A total of ninety swine ($79.0{\pm}2.2\;kg$) were employed for 58 d to determine the meat quality of pigs fed fermented agricultural by-products (FAB) mainly consisting of brewers grain shell. FAB was replaced with commercial feed at dietary levels of 20%, 40%, 60%, 80%, and 100% (T1) and 30%, 60%, 100%, 100%, and 100% (T2) at 1, 2, 3, 4 and 5-9 wk, respectively. Compared with the control (CON) feed, FAD feed had lower moisture and nitrogen-free extract content, and higher crude fat, crude fiber, and total calorie (p<0.05). The protein content, amino acid profile, and pH values of pork loin were not affected by dietary treatment. However, higher moisture, crude ash, and meat cholesterol, and lower fat, were found in CON compared with treatment (p<0.05). FAB treatment significantly improved drip loss and cooking loss value (p<0.05), and increased the CIE $L^*$ values of loin and back-fat surface, whereas it decreased the CIE $a^*$ values of loin surface (pp<0.05). The results indicate that dietary FAB affected meat cholesterol and fat content, and improved drip loss and cooking loss, but had no affect on amino acid composition.
Kim, Ho-Joong;Kim, Young-Whan;Han, Sung-Koo;Shim, Young-Soo;Kim, Keun-Youl;Han, Yong-Chol
Tuberculosis and Respiratory Diseases
/
v.40
no.5
/
pp.509-518
/
1993
Background: By amplifying small amount of DNA, polymerase chain reaction (PCR) can be used for the detection of very small amount of microbial agent, and may be especially useful in certain cases which are difficult to be diagnosed microbiologically or serologically. Tuberculous pleurisy is a disease that can be diagnosed in only 70% of cases by conventional diagnostic tools, and PCR would be a very rapid, easy, and sensitive diagnostic method. Method: The specificity and sensitivity of PCR to detect Mycobacterium tuberculosis DNA were evaluated using various strains of Mycobacteria. To evaluate the diagnostic usefulness of PCR in tuberculous pleurisy, we used PCR to detect Mycobacterium tuberculosis DNA in pleural fluid. The amplification target was 123 base pair DNA, a part of IS6110 fragment, 10~16 copies of which are known to exist per genome. The diagnostic yield of PCR was compared with conventional methods, including pleural fluid adenosine deaminase (ADA) activity. Also, the significance of PCR in undiagnosed pleural effusion was evaluated prospectively with antituberculosis treatment. Results: 1) Using cultured Mycobacterium tuberculosis and other strains, PCR could detect upto 1 fg DNA and specific for only Mycobacterium tuberculosis and Mycobacterium bovis. 2) Using pleural effusions of proven tuberculosis cases, the sensitivity of PCR was 80.0% (16/20), and the specificity 95.0% (19/20). 3) Among 13 undiagnosed, but suspected tuberculous effusion, the positive rate was 60% in 10 improved cases after antituberculosis medications, and 0% in 3 cases of proven malignancy later. 4) Adenosine deaminase level of proven and clinically diagnosed tuberculous pleurisy patients was significantly higher than that of excluded patients, and correlated well with PCR results. Conclusion: We can conclude that PCR detection of Mycobacterium tuberculosis in pleural effusion has acceptable sensitivity and specificity, and could be an additional diagnostic tool for the diagnosis of tuberculous pleurisy.
Kim, Jee-Tae;Kim, Yong-Kee;Kim, Jong-Soo;Kwon, Soon-Won
Journal of the korean academy of Pediatric Dentistry
/
v.29
no.4
/
pp.509-518
/
2002
The purpose of this study was to evaluate the bonding of compomer to deciduous dentin which is known to have been developed to improve the weak properties of glass ionomer cement and composite resin. 120 sound primary molars were used for the shear bond strength test and another 24 for the scanning electron microscopic evaluation. Each material was ailed into polyethylene mold attached to exposed dentinal surface($3{\times}4mm$ in diameter) of sample blocks. Shearbond strength was measured using Universal testing machine and data were analyzed statistically with Oneway-ANOVA and Scheffe test. Scanning electron microscopic observation was performed in order to evaluate the pattern of distribution and penetration of resin tags and hybrid layer. Compomer groups(II-V) showed significantly higher bond strength values than glass ionomer group(I)(p<.05). Etching-compomer groups(III, V) showed the significantly higher bond strength than non-etching compomer groups(II, IV)(p<.05), but slightly lower values than composite resin group(VI) with no statistically significant difference(p>.05). No significantly different bond strength was found between compomer groups of different bonding system(p>.05). Scanning electron micrographs showed more irregular distribution of short and thin resin tags in non-etching compomer groups(II, IV) whereas the more regular and intimate distribution of long and thick tags in etching compomer groups(III, V) and composite resin group(VI). The evaluation of hybrid layer also showed more regular formation of thicker layer in etching compomer groups(III, V). Based on the results of present study, the use of compomer as an esthetic restorative material for primary molars might be justified.
Journal of the korean academy of Pediatric Dentistry
/
v.28
no.3
/
pp.441-446
/
2001
Flumazenil is a competitive antagonist of benzodiazepines. It is usually administered intravenously. However, if the intravenous route is not available then other routes of drug administration should be considered. This study was designed to evaluate the reversal effects of flumazenil after nasal administration. Twenty-five young, healthy adult volunteers participated in this clinical trial. The dosage of 0.08mg/kg midazolam was administered intravenously to induce deep sedation. Ten minutes after midazolam administration, 0.5mg of flumazenil was dropped nasally, over a period of one minute. Blood samples were taken to measure the concentration of midazolam and flumazenil at 0, 5, 10, and 20min after nasal administration of flumazenil, using High Performance Liquid Chromatography. The degree of sedation was evaluated with sedation score and bispectral index (BIS), Statistical analysis was performed by multivariate ANOVA and correlation analysis (P<0.05). Peak serum flumazenil concentration was reached in 10min. Sedation score decreased after midazolam administration and showed a significant increase after flumazenil administration. However, BIS decreased during the first 10min after midazolam administration and then no significant changes after flumazenil administration. There were two instances representing rapid and complete reversal of midazolam after intranasal administration of flumazenil. In conclusion, intranasal flumazenil administration may be effective in some patients when intravenous route is not available in condition of benzodiazepine overdose.
Positional accuracy of the on-board imager (OBI) isocenter with gantry rotation was presented in this paper. Three different type of automatic evaluation methods of discrepancies between therapeutic and OBI isocenter using digital image processing techniques as well as a procedure stated in the customer acceptance procedure (CAP) were applied to check OBI isocenter migration trends. Two kinds of kV x-ray image set obtained at OBI source angle of $0^{\circ},\;90^{\circ},\;180^{\circ},\;270^{\circ}$ and every $10^{\circ}$ and raw projection data for cone-beam CT reconstruction were used for each evaluation method. Efficiencies of the methods were also estimated. If a user needs to obtain an isocenter variation map with full gantry rotation, a method taking OBI image for every $10^{\circ}$ and fitting with 5th order polynomial was appropriate. However for a mere quality assurance (QA) purpose of OBI isocenter accuracy, it was adequate to use only four OBI Images taken at the OBI source angle of $0^{\circ},\;90^{\circ},\;180^{\circ}\;and\;270^{\circ}$. Maximal discrepancy was 0.44 mm which was observed between the OBI source angle of $90^{\circ}\;and\;180^{\circ}$ OBI isocenter accuracy was maintained below 0.5 mm for a year. Proposed QA program may be helpful to Implement a reasonable routine QA of the OBI isocenter accuracy without great efforts.
Choi, Yo Han;Min, Ye Jin;Jung, Hyun Jung;Jeong, Yong Dae;Kim, Jeong A;Cho, Eun Seok;Kim, Young Sin;Hong, Joon Ki
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.9
/
pp.432-439
/
2020
To improve the relatively low economic efficiency of the Korean native pig, the Korean National Institute of Animal Science developed a novel pig breed, the Woori black pig (W), by crossing Korean native and Duroc (D) pigs. This study was conducted to evaluate the effects of W as a terminal sire on growth performance, body shape, and retail cut yield of crossbred pigs. By using a completely randomized design, 32 crossbred pigs were allotted to one of two treatment groups based on terminal sire. The two groups were LYD [(Landrace × Yorkshire) × D sire] and LYW [(Landrace × Yorkshire) × W sire]. The experimental assessments were conducted over 53 days. The terminal sire breed had no significant effect on body weight (BW) at d 53, or on BW gain, average daily gain, or days to reach a 90 kg body weight. Moreover, there were no significant differences in body length, body height, or chest depth between the two groups. However, there was a significant difference (p < 0.05) in backfat thickness between the LYD (17.29 mm) and LYW (18.96 mm) groups. Loin yield of crossbred pigs in the LYW group (13.11%) was significantly lower (p < 0.05) than that in the LYD group (13.85%). By contrast, the Boston butt yield was significantly higher (p < 0.05) in the LYW group (8.99%) than in the LYD group (8.21%). In conclusion, these results suggest crossbred pigs sired by a Woori black pig had growth performance, shape, and retail cut yield (except loin yield) Ed. Note: I assume the lower loin yield is a negative factor so I included this wording. similar to those sired by a Duroc pig. The results showed no overall negative effect Ed. Note: I assume the lower loin yield is a negative factor so I used this wording. on crossbred offspring, indicating the suitability of the Woori black pig as a terminal sire.
For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$
Direct seeding of rice is a time- and laborsaving method, compared to machine transplanting. However, the area planted to direct-seeded rice is decreasing because of instability of seedling establishment, lodging, occurrence of weedy rice, and deterioration of grain quality. A newly developed wet-hill-seeding of rice, a type of direct seeding method, has shown features of growth similar to machine transplanted rice. This study was carried out to compare tillering pattern, heading characteristics and grain filling traits between transplanting and wet-hill-seeding in rice. Tillering of wet-hill-seeded rice was more vigorous than that of transplanted rice showing maximum tiller number 30~100% higher than transplanted rice. Wet-hill seeded rice showed later heading and shorter heading duration than transplanted rice. To find out the relationship between heading characteristics and grain filling traits, every panicle was tagged for flowering date, and the panicles on each heading date were inspected for grain filling traits. Wet-hill seeded rice and transplanted rice exhibited no significant difference in culm length, panicle length, the percentage of grain filling and perfect brown rice on each heading date during total heading period. Therefore, we conclude that wet-hill-seeding method is not inferior to machine transplanting in terms of seedling establishment, growth, grain filling and head rice yield.
Park, B.K.;Gil, J.M.;Kim, J.B.;Hong, B.J.;Ra, C.S.;Shin, J.S.
Journal of Animal Science and Technology
/
v.45
no.3
/
pp.397-408
/
2003
This study was conducted to examine the feeding effects of FFWBG (fermented feedstuff with wet brewer’s grain) and GS(grinding soybean) in Hanwoo steers. For this research, total twenty steers(average body weight : 455.7$\pm$25.9kg) were grouped into control(formula feed), T1(formula feed:FFWBG=60:40), T2(formula feed:GS=80:20), T3(formula feed:FFWBG:GS=50:40:10), and T4(formula feed: FFWBG:GS=40:40:20), each treatment was allocated to four steers. There was a tendency to be increased average daily gain in T1, T2, T3 and T4 compared with the control even though no statistical significance was found. The feed conversion of T1, T2, T3 and T4 were beneficially better than that of control(P<0.05; 8.25, 9.44, 6.69 and 7.71 vs 11.90, respectively). The blood urea nitrogen concentration of T4 was higher than that of control(P<0.05), but the creatinine concentration of T4 was lower than that of control(P<0.05). The glucose concentration of T1, T2, T3 and T4 were higher than that of control(P<0.05; 59.39, 62.44, 62.17 and 54.00 vs 51.00mg/$d\ell$, respectively). The back-fat thickness of T3 was thicker than that of control, T1, T2 and T4. The rib-eye area of T1, T3 and T4 was wider than that of control. Appearances percentage of ‘A’ ranked meat quantity were 66, 33, 75 and 33% in control, T1, T2 and T4, respectively.
Twelve pigs were used to investigate the effects of polyclonal antibody candidate against abdominal (AAb) and subcutaneous adipocyte membrane proteins (SAb) on body weight, fecaldigestibility and blood metabolites. When AAb and SAb developed by Choi et al. (2010) were injected to pigs, the numerical increase in BW (body weight) occurred at 4 weeks post-treatment, but BW for an entire period was also increased, indicating that the BW increase may not be affected by the antibodies injection. Antibodies treatment did not affect (P>0.05) fecal digestibility of dry matter, crude protein, crude fat and crude fiber. Fecal digestibility of crude ash for control (no treatment) at 2 weeks decreased, and that for non-immunized serum treatmentgroup at 4 weeks post-treatment increased, respectively (P<0.05). However, fecal digestibility of crude ash for AAb and SAb groups did not significantly change. At 4 weeks after the antibodies treatment, blood urea N concentration for AAb and SAb groups was significantly increased (P<0.05). However, these increases may not be caused by the antibodies treatment because similar pattern in blood urea N concentration occurred before the antibodies treatment. Antibodies treatment did not affect concentration of plasma glucose and triglycerides (P<0.05). Compared with control, concentration of plasma total cholesterol for AAb and SAb groups at 4 weeks post-treatment was significantly (P<0.05) decreased. This may suggest that body fat reduction possibly occurs. In conclusion, the AAb and the SAb developed by Choi et al. (2010) may have safety in nutritional physiological metabolism in pigs. Further study on in vivo fat reduction of the antibodies against abdominal and subcutaneous adipocytes of pigs should be required for fat-reduced pork production.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.