• Fire Science and Engineering
• /
• 제12권3호
• /
• pp.21-30
• /
• 1998

This is a study on the relation of window glass breaking time, shape, and vent condition in a compartment fire through the experiment. We recognize the phenomenon that window glass breakage in a compartment fire be arose from the thermal stresses due to the temperature temperature difference was 233.4$^{\circ}C$ for test 1-3, 138$^{\circ}C$ for text 2-1, 83.6$^{\circ}C$ for test 2-2. The interior test 2-2, 400.9$^{\circ}C$ for test 2-3. so if the flame didn't reach at the surface of window glass, the breakage of glass occure at 40$0^{\circ}C$~50$0^{\circ}C$. when the fire size reached to 1541.14kW, the window might be broken by thermal stress. But window glass was not collapsed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제18권4호
• /
• pp.33-40
• /
• 2014

The final purpose of this study is to evaluate the seismic performance of unreinforced masonry (URM) building more accurately. For that, shear strength and hysteresis model considering failure mode of the URM wall were discussed. The shear strength of URM wall without openings could be calculated by determining on the minimum value between the rocking strength suggested by domestic research and the sliding strength suggested by FEMA. The wall having openings could be predicted properly by the FEMA method. And the nonlinear hysteresis models for flexural and shear behaviors considering failure mode were proposed. As the result of the nonlinear cyclic analysis that carried out using suggested models, these analysis models were proper to represent the seismic behavior of URM walls.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제11권4호
• /
• pp.505-513
• /
• 2000

This study suggests new antenna design for polarization diversity. For dual polarization, two port feeding lines are printed on two separate layers and cross-shaped aperture is located on ground between the substrates. For reducing back radiation, a reflector is attached around $\lambda$/4 behind feeding substrates. For wide bandwidth we use a perturbed patch with saw tooth shaped. This perturbation effect causes reduction of antenna size and also reduction of array size. With the antenna proposed here, $1\times4$ array dual polarization antenna for polarization diversity of PCS base station is built. One single element has as large as 10.3%, 11.3% bandwidths at each port, V.S.W.R less than 1.3 and the isolation is less than -40 dB, also array antenna has 13.2% 12.7% band bandwidth, V.S.W.R less than 1.3 the isolation below -36dB and the XPD of 10 dB.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제47권8호
• /
• pp.566-573
• /
• 2019

In order to obtain high-quality images by motion compensation in the airborne synthetic aperture radar (SAR), accurate motion sensing in image acquisition section is necessary. Especially, reducing relative position error and discontinuity in motion sensing is important. To overcome the problem, we propose a pre-parametric error modeling (P-PEM) algorithm which is a real-time motion sensing algorithm for the airborne SAR in this paper. P-PEM is an extended version of parametric error modeling (PEM) method which is a motion sensing algorithm to mitigate the errors in the previous work. PEM estimates polynomial coefficients of INS error which can be assumed as a polynomial in the short term. Otherwise, P-PEM estimates polynomial coefficients in advance and uses at image acquisition section. Simulation results show that the P-PEM reduces relative position error and discontinuity effectively in real-time.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제11권7호
• /
• pp.1247-1257
• /
• 2000

Offset-fed dish antennas are considered. Offset-fed dish antennas are widely used for DBS reception, the problem of offset-fed dish antenna has, however, received little attention because of its complicated and asymmetric geometry. A Fourier-transform technique and Physical Optics are employed to express the fields radiated from offset-fed reflector and feed horn aperture. The simultaneous equations are solved to obtain a solution in a fast convergent series, thus facilitating the numerical computation. For given parameters such as diameter of reflector, focal length, offset height of reflector center, exact solutions are derived. Since offset-fed dish antenna has an application as multi-beam antenna using multiple feed, a brief feasablity of dual beam antenna for Korea-SAT (116$^{\circ}$E, EIRP 59 dBW) and Orion-SAT (139$^{\circ}$E, EIRP 54 dBW) is given in Conclusion.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1662-1663
• /
• 2011

본 논문에서 하지 정맥 지료를 위한 마이크로파 시스템에서 사용될 가열 안테나의 전계 분포를 균일하게 형성시키기 위해 철사 도파관 안테나를 설계 및 제작하였다. 일반적인 도파관 안테나에 경우 안테나 중심 부분에 전계가 가장 세게 분포되어 온도가 다른 곳에 비해 차이가 많이 나므로 인체 피부가 회상을 입힐 위험이 있다. 제안된 철사 도파관 안테나는 끝단에 가느다란 철을 이용하여 전기장을 철사 부분에 집중시켜 안테나 중앙 부분에 집중된 전기장을 분산되도록 설계하였다. 따라서 전기장을 소스로 하는 온도도 균일하게 분포하게 된다. 제안된 철사 도파관 안테나 내부의 전계 분포는 Ansoft 사의 HFSS, 온도 분포는 CST 사의 MWS(Microwave Studio)를 이용하여 시뮬레이션을 하였고, 일반적인 안테나 경우보다 더 균일한 전계와 온도 분포 특성을 보임을 확인하였다. 제작된 철사 안테나는 사용주파수 15GHz에서 -10dB 이하의 반사 손실을 보였다. 또한 안테나 타당성을 검증하기 위해 개구면 앞에 돼지 껍데기를 두고 일정시간 가열하여 일반 안테나와 제안된 철사 도파관 안테나 온도 분포를 비교하였다. 열화상 카메라를 이용한 실험결과 일반 안테나에 경우 중앙과 가장 자리부분 사이에 약 $29^{\circ}C$, 제안된 철사 도파관 안테나에 경우에는 약 $12.5^{\circ}C$의 차이를 보였다. 이를 통해 제안된 철사 도파관 안테나가 전계 분포 균일성 향상에 기여함을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제41권9호
• /
• pp.747-754
• /
• 2013

This paper describes SCTE(System and Control unit Test Equipment) as an integrated test equipment for airborne SAR system and control unit. SCTE enhances reusability of test equipment by modular design for required functions and strengthens automatic testing and test convenience by providing functions such as script-based testing function and report generation function. Also, it includes a navigation data simulator which can simulate various flight conditions. In this paper, we details SCTE requirements, H/W and S/W design, implementation, and test results with control unit and SAR system.

• Journal of Advanced Navigation Technology
• /
• 제4권2호
• /
• pp.152-161
• /
• 2000

Recently, it is considered to combine the GPS receiver with the GLONASS for the improvement of performance and accuracy. This combined system reduces errors by SA for GPS, and has merits to select receivable satellite. In this paper, aperture-coupled patch antenna and small sized ceramic dielectric patch antenna are designed and implemented for GPS/GLONASS combined receiver, which show a wideband characteristics with circular polarization. The manufactured antennas have the bandwidth more than 240 MHz, VSWR less than 1.5:1, and the axial ratio less than 3dB, and satisfy required characteristics of the GPS/GLONASS antenna.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제11권6호
• /
• pp.135-141
• /
• 2008

In this paper, a design method of broadband horn antenna having 3:1 bandwidth and multiple polarization characteristics is proposed. The feeding section of the antenna adopts quadruple-ridged waveguide type for broadband and multiple polarization characteristics of the antenna. By inserting a shorting bar in the cavity structure with a semi-sphere type back short, the return loss at the feeding section was minimized. A corrugated dielectric lens is designed for phase compensation and lens-surface matching at the antenna aperture, which improves the antenna beam pattern. The validity of the design method is verified by indicating the measured data of the antenna.

• Korean Journal of Optics and Photonics
• /
• 제12권3호
• /
• pp.165-171
• /
• 2001

We discuss the influence of annular binary filters on the axial PSF of imaging systems which are apodized by a radiallysymmetric filter and have spherical aberration and coma. In this paper we consider a whole family of annular binary fIlters in two cases. First, the binary filters are composed of two transparent annuli of the same area. Second, the binary filters are composed of a central clear circle and a concentric annular aperture with area bigger than that of the inner circle. In order to investigate the influence of the proposed filters on the axial PSF, we may use the axial resolution gains, which evaluate in terms of the FWHM of the intensity in the focal region of an apodized imaging system in comparison with that corresponding to a nonapodized one. We evaluate the PSF for the conventional and confocal systems having an aberration. ation.