• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.8
• /
• pp.703-710
• /
• 2012

At the stage of conceptual design of a helicopter, it is a general way using low fidelity analysis methods because of a large number of design calculations and trade-off studies. Determination of empirical parameters used in analysis codes for more practical design, depends on an user's design experiences, which effects on the accuracy and the fidelity of conceptual design results. Thus, more precise and logical method should be required to determine the empirical parameters used in the conceptual design of a helicopter. The present method is to be used not only in verifying the empirical parameters generated by design requirements, but also regenerate them if they contain any errors. Empirical parameters produced by present method were used to design a helicopter with a payload objective and performance constraints of an operating helicopter. As a result, weights and geometries of designed helicopter matched the target value within 5% significance level, proving that the suggested parameter generating method can be useful in the conceptual design of a helicopter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.923-930
• /
• 2009

In this paper, we introduce a satellite conceptual design software which can be used for outlining a new satellite as well as for educational purpose. This software consists of three commercial tools: MATLAB, STK(Satellite Tool Kit), and Excel. The management of the design software is done by MATLAB which provides basic calculations, GUI(Graphical User Interface), Excel data base management, and STK control. STK, an orbital simulation software developed by AGI, takes a part of obtaining accurate orbital information of a satellite. Excel, a product of Microsoft, is used for the data base of previous satellites and for the saving place of temporary and final results of the software. The conceptual design of a satellite is to roughly estimate power system and mass. In the power system design, the sizes of solar array and battery are determined. Based on the database of existing satellites, we can estimate the subsystems's mass fraction of a target satellite. Design examples for Kompsat 1 and 2 are suggested for verification of the developed software.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.103-106
• /
• 2011

현재 국내의 건설 산업은 BIM(Building Information Modeling)이라는 새로운 패러다임으로의 변화를 모색하고 있다. 이미 국내 건축업계에서는 적극적으로 BIM개념이 도입되고 있으며 주로 국가 기반시설의 건설업무를 분담하고 있는 토목업계에서는 현재 BIM개념을 도입하기 위한 준비과정에 있는 단계이다. 이 연구에서는 대표적인 토목구조물인 교량을 대상으로 BIM개념 도입의 필요성과 교량을 건설하기위한 여러단계 중에서도 그 출발점이라 할 수 있는 구조설계 단계에 있어서 BIM개념의 도입 방법과 기존의 구조설계 프로세스를 BIM기반의 구조설계 프로세스로 변화하기 위하여 필요한 작업들에 대한 분석을 수행하였으며 결과적으로 교량 프로젝트에 대하여 BIM기반의 구조설계를 위한 최적의 프로세스를 구축하기 위한 연구를 수행하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.568-583
• /
• 2015

In this paper, the conceptual design procedure and results of Earth observation satellite through Multidisciplinary Design Optimization (MDO) are described. The conceptual design equations for major parameters are developed based on the established database of Earth observation satellite so far. The MDO conceptual design tool for Earth observation satellite was developed by applying the Collaborative Optimization (CO) architecture amongst several MDO architecture techniques available today. The objective for this research was set to minimize the total mass of satellite as well as satisfy all design constraints by utilizing the Sequential Quadratic Programming (SQP) algorithm. Eventually the effectiveness of MDO conceptual design tool was verified through proposing a comparison between the conceptual design results with MDO applied and the design specification of ASNARO-1 & IKONOS-2 Earth observation satellite.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.33-36
• /
• 1993

본 과제는 의장설계 분야의 기본설계, 기능설계, 상세설계 및 생산설계 단계를 전산화하여 설계 생산성을 향상시키고 우수한 품질의 생산정보 및 생산관리 기초정보를 적기에 제공할 수 있는 의장설계일관시스템(Fig. 8.1)의 구축을 최종 목표로 하고 있으며, 다음과 같이 3개의 세부과제로 분담, 수행되었다. .CSDP-의장설계시스템 개발 : KRISO의장설계 일관시스템의 설계 및 관련 요소시스템의 통합 화를 위한 기반시스템의 개발'5' .CSDP-의장CAD응용기술 개발 : 현대중공업 범용 CAD시스템의 조선 전용화를 위한 의장설계 각 분야별 요구기능의 분석 및 정의'12' .CSDP-배관배치모델링기법 개발 : 대우조선 범용 CAD시스템을 토대로 한 배관설계시스템의 초기 계? 단계의 배치모델링 기법 개발'15' 본 고에서는 의장설계 일관시스템의 기본개념, 범용 CAD시스템을 중심으로한 분야별 일관시스 템의 구축을 위한 기능분석 및 기법 개발, 시스템 통합환경 구축, 그리고 향후 조선CIMS를 목 표로한 제품모델 개념의 생산지향 의장시스템 모델에 관한 개념설계 결과를 중심으로 서술하 였다.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.31-38
• /
• 2005

Conceptual design of an Aerostat was completed. Configuration was determined based on wind tunnel test results of aeostat hulls to have longitudinal static stability. Hull surface area and volume were obtained by using of Cubic spline method for given configuration and length. Final length of a hull was determined by iteration process. Cable tension and payload were estimated for conceptual design. A parametric study was performed for various weight and misson altitude. As results, a 30m class aerostat was designed and described.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.171-179
• /
• 2004

The design concepts of in-service inspection and maintenance are very important for the reactor system design of the nuclear power plant. The strategy of in-service inspection and maintenance should be reflected in the mechanical system design for the verification of the operability of liquid metal reactor KALIMER. In this paper the fundamental approaches of the in-service inspection and maintenance of the KALIMER are established to ensure the safety and reliability of the reactor system. The general method and requirement of the in-service inspection and maintenance for the reactor system and components are proposed and described to satisfy the intents of the ASME Section XI Division 3 and the design characteristics of KALIMER.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.27-35
• /
• 1992

By the help of computer graphics and rapid development of hardwares. GUI(Graphic User Interface) represented by WYSIWYG(What You See Is What You Get) changed user interface from liguistic model(e.g : command, etc.) to spatial model(e.g : pulldown menu, scroll bar, icon, itc.). This graphical user interface model for the ship conceptual design(MBASWIN) adopted event-driven programming technique and object-oriented concepts. Different from traditional design programs, MBASWIN is separate from the design program completely and controls all design modules. This enable a designer to accomplish a flexible designs.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.153.1-153.1
• /
• 2012

조립 후 발사대로 이송된 추진기관(또는 발사체)는 지상시험 및 비행시험을 위한 충전을 하게 되는데, 추진제 및 고압가스 등 추진기관 구성품의 운용절차는 하드웨어의 설계 단계에서 그 개념이 수립되어야 한다. 다시 말해, 발사체 및 추진기관 설계 단계에서 연료와 산화제의 충전/배출, 시험 취소시의 운용절차 개념이 수립되어 있어야 추진기관 구성품들의 설계, 지상인터페이스 구성품의 설계에 그 내용이 반영될 수 있다. 따라서, 본 논문에서는 발사체 및 추진기관 운용와 관련된 일반적인 충전/배출 절차와 지연 또는 취소시의 작업절차의 주요개념을 다루었고, 추진기관 운용에 필요한 각종 지상설비에 요구되는 주요 기능을 검토하였다. 또한, 추진제 충전 이후 발사 대기시까지의 업무와 발사 전에 수행되어야 하는 추진기관 운용 업무(Pre-Launch Operation)도 다루었다. 특히 다단 발사체의 경우에는 운용과 관련된 준비 업무량이 단수에 비례하여 늘어나므로, 효율적으로 모든 시험 준비 업무를 마치기 위해, 지상에서의 추진기관 운용절차는 각 단별로 유기적으로 진행되어야 한다. 즉, 각 단별 하드웨어에 대한 사전 검사, 충전, 대기 등의 운용시간 설계 및 그 절차가 중요하다. 한국형 발사체 및 추진기관의 운용 개념설계를 수행하는데에는 기 확보된 운용기술을 활용하였다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.53-63
• /
• 2010

The purposes of this study are to classify the characteristics of parks by park use patterns and the understanding of design concepts and to analyze the difference of cognition of design concept between designers and park users. The literature studies and surveys were performed to analyze park use patterns and understanding of design concepts for Seoul Forest Park, Yeouido Park and Seonyudo Park. Several statistical methods have been used such as descriptive analysis and importance-performance analysis. The results of this research are as follows. As the results of an analysis of park use patterns, Seonyudo Park may he qualified as an urban landmark park, while Yeouido Park can he classified as a neighborhood park. Seoul Forest Park bas characteristics of both. Second, the higher frequency of visits generally leads higher preference. Third, the overall cognition of the design concepts of parks shows 3.51 on average, which is comparatively high. The functional concepts are better transmitted to the users compared to abstract concepts. The cognition of the design concepts of each park are evaluated in the higher order of Seonyudo Park, Seoul Forest Park and Yeouido Park. Fourth, the cognition levels of detailed design concepts for each place are lower than the overall design concepts. On the other hand, levels of satisfaction are increased after the design concepts are noticed. It would he necessary make the effort to give information about the design concept of each space. The results of this study are limited in that it covers only three parks in Seoul, and did not consider seasonal variables. Nevertheless, this study may he significant in that it dealt with the cognition of design concepts for urban parks, focusing on the difference between designers and visitors.