• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.84-91
• /
• 2011

Recently, WBAN(Wireless Body Area Network) which has progressed standardization based on IEEE 802.15.6 standardization is a network for the purpose of the short-range wireless communications within around 3 meters from the inner or outer human body. Effective QoS control technique and data efficient management in limited bandwidth such as audio and video are important elements in terms of users and loads in short-range wireless networks. In this paper, for high-speed WBAN IEEE 802.15.6 standard, the dynamic allocation to give an efficient bandwidth management and weighted fair queueing algorithm have been proposed through the adjustment of the super-frame about limited data and Quality of Service (QoS) based on the queuing algorithm. Weighted Fair Queueing(WFQ) Algorithm represents the robust performance about elements to qualitative aspects as well as maintaining fairness and maximization of system performance. The performance results show that the dynamic allocation expanded transmission bandwidth five times and the weighted fair queueing increased maximum 24.3 % throughput and also resolved delay bound problem.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.11-21
• /
• 2012

The Rankine(1857)'s earth pressure and the Hong and Yun(1995a)'s earth pressure was applied to analyze the lateral displacement of diaphragm wall applied to the Top-Down construction method using the computer program, which is a common design program for diaphragm wall. The lateral displacement estimated by the computer program was compared with the lateral displacement measured by inclinometer. The Rankine's earth pressure has been widely used to design the diaphragm wall in the analysis of computer program. As the result of comparison, the lateral displacement of diaphragm wall was predicted differently according to the applied earth pressures. The behavior of lateral displacement predicted by the Rankine's earth pressure was different with displacement measured by inclinometer and the lateral displacement at the bottom part was overestimated. However, the lateral displacement predicted by the Hong and Yun's earth pressure is similar to the behavior and maximum value of real displacement. Therefore, the Hong and Yun's earth pressure is more suitable than the Rankine' earth pressure to design the diaphragm walls applied to the Top-Down Construction Method.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.247-254
• /
• 2012

In this paper, we propose a concatenated diversity system to assure the data transmission reliability between flight type air nodes which move according to their atypical orbit, then its performance is analyzed using computer simulation and it is designed with hdl. The proposed system cannot only improve a bandwidth efficient and coding gain from diversity TCM code but also the reliability of data transmission is high. From the computer simulation result about bit error rate(BER) of the proposed system, we confirm that its BER performance is about 11dB greater than TCM code at $10^{-2}$ and about 11dB greater than space time block code at $10^{-3}$ which has a full diversity gain. In addition, when we compare its BER performance with space time trellis code which has both a diversity gain and a coding gain, the performance of the proposed system is greater than about 1.5dB at $10^{-5}$. Lastly, after designing the proposed system with HDL, we can confirm that the operation result is correct.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.183-188
• /
• 2009

HwaSeong (Suwon Fortress) was built during the reign of King Jeong-jo in the Choseon Dynasty. Detailed information on the construction of HwaSeong can be found in Hwaseong Seongyeok Euigui. In this sense, it is necessary to perform a comparative analysis on the Hwaseong Seongyeok Euigui based on construction management factors. This paper aims to analyze the HwaSeong construction project from a modern construction perspective by comparing and reviewing information related to the procurement of construction materials of the time. For this, wooden and steel materials and tiles were analyzed by supply area, supply channel, type and price. From the results of the analysis, it is found that the government used both private and official channels to supply materials. In particular, except for wooden materials that could be supplied from Bongsan, the supply of materials showed a high dependency on private channels. In terms of steel, it was almost 30 percent cheaper through private channels than when purchased through the official channel. Finally, materials vulnerable to damage like tiles were manufactured from the areas near the construction site. From this fact it can be interpreted that the government had a flexible procurement system, including manufacturing on the spot and external suppliers,depending on the property of the material. It is expected these analytical results will serve as key data to understand the management factors in constructing HwaSeong.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.357-363
• /
• 2014

Isoprene is a one of the biogenic volatile organic compounds (BVOCs) and it is known as a source of the tropospheric ozone and formaldehyde. In addition, isoprene is a trace component of the exhaled breath and it is a potential biomarker for the diagnosis of diseases such as lung cancer. In these regards, isoprene gas standards are required for the accurate measurement of isoprene in air samples. To establish a standard for isoprene gas, gravimetric preparation and characterization of primary gas standards were studied. The primary gas standards were produced independently in 4 aluminum cylinders and concentrations were examined by GC-FID. As a result, the uncertainty of the gravimetric preparations including purity of the raw material was 0.01% and reproducibility of the preparation of independent 4 cylinders was 0.08%. The primary gas standards for isoprene showed 14 months of long-term stability. The relative expended uncertainty of 2.8% (95% of confidence level, k=1.96) was assigned to the certified value of 10 ${\mu}mol$/mol level of isoprene based on the quantitative evaluation of the purity, weighing, reproducibility, adsorption and long-term stability.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.225-228
• /
• 2006

Purpose: Accurate clinical evaluation of the alignment of the calcaneus relative to the tibia in the coronal plane is essential in the evaluation and treatment of hindfoot pathologic condition. Previously described standard anteroposterior, lateral, and oblique radiographic methods of the foot or ankle do not demonstrate alignment of the tibia relation to the calcaneus in the coronal plane. The purpose of this study was to introduce hindfoot coronal alignment view. Material : 1) Both feet were imaged simultaneously on an elevated, radiolucent foot stand equipment. 2) Both feet stood on a radiolucent platform with equal weight on both feet. 3) Both feet are located foot axis longitudinal perpendicular to the platform. 4) Silhouette tracing around both feet are made, and line is then drawn to bisect the silhouette of the second toe and the outline of the heel. 5) The x-ray beam is angled down approximately $15^{\circ} to $20^{\circ} Result : 1) This image described tibial axis and medial, lateral tuberosity of calcaneus. 2) Calcaneus do not rotated. 3) The view is showed by talotibial joint space. Conclusion: Although computed tomographic and magnetic resonance imaging techniques are capable of demonstrating coronal hindfoot alignment, they lack usefulness in most clinical situations because the foot is imaged in a non-weight bearing position. But hindfoot coronal alignment view is obtained for evaluating position changing of inversion, eversion of the hindfoot and varus, valgus deformity of calcaneus.

• Korean Journal of Ecology and Environment
• /
• v.38 no.2 s.112
• /
• pp.137-145
• /
• 2005

Traditional screening techniques have missed up to 99% of microbial resources existing in the nature. Strategies of direct cloning of environmental DNAs comprising tine genetic blueprints of entire microbial metagenomes provide vastly more genetic information than is contained in the culturable. Therefore, one way to screening the useful gene in a variety of environments is the construction of metagenomic DNA library. In this study, the water samples were collected from Daecheong Reservoir in the mid Korea, and analyzed by T-RFLP to examine the diversity of the microbial communities. The crude DNAs were extracted by SDS-based freezing-thawing method and then further purified using an $UltraClean^{TM}kit$ (MoBio, USA). The metagenomic libraries were constructed with the DNAs partially digested with EcoRI, BamHI, and SacII in Escherichia coli DH10B using the pBACe3.6 vector. About 14.0 Mb of metagenomic libraries were obtained with average inserts 13 ${\sim}$ 15 kb in size. The genes responsible for degradation of 1, 2-dichloroethane (1, 2-DCE) via hydrolytic dehalogenation were identified from the metagenomic libraries by colony hybridization. The 1, 2-dichloroethane dehalogenase gene (dhlA) was cloned and its nucleotide sequence was analyzed. The activity of the 1, 2-DCE dehalogenase was highly expressed to the substrate. These results indicated that the dhlA gene identified from the metagenomes derived from Deacheong Reservoir might be useful to develop a potent strain for degradation of 1, 2-DCE.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.3
• /
• pp.1-8
• /
• 2020

The desulfurizers facility is cylindrical shape. To operate properly it needs nozzles cleaned, get rid of lime adhesion and sludge, repair the wear and corrosion of facility regularly. For this purpose, workers shall access the ceiling or vertical wall at high place. Ordinary scaffoldings such as steel pipe scaffolding or system scaffolding have been using so that workers can access them. With these ordinary scaffoldings, openings around cylindrical wall are inevitable which make workers can expose always to the risk of falling. The purpose of this study is to develop customized scaffolding to minimize the openings to prevent workers form falling during maintenance it. It consists of a hexagonal central tower and six trapezoidal outer towers. And the bracing among the towers have connected each other for self-standing and for maintaining the structure of towers. Span decks, the circumference footstools, steps, etc. are laid on each floor. The safety is reviewed by structural analysis and performance test. With this study, openings each floor of this scaffold are removed. The gap between the cylindrical wall and the edge of the work stage is approximately 100 mm. Therefore, we expect that workers can work safely and efficiently.

• Pediatric Infection and Vaccine
• /
• v.3 no.2
• /
• pp.185-193
• /
• 1996

Purpose : The incidence of measles was gradually decreased since 1963 when measles vaccination was firstly developed and liscenced in the world. But, recently the outbreaks of measles in infants and school children have been reported despite of wide spread use of measles vaccination. This study was performed to evaluate the efficacy of measles vaccination and the necessity of revaccination in Korean infants and children. Methods : 168 subjects of mothers and neonates, infants and children were enrolled in this study during the periods of 10 months from March to December in 1995. Measles specific IgG in the sera of mothers and children was measured using EIA kit (Sigma Co., MO, USA). Antibody titer of over or equal to 110 AU/ml was considered positive. Results : The results obtained were as follows. 1) Values of measles specific IgG in the sera of mother and neonate were 82.9 AU/ml and 89.3 AU/ml respectively and were rapidly decreased within 6 month after birth. Positive antibody levels (${\geq}$ 110 AU/ml) were observed in only 25 % of neonates. 2) In vaccinated children, values of measles specific IgG were 117.4 AU/ml in 9~15 month group, 76.9 AU/ml in 3~6 year group and 79.5 AU/ml in 10~15 year group after either one or two times of measles vaccination. Positive antibody levels in vaccinated children were observed in 57.7% of 9~15 month group, 38.4% of 3~6 year group and 34.7% of 10~15 year group. Conclusion : These results suggest that primary measles vaccination before 6 months of age can be considered and revaccination of measles should be recommended before 3~6 years of age. Further studies will be needed to clarify the reasons of high proportion of primary measles vaccination failure and to established the appropriate schedule of measles vaccination in korean infants and children.