• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.139-142
• /
• 2000

We present results based on FLAPW local spin density(LSD) calculations of double perovskite structure oxide L $a_2$MnFe $O_{6}$ . The total energy calculations with various spin structures show that this material has a stable ferromagnetic spin configuration. The ionic state of transition metals depend on the spin configuration $_Mn^{4+}$ and F $e^{2+}$ for ferromagnetic structure, M $n^{3+}$ and F $e^{3+}$ for ferrimagnetic structure). It is explained by super exchange interaction between transition metals. The calculated magnetic structure is well matched with recent experimental result.ult.t.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.50-57
• /
• 2001

Magnetic inductive probe was designed and assembled for sensing the residual stress developed in the ferromagnetic thin sheet. The residual stress measurement system with this probe could resolve the residual stresses developed in the sheet in terms of principal stress orientation, and magnitude of the principal stress. It was consumed that the obtained probe output voltage from the qualified ferromagnetic Fe-42Ni lead frame sheet and quality-rejected sheet is effectively determined using the developed device. The lead frame sheet which has accumulated a high level of residual stress always showed a distinctive stress distribution and magnitude compared with those of qualified lead frame sheet. Those differences were well resolved as functions of input current or used frequency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.195.1-195.1
• /
• 2014

최근 반자성 물질인 $MoS_2$를 수소 기체 속에서 열처리하게 되면 약한 강자성이 유발된다는 연구가 보고되었다. 본 연구에서는 강자성 발현을 수반하는 물리적 및 화학적 변화를 이해하기 위해서 단일층 $MoS_2$에 대한 라만분광 및 광발광 연구를 수행하였다. 기계적 박리법을 이용하여 $MoS_2$ 결정으로부터 단일층 및 이중층 $MoS_2$를 분리하여 $SiO_2/Si$ 기판에 전사한 후, $200^{\circ}C{\sim}500^{\circ}C$ 영역의 특정 온도에서 1시간 동안 열처리하였다. 배경 기체가 열처리 도중 $MoS_2$에 미치는 영향을 이해하기 위하여 수소 속 반응을 진공 상태와 비교하였다. 라만 스펙트럼에서는 큰 변화가 없었으나, 광발광의 세기는 수소 속 반응 후에 감소하고 진공 속 반응 후에는 증가하는 대조적인 결과를 보였다. AFM 측정으로부터는 열처리 후에 $MoS_2$ 표면에 뚜렷한 변화가 일어나지 않는다는 사실을 확인하였다. 본 발표에서는 수소와 진공 조건에서 관찰된 상이한 광발광 특성과 그래핀/$SiO_2/Si$에서 관찰된 p-형 도핑과의 상관관계를 설명하고자 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.350-357
• /
• 2015

Many countries have been developing and operating an underwater surveillance system in order to protect their oceanic environment from infiltrating hostile marine forces which intend to lay mines, conduct reconnaissance and destroy friendly ships anchored at the harbor. One of the most efficient methods to detect unidentified submarine approaching harbor is sensing variation of magnetism of target by magnetic sensors. This measurement system has an advantage of high possibility of detection and low probability of false alarm, compared to acoustic sensors, although it has relatively decreased detection range. The contents of this paper mainly cover the analysis of possible effectiveness of magnetic sensors. First of all, environmental characteristics of surveillance area and magnetic information of simulated targets has been analyzed. Subsequently, a signal processing method of separating target from geomagnetic field and methods of estimating target location has been proposed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.338-345
• /
• 2024

Magnetic anomaly signals from the ferromagnetic targets such as ships in the sea are measured by drone-based magnetic anomaly detection. A quantum magnetometer is suspended from the drone by 4 strings. Flight altitude and speed of drone are 100 m and 5 m/s, respectively. We obtain magnetic anomaly signals of few nT from the ships clearly. We analyze the signal characteristics by the ferromagnetic target through simulation using COMSOL multiphysics.

• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.129-133
• /
• 1997

To investigate the influence of the Hf concentration and the annealing effect in $Co_{1-x}Hf_x$(X=0.16, 0.24 at.%) systems, ferromagnetic resonance experiments have been carried out. Spin wave resonance spectra for all samples consist of several volume modes and one (or two) surface mode. It is suggested that both surfaces of the film have a perpendicular hard axis to the film plane (negative surface anisotropy). The surface anisotropy $K_{s2}$ at substrate-film interface is varied slowly from -0.07 to -0.32 erg/$\textrm{cm}^2$ and the surface anisotropy $K_{s1}$ at film-air interface is varied from 0.18 to -0.47 erg/ $\textrm{cm}^2$ with increasing annealing temperature in the amorphous $Co_{84}Hf_{16}$ thin films. Also, the surface anisotropy $K_{s2}$ is varied slowly from -0.31 to -0.41 erg/$\textrm{cm}^2$ and the surface anisotropy $K_{s1}$is varied from -0.19 to -0.60 erg/$\textrm{cm}^2$ with increasing annealing temperature in the amporphous $Co_{84}Hf_{16}$ thin films. We conjecture that the variation of surface anisotropy $K_{s1}$ is due to the increase of Co concentration resulted from Hf oxidation for low temperature annealing(150~175 $^{\circ}C$) and the diffusion of Co atoms near the film surfaces for high temperature annealing (200~225 $^{\circ}C$).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1075-1081
• /
• 2010

Recently, the results of many studies have clarified the successful performance of magnetostrictive transducers in which a ferromagnetic patch is used for the transduction of guided shear waves; this is because a thin ferromagnetic patch with strong magnetostriction is very useful for generating and detecting shear wave. This investigation deals with bulk shear wave transduction by means of magnetostriction; on the other hand, the existing studies have been focused on guided shear waves. A modular transducer was developed; this transducer comprised a coil, magnets, and a thin ferromagnetic patch that was made of Fe-Co alloy. Some experiments were conducted to verify the performance of the developed transducer. Radiation directivity pattern of the developed transducer was obtained, and a test to detect the damage on a side drill hole of a steel block specimen was carried out. From the results of these tests, the good performance of the transducer for nondestructive testing was verified on the basis of the signal-to-noise ratio and narrow beam directivity.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.187-190
• /
• 2010

$Sn_{0.99}{^{57}Fe}_{0.01}O_2$ prepared by a sol-gel method, and studied by x-ray diffractometer, vibrating magnetometer, Superconducting quantum interference devices and M$\ddot{o}$ssbauer spectroscopy. the crystal structure were found to be a rutile tetragonal structure with space group $P4_2$/mnm, and oxygen deficiency are 5.6 % by Rietveld refinement. magnetization value were $M_s=1.95{\times}10^{-2}{\mu}_B/Fe$ at room temperature, and Curri-weiss temperature were and ${\theta}_{cw}$ = 18 k, measurement of VSM and SQUID, respectively. Mssbauer spectra of $Sn_{0.99}{^{57}Fe}_{0.01}O_2$ have been Sextet taken at various temperatures ranging from 4.2 K to RT, and isomer shift value $\delta$ = 0.18~0.36 mm/s of $^{57}Fe$ ion site all of the temperature range the state shows ferric.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.157-157
• /
• 2009

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.153-160
• /
• 2002

Based on a generalized variational principle for magneto-thermo-elasticity, a theoretical model is proposed to describe the coupled magneto-thermo-elastic interaction in soft ferromagnetic plates. Using the linearized theory of magneto-elasticity and perturbation technique, we analyze the magneto-elastic and magneto-thermo- elastic instability of simply supported ferromagnetic plates subjected to thermal and magnetic fields. A nonlinear finite element procedure is developed next to simulate the magneto-thermo-elastic behavior of a finite-size ferromagnetic plates. The effects of thermal and magnetic fields on the magneto-thermo-elastic bending and buckling is investigated in some detail.