• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.1-10
• /
• 2011

This study was conducted to compare the growth of Zoysia japonica depending on different soil treatments in Saemangeum sea dike, which is filled with dredged soil. Zoysia japonica was planted using sod-pitching method on the control plot. On plots which were treated with forest soil and soil improvement, Zoysia japonica seeds were sprayed mechanically. Sixteen months after planting, coverage rate, leaf length, leaf width, and root length were measured and analyzed. Also, three Zoysia japonica samples per plot were collected to analyze nutrient contents. Coverage rate was 100% in B treatment plot(dredged soil+$40kg/m^3$ soil improvement+forest soil), in C treatment plots (dredged soil+$60kg/m^3$ soil improvement+forest soil), and D treatment plots (dredged soil+$60kg/m^3$ soil improvement), while only 43% of the soil surface was covered with Zoysia japonica on control plots. The width of the leaf on C treatment plots (3.79mm) was the highest followed by D treatment (3.49mm), B treatment (2.40mm) and control plots (1.97mm). Leaf and root length of D treatment was 30.18cm and 13.18cm, which were highest among different treatments. The leaf length of D treatment was highest followed by C, B, and A treatments. The root length of D treatment was highest followed by C, A, and B treatments. The nitrogen and phosphate contents of the above ground part of Zoysia japonica were highest in C treatment, followed by D, B, and A treatments. The nitrogen and phosphate contents of the underground part of Zoysia japonica were highest in D treatment, followed by C, A, and B treatments. C and D treatments showed the best results in every aspect of grass growth. The results of this study could be used to identify the cost effective way to improve soil quality for soil surface fixation on reclaimed areas using grass species.

• Journal of Korea Ship Safrty Technology Authority
• /
• no.7 s.25
• /
• pp.47-63
• /
• 2008

저항성능 측면에서 한국 어선선형의 특성을 파악하기 위하여, 본 연구에서는 한국과 일본에서 건조되어진 대표적인 어선을 한 척씩 선정하여 두 어선의 선형적 특성을 비교하였다. 또한 한국 어선의 선형적 특성들, 즉 일부 대표적인 선형요소들과 이를 제외한 기타의 국부적 선형특성들을 일본어선의 선형을 참고로 보정함으로써 우리나라 어선들의 저항성능을 향상시킬 수 있는 방안에 대하여 연구하였다. 한국어선과 일본어선은 해양환경과 어업의 종류가 다를 뿐만 아니라 관습적인 이유 등으로 선형의 차이가 있게 되며, 이것은 한국 어선이 일본 어선에 비하여 같은 배수량을 가지더라도 배 길이가 짧은 반면 폭이 넓으며 흘수가 얕은 대표적인 선형요소들의 차이로 확인할 수 있다. 이러한 차이를 고려하여, 일본어선들에 대한 유효마력 추정프로그램을 한국어선들에 맞게 보정.개발하는 과정을 통하여 양국 어선의 저항성능 차이를 확인할 수 있었으며, 보정된 프로그램을 이용하여 연구대상의 한국어선에 대한 저항저감효과를 줄 수 있는 선형요소들을 도출함으로써 선형요소들의 변화에 따른 저항성능 효과를 확인할 수 있었다. 그러나 선형요소들의 보정에도 불구하고 한국어선의 저항성능은 여전히 일본어선의 그것보다 떨어짐을 확인하여, 본 연구에서는 대표적인 선형요소들뿐만 아니라 국부적 선형특성 즉, 선수부에서 차인선(chine line) 경사도, 용골의 형상, 선미길이(용골 끝에서 선미단까지의 거리)를 각각 보정해 봄으로써 보다 더 큰 저항성능의 개선효과를 확인하였다. 본 연구결과는 앞으로 저항성능이 우수하면서도 실용 가능한 개량된 한국 어선선형의 개발에 기초적인 자료로서 활용이 가능할 것으로 사료된다.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.3
• /
• pp.27-36
• /
• 2002

Generally, it is known that urethane injection is excellent in long-term durability and environment friendly for ground improvement. However, urethane grouting has short rise time thus the penetration distance from the injection point is so short. Therefore, urethane injection cannot be used for the site where requires ground improvement in deep location from the injection point. Other injection materials such as cement cannot be alternatives when rapid hardening is required. From this study, we improve disadvantage urethane injection by developing TAS method. From the field tests, it is ascertained that TAS increases injection distance over 10m, which is further than that of original urethane grouting. In addition, TAS has relatively short Rise-time compared to cement grouting thus instantaneous improvement can be mobilized right after the injection. Short Rise-time and long penetration distance provide excellent applicability for tunnel construction.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.113-124
• /
• 2022

In wartime conditions, the communication system of military aircraft is exposed to jamming, and it is necessary to mount communication equipment with high anti-jamming performance in order to perform air operations smoothly even in an environment where jamming attempts are made. In this paper, we check in detail the jamming and anti-jamming technology that can be applied to wireless communication, and the data disclosed on the difference in specifications of the next-generation anti-jamming radio with frequency hopping method and the improvement of anti-jamming performance according to these changes. It was briefly analyzed within the scope. In addition, the points to be considered when designing a new domestic aircraft and the possibility of installing the next-generation anti-jamming communication equipment on the currently operating aircraft were confirmed, and the tactical usefulness of improving the anti-jamming capability of the next-generation anti-jamming communication equipment was confirmed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.153-158
• /
• 1997

Zr-2.5%Nb 합금에서 응력방향에 따른 DHC특성의 차이를 알아보고자 하였다. 판상의 CT시편을 이용하여 수소를 200 ppm 주입하고 응력을 압력관의 길이 방향으로 가하고 notch를 윈주방향으로 한 경우와 원주방향으로 응력을 가하고 notch를 길이 방향으로 한 경우의 균열전파속도를 측정하여 본 결과 길이 방향으로 응력을 가하였을 때 균열전파속도가 1/100 정도 감소하였으며, 균열발생을 위한 임계응력확대계수도 커짐을 알 수 있었다. 그리고 균열전파 방향도 원주방향으로 응력을 가하였을 때는 균열이 precrack을 따라 그대로 진행되었으나, 응력을 길이 방향으로 가하였을 때는 precrack을 따라 균열이 전파되지 못하고 균열분리 현상을 보였다 이것은 원래 모재가 보유하고 있는 집합조직과, 응력에의하여 수소화물이 재배열할 때 기존의 a상에서의 특정 방향 관계를 유지하여 석출함으로써 균열이 수소화물을 따라 전파됨이 원인인 것으로 생각된다. 응력을 원주방향으로 가하였을 때 균열주위에 수소화물이 길게 석출하지만, 응력을 길이 방향으로 기하였을 때는 수소화물이 20$\mu\textrm{m}$ 정도의 작은 크기로 분리된 균열과 같은 방향으로 분포하고 있음을 관찰하였다. 이로부터 집합조직을 개량함으로써 DHC저항성에 대한 효과를 얻을 수 있음을 확인 할 수 있었고 DHCV model에서 방향성을 수소화물의 재배열인자로부터 고려할 필요성이 있음을 알게 되었다.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.13-22
• /
• 2021

Pile or column supported embankments have been increasingly employed to construct highway or railway embankments over soft soils. Piles or columns of stiffer material installed in the soft ground can provide the necessary support by transferring the embankment load to a firm stratum using a soil arching. However, there has been reported to occur a relatively large differential settlement between the piles and the untreated soils. Geosynthetic reinforced pile or column supported embankment (GRPS) is often used to minimize the differential settlement. Two dimensional finite element anlyses have been performed on both the column supported embankments and the geogrid reinforced column supported embankments by using a PLAXIS 2D to evaluate the soil arching effect. Based on the results obtained from finite element analyses, the stress reduction ratio decreases as the area replacement ratio increases in the column supported embankments. For the geogrid reinforced column supported embankments, the geogrid reinforcemnt can reduce differential settlements effectively. In additon, the use of stiffer geogrid is appeared to be more effective in reducing the differential settlements.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.151-160
• /
• 1998

The Leuconostoc paramesenteroides dominated at refrigeration temperature range was isolated from kimchi, and improved its growth properties by mutation for competitive growth against Lactobacillus plantarum at lower pH. It was found that the minimal pH for the wild type Leuconostoc paramesenteroides Pw growth was pH 4.5 adjusted with HCI and pH 5.0 adjusted with organic-mixture (lactic acid:acetic acid=1:2), respectively. The mutant P-100 could grow in pH 4.0, 4.5, respectively, in MRS broth. Two strains Pw and P-100 were added into kimchi as starter and compared the quality characteristics of kimchi. The total acceptability of Pw and P-100 inoculated kimchi were evaluated better than that of control kimchi (no starter added) by sensory test and extended the optimal pH range of kimchi up to about 2.2, 2.5 times, respectively. In kimchi added P-100, the succinic acid was more abundant than others and the total number of Lactobacillus plantarum was down about 2.5 times in contrast to control kimchi.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.57-69
• /
• 2001

Sand pile is widely used as a ground improvement method. Although the primary purpose of constructing sand pile is accelerating consolidation, composite ground effect also can be gained by constructing sand pile. This study was accomplished to understand composite ground effect on the ground improved by sand piles which were applied as vertical drainage material when area replacement ratio was small relatively. For determining bearing capacities of origin ground and sand piles and analysing interaction between embankment and origin ground, bearing tests and earth pressure monitoring are performed. From the results, it turned out that the contribution of sand pile as a load bearing mechanism is not substantial. However, the bearing capacity of sand pile was increased to sixty percentages when compared with origin ground. The increasement of bearing capacity could be caused the change of consolidation characteristics during the process of consolidation by overburden load. Therefore, the composite ground effects depending on stiffness increasement of sand pile would be estimated as a factor decreasing consolidation settlement.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.1-7
• /
• 1999

This paper describes the modification of hull bottom for the air lubrication technique to the passenger boat in service at the Chung-Ju lake, which has a large beam-draft ratio. From numerical analysis of 2-D cavity problem by potential theory, the cavity shape, length and the pressure in cavity are estimated for the simplified geometry of hull bottom, and the non-dimensional parameters affecting air cavity phenomena are investigated. Extensive resistance tests for the model ship which has variation of step height and side strip have been performed to investigate the formation of air cavity and the drag reduction effectiveness. And also, the development of attached cavity to the bottom were observed from the flat bottom made by transparent acrylic plate. From this survey on the modification of bottom shape and the air lubrication technique, the total resistance of model ship could be reduced by about 25% at the design speed compared to the proto type hull form.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.235-247
• /
• 1998

The IIA(Inchon International Airport) which will function as the HUB airport in the northeast Asian region in the upcoming 21th century will be located in the reclaimed land with sand dredged in the vicinity of project area between Youngjong and Yongyu islands. The original ground is composed of soft clayey silt (ML) or silty clay (CL). The reclaimed land is classified as being SP-SM and having poor gradation of Cu<3 which resulted in the anticipation for difficulty in compaction (compaction index = 0.6~0.7). This anticipation shedded light on the necessity of performing test compactions for the thickness of 3~5meters of reclaimed land, aiming at the discovery of effective and economical compaction method. Upon the call for the test compaction performance 4 different compaction methods have been selected for trial from the research done on the international and local academic papers, past experience with compaction works, and their written materials. For the precise interparetation of test results, the ground survey and measurements have been performed. The Hydraulic Hammer Compaction has been chosen as the most optimum in accordance withe the test results.