• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2011

This paper proposes a new fuzzy load torque observer and a fuzzy speed regulator to guarantee a robust speed control of a permanent magnet synchronous motor (PMSM). Also, the LMI conditions are given for the existence of the fuzzy load torque observer and fuzzy speed controller, and the gains of the observer and controller are calculated. The stability of the proposed control system is analytically proven. To validate the effectiveness of the proposed observer-based fuzzy speed controller, the simulation and experimental results are presented. Finally, it is definitely demonstrated that the proposed control algorithm can be used to accurately control the speed of a PM synchronous motor.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.131-134
• /
• 2002

일반적인 산업현장에서 많이 사용되는 이중탱크 시스템은 동작점 근방에서 선형화하는 고전제어기법을 사용한 것으로서 큰 시간지연과 비선형성으로 인해 정확한 수학적 모델링이 어렵고 모델링을 하더라도 넓은 동작 영역에서 만족스로운 결과를 얻기 어렵다. 따라서, 비교적 모델링에 대한 의존도가 낮은 퍼지, 신경회로망, 유전알고리즘 등의 지능제어 기법들도 제안되고 있다. 그러나 이들 제어기 역시 외란이나 다양한 동작 모드들에 따른 제어기 변수들의 적응성 저하로 인해 안정화 가능 영역이 협소해 지는 것은 물론 시스템의 불안정 현상도 초래한다. 이에 반해, SMC(sliding mode controller)는 변수의 변동, 외란에 둔감한 강점을 갖고 있지만, 시스템의 상태에 따른 슬라이딩 평면 설정의 곤란성과 채터링(chattering)이 존재하는 문제점 이 있다. 따라서 본 논문에서는 이중 탱크 시스템의 정밀한 수위 제어를 위하여, GA과 FLC를 사용하여 최적 변수로 설정 할 수 있게 하고, 채터링 저감을 위해 시스템 동특성 변동과 외란 에 강인한 GA-FSMC(genetic algorithm fuzzy sliding mode controller)를 제안하였다. 시뮬레이션을 통해 종래의 제어기의 제어결과와 비교함으로써 제안하는 GA-FSMC의 우수성을 입증하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.88-98
• /
• 2000

In this paper, a robust controller using $H_{\infty}$ control theory has been designed for the load frequency control of interconnected 2-area power system. The main advantage of the proposed $H_{\infty}$ controller is that uncertainties of power system can be included at the stage of controller design. Representation of uncertainties is modeled by multiplicative uncertainly. In the mixed sensitivity problems, disturbance attenuation and uncertainty of the system is treated simultaneously. The robust stability and the performance of model uncertainties are represented by frequency weighted transfer function. The design of load frequency controller for each area was based on state-space approach. The comparative computer simulation results for the proposed controller and the conventional techniques such as the optimal control and the PID one were analyzed at the additions of various disturbances. Their deviation magnitude of frequency and tie line power flow at each area were mainly evaluated. Also the testing results of robustness for the cases that the perturbations of the all parameters of power system were amounted to about 20% were introduced. It was approved that the resultant performances of the proposed $H_{\infty}$ controller with mixed sensitivity were more robust and stable than the one of conventional controllers.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.44-49
• /
• 2011

This paper proposes a robust digital speed regulator for a surface-mounted permanent magnet synchronous motor(SPMSM). The proposed speed controller uses a simple digital load disturbance resistance scheme which does not require a load torque observer, so it can be easily and simply implemented without degrading the control performance. To validate the effectiveness of the proposed control algorithm, experimental results as well as simulation results are shown under motor parameter variations using a prototype SPMSM driving system. Finally, it was confirmed that the proposed method can precisely regulate the speed of the SPMSM.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.9 no.1
• /
• pp.59-69
• /
• 2001

The rotor blade is modeled using a composite box beam with arbitrary wall. The active constrained damping layers are bonded to the upper and lower surfaces of the box beam to provide active and passive damping. A finite element model, based on a hybrid displacement theory, is used in the structural analysis. The theory is capable of accurately capturing the transverse shear effects in the composite primary structure, the viscoelastic and the piezoelectric layers within the ACLs. A reduced order model is derived based on the Hankel singular value. A linear quadratic Gaussian (LQG) controller is designed based on the reduced order model and the available measurement output. However, the LQG control system fails to stabilize the perturbed system although it shows good control performance at the nominal operating condition. To improve the robust stability of LQG controller, the loop transfer recovery (LTR) method is applied. Numerical results show that the proposed controller significantly improves rotor aeromechanical stability and suppresses rotor response over large variations in rotating speed by increasing lead-lag modal damping in the coupled rotor-body system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.41-48
• /
• 2002

This study is on the structural control experiment for a small scale three-story building structure employing on active mass damper subjected to earthquake loading. $\mu$-synthesis controllers, which belong to robust control strategies, were designed and their performance were experimentally verified. Frequency-dependent weighting functions corresponding to disturbance input and controlled output were defined and combined to produce optimal $\mu$-synthesis controllers. The experiment result shows 60-70% reduction in RMS responses under the band-limited white noise excitation and 30-45% reduction in peak responses under the scaled earthquake excitations. Good agreement was obtained between the simulations based on the identified mathematical model and experimental results. And the simulations for the system with uncertainties show that the designed controllers are robust within a specified range of uncertainties.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.541-542
• /
• 2011

최근 산업현장에서 작업의 정밀도에 대한 요구가 높아지면서 산업용 로봇의 정밀위치제어에 대한 연구가 활발히 이루어지고 있다. 특히 정밀 위치제어가 요구되는 산업용 로봇에서 외란은 로봇의 성능에 영향을 미치는 중요한 요소 중의 하나이다. 본 논문에서는 다관절 로봇에 사용되는 AC서보 모터의 고강성 정밀 위치제어를 위해 외란 변화에 대한 강인한 제어를 할 수 있는 외란 관측기와 파라메터 변동에 따른 보상 알고리즘을 제안하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통해 외란 변화에 대해 정밀한 위치제어가 가능함을 보였다. 또한, 다관절 로봇의 각 축에 적용되고 있는 AC서보 모터의 PID 제어기와 제안된 알고리즘과의 비교를 통해 부하 변동에 따른 두 제어기의 차이점을 보였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.213-214
• /
• 2018

본 논문에서는 전기자동차 온-보드 충전기용 단상 cycloconverter-type high frequency link 컨버터의 전력 제어성능과 동적 응답특성을 개선하기 위하여 예측전류제어 기법을 적용한다. 배터리를 충전 및 방전하기 위하여 전력계통에 연결되는 V2G 충전기는 전압 변동, 고조파 왜곡 등의 외란 발생에도 강인한 동적 응답 특성을 유지하여야 한다. 예측전류제어 기법이 적용된 제어기는 계통 외란이 존재하는 경우에도 전력 레퍼런스를 빠르게 추적하고 정확한 듀티를 생성할 수 있으므로 우수한 동적 및 과도 응답특성을 갖는다. 제안하는 제어기의 성능과 파라미터 변동에 대한 민감도는 PSIM 시뮬레이션을 이용하여 평가되며, 여러 계통외란 상태에서 PI 제어기와 비교된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.289-292
• /
• 2005

PID controllers, which have been widely used in industry, have a simple structure and robustness to modeling error. But it is difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose an adaptive PID controller based on a gradient descent learning. This algorithm has a simple structure like conventional PID controller and robustness to system parameters variation. To verify performances of the proposed adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.352-360
• /
• 2010

This paper proposes a precise position control of an automatic door using a disturbance observer. Although the conventional PID controller is usually used for an automatic door system, the demand of the robust controller considering the parameter deviations and disturbances is increasing due to the various size and weight of a door. The linear model for an automatic door system is presented. Based on this model, the LQR controller using a state feedback controller and an observer are suggested. A disturbance observer to compensate the undesirable factors is also proposed. Simulation and Experimental results are presented to illustrate the feasibility of the proposed control strategy.