldwide by 2050 It is expected to be absorbed into smart city. Especially in Asia and Africa, urbanization is expected to proceed rapidly. As the urbanization progresses and the population living in the cities increases, there are various problems such as rapid increase of energy consumption, congestion of traffic, various aging of the infrastructure and the like. As a result, smart city is emerging as a new alternative for solving urban problems. Smart City is rapidly expanding with the development of related technologies and can improve costs, improve urban services, improve quality of life, productivity and sustainability. Therefore, this paper analyzes the size and trend of the domestic and overseas smart city market, and analyzes the smart city related policies, trends and case studies of major countries to see the development status and market of smart city related industries, Present a business utilization model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.845-848
• /
• 2013

Due to intense climate changes and extreme weather conditions a noticeable decrease has been observed in the growth of certain plants. The indoor plant factories would have certain benefits including increase in crop yield, reduction in distribution cost, and maintains the healthy freshness level of the agricultural product. Recently, an artificial light source with optimum wavelength is spot lighted to fulfill the need of light for the indoor plant factories. The energy efficient light emitting diodes (LED) provide the essential light energy for the proper growth of indoor cultivated plants. This work focuses to utilize ubiquitous sensors network(USN) in providing suitable environment for the proper growth of agricultural product inside the indoor plant factory. The proposed system makes use of sensors and actuators, communicating each other through WPAN, ZigBee network. The proposed system obscured the traditional indoor plant factories with easy installation and wireless connectivity of the sensors and actuators along with eliminating the web of wires reducing the initial installation and maintenance cost.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.817-827
• /
• 2008

The seismic performance of a column splice fabricated with PJP (partial joint penetration) welds for special moment frames was experimentally evaluated in this study. The steel materials that were used for the specimens included SHN490 and SN490 steel, or the newly developed structural steel for seismic application. Fabricating the column splice with PJP welds is highly attractive from the perspective of reducing the welding cost and the construction time. PJP welds in column splices are viewed apprehensively, however, because several tests have shown that PJP welds in thick members tend to become brittle under tensile loads. The column splices in this testing program were designed for the expected plastic moment of the column that current seismic codes typically require. The design strength of partial-penetration welded joints was determined according to the 2005 AISC-LRFD Specification. Three-point loading was applied monotonically, using a universal testing machine, such thatthe column splice joints were subjected to pure tension. The test results showed that the PJP welded splices, if designed properly, can develop a strength exceeding that of the actual plastic moment of the column. The specimen made of the SM490 rolled section, however, showed a brittle fracture at the splice soon after achieving the actual plastic moment of the column. The tensile coupon test results also showed that the material properties of SM490 steel are more unpredictable. Overall, although the test data are limited, the SHN490 and SN490 steel specimens showed a superior and reliable performance.

• Journal of Animal Environmental Science
• /
• v.17 no.2
• /
• pp.61-70
• /
• 2011

This survey was conducted to investigate the current situation of ground condition of barn, moisture condition, feeding facilities, disinfection tool, etc. The data from a total of 305 farms were collected and analysed for establishment of managemental target in Hanwoo farm. The ground condition of barn was evaluated as a result of "moderate level" (46.4%). The moisture removal on the ground was conducted with the aid of electric fan (36.4%). The natural wind and sunlight should be used gradually for economic effect in farm. The exchange of floor straw was mostly conducted to remove the bad smell of barn (33.7%). 37.0% of farms had no the electric fan in internal barn, this instrument must be installed for control of body temperature and internal moisture in the future. Most of feeding facilities were operated by hand(88.2%). Modern farms should be installed with automatic feeding system. Farmer's skill of management was evaluated as a "2.80" of 5 points. Accordingly, farmers should be trained with high level of technical competitive skill. In conclusion, Hanwoo farms should be promoted and improved for enhancement of income through introduction to scientifically modern feeding skill.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.797-804
• /
• 2003

This study was conducted to determine the effect of feeding a mixture of broiler litter and bakery by-product on production, economy and meat characteristics of growing ‘Hanwoo’ steers. A control diet (conventional formulated feed and rice straw) and a treatment diet(90% mixture of broiler litter 64% and bakery by-product 36% and 10% rice straw on DM basis) were prepared on an isoenergetic basis and fed to 20 steers for 12 weeks. Palatability of TMR by ‘Hanwoo’ was fair. Compared with feeding a control diet, feeding a treatment diet resulted in increased(P〈0.05) DM intake, similar OM intake, similar daily weight gain(0.75 vs 0.64 kg/d) and feed efficiency of DM(10.1 vs 12.5) and OM(9.0 vs 10.6), considerably(45%) reduced(P〈0.05) feed cost/gain, and similar meat characteristics. These results show that a mixed ration manufactured with broiler litter and bakery by-product may be potentially used for growing ‘Hanwoo’ steers.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.111-124
• /
• 2011

The apartment' share of the housing has steadily increased and property assets have been valued in importance as the one of asset value. Information retrieval system using internet is particularly active in the real estate market. However, user satisfaction on real estate information system is not very high, and there is a lack of research on real estate retrieval to increasing efficiency until now. This study presents a new knowledge information system developed to consider region-related factor and individual-related factor in the real estate market. In addition it enables a real estate knowledge system to search various preferential requirements for buyers such as school district, living convenience, easy maintenance as well as price. We made a survey of the search condition preference of experts on 30 real estate agents and then analyzed the result using AHP methodology. Furthermore, this research is to build apartment ontology using semantic web technologies to standardize various terminologies of apartment information and to show how it can be used to help buyers find apartments of the interest. After designing architecture of a real estate knowledge information system, this system is applied to the Busan real estate market to estimate the solutions of retrieval through Multi-Attribute Decision Making(MADM). Based on the results of the analysis, we endowed the buyer and expert's selected factors with weights in the system. Evaluation results indicate that this new system is to raise not only the value satisfaction of user, but also make it possible to effectively search and analyze the real estate through entropy analysis of MADM. This new system is to raise not only the value satisfaction of buyer's real estate, but also make it possible to effectively search and analyze the related real estate, consequently saving the searching cost of the buyers.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.111-121
• /
• 2009

Value Engineering(VE) at design phase(so-called Design-VE) becomes quite a compulsory solution for better customer satisfaction, cost reduction, higher product performance, and, eventually, insured predominance in the competition. Unlike intended, however, the customer requirement on Design-VE has not been fully reflected in reality. Furthermore, the Design-VE occasionally does not progress in regular sequence; Preparation for measuring customer requirement - Function analysis - Idea creation. Therefore, this study suggests Axiomatic Design Theory to be adopted in Design-VE process expecting that the functions required by the customer could systematically reflected in VE process. Post-occupancy Evaluation(POE) is also represented as a method to measure and arrange the customer requirements. The customer satisfaction Design-VE process creates ideas defining functions in more detailed, to reflect the concrete user requirement. This approach helps function analysis and idea creation linked closely because function and idea are developed zigzag (i.e. function - idea - function...) in being decomposed into level down. The application of the process proposed by this study will be helpful to improve the customer requirement measurement and clarify a link between functions and ideas.

• Clean Technology
• /
• v.24 no.2
• /
• pp.87-98
• /
• 2018

Phosphorus (P) is an essential and irreplaceable element for all living organisms, and it is widely used as a fertilizer. Unfortunately, it is estimated that phosphate reservoir is depleted within about 100 years. Sewage sludge ash (SSA) is an alternative resource for P recovery because of its high P content. However, SSA cannot be directly used as a fertilizer due to heavy metals in it and low P bioavailability. Thermochemical treatment with Cl donor is known to reduce heavy metal contents and increase P bioavailability of SSA. Literature review on thermochemical technologies of SSA for the reduction of heavy metals and bioavailability enhancement has been carried out to estimate the status of current P recovery technology and to develop strategic future research plan for P recovery. The review showed that $CaCl_2$ and $MgCl_2$ were the most effective Cl donors and reaction temperature (< $1000^{\circ}C$) was the critical operation condition for the reduction. The removal efficiency depends on the species of heavy metals. Thermochemical technology of SSA for P recovery showed the possibility of commercial application in the near future to overcome the coming crisis of human sustainability by P depletion, but it needs cost effectiveness and more ecofriendly process to reduce energy consumption.