• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1183-1192
• /
• 1989

본 논문에서는 평면변형률 상태하에서 안정하게 성장하는 균열선단에 집중 되어있는 강소성역의 해석에 역점을 두어 재결정법과 탄.소성유한요소법을 도입하여 안정 성장균열 선단에 형성되는 균열 성장저항에 직접적인 영향을 미치고 있는 소성 역의 크기나 형태에 대한 실험 및 해석을 하였다.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.36-45
• /
• 1989

아이어닝 공정은 제품의 치수정밀도가 정확하게 조절괴는 정밀 금속 성형공정이다. 아이어닝 공정은 대개 냉간상태에서 행하여지며 그리고 때로는 단공정 대신에 다단식이 적 용된다. 본연구의 목적은 강소성 유한 요소법으로 단공정과 다단식 아이어닝 공정을 해석하 여 아이어닝 공정에 대한 적절한 설계변수와 최적 설계조건을 찾는데 있다. 본 연구에서는 공정설계게 있어서 공정변수를 다이의 원추각과 단의 개수로 주었다. 본 해석에서는 단공정 아이어닝과 다단식 아이어닝 공정의 성형하중, 응력과 변형도 분포 그리고 격자 변형을 계 산하였다 그리고 이 값들에 대한 공정 변수의 영향을 검토한 결과 성형하중과 격자 변형에 있어서 계산 결과와 잘 일치하였다.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.302-321
• /
• 1995

A method of determining an optimum blank shape for the non-circular deep drawing process is investigated. The rigid-plastic finite element method is introduced and the computer program code is developed. The ideal shape of a drawn cup with uniform wall height is assumed and metal flow is traced back-ward step by step to predict an initial blank shape of the ideal cup. For examples of the non-circular deep drawing products, three cases of drawn cup with quadrilateral punch shape are considered and optimum blank shapes for each case are proposed and compared with experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.40-44
• /
• 1997

The governing functional in plastic deformation has to satisfy the incompressible condition. This incompressible condition imposed on the velocity fields can be removed by introducing either the Langrange multiplier or the penalty function into the functional. In the study two-dimensional rigid plastic FEM programs using by Lagrange multiplier and penalty function are developed. A compression of cylinder and a spike forging are simulated to compare the data of loads, local mean stresses and reductions of volume.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.57-61
• /
• 1997

The governing functional in plastic deformation has to satisfy the incompressible condition. This incompressible condition imposed on the velocity fields can be removed by introducing either the Langrange multiplier or the penalty function into the functional. In this study two-dimensional rigid plastic FEM programs using by Langrange multiplier and penalty function are developed. A compression of cylinder and a spike forging are simulated to compare the data of loads, local mean stresses and reductions of volume.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1844-1853
• /
• 1995

Theoretical and experimental drawing characteristics for the single circular and square drawbeads are discussed. During the blank holding process, the strain distributions of upper and lower skins of specimens, and the die reactional forces are analysed by F. E. M., and they are compared with the experimental results. The drawbead restraining forces and strain distributions for the drawn specimens by the various drawing length are also analysed and compared with the experimental results. It is concluded that the theoretical simulations and results could be very useful for the prediction of real cases.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.80-83
• /
• 1999

Rigid Plasticity Finite Element Analysis is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric square dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric square dies is caused by the eccentricity of square dies. The deviated velocity is changed with the distance form the center of cross-section of the workpiece. The results show that the curving of products and the shapes of the dead metal zone are determined by Rigid Plasticity Finite Element Analysis and that the curvature of the extruded products increases with the eccentricity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.205-209
• /
• 1998

Unlike the drawing of round section from round bar, the shaped drawing like polygonal section is known to have influence not only drawing stress but also comer filling. Therefore, this study analyze the drawing process of suqare rod from round bar using nonsteady state rigid-plastic FEM. To investigate effects of process variables of the drawing process of square rod from round bar, FE-simulations with variety of reduction in area and semi-die angle for a given frictional condition have been conduction. By this results, it has to suggest optimal process condition on the drawing stress and the comer filling. In addition, it has determined forming limit considering necking and bulging.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.99-102
• /
• 1999

In this study, to investigate the effect of process variables such as reduction in area, semi-die angle and the rectangular ratio to the corner filling which influences the dimensional accuracy of the final product in the drawing of the cluadrangle rod from a round bar, it has been simulated by three dimensional rigid-plastic finite element method. In order to reduce the number of simulation artificial neural network has been introduced. Also, through the experimental investigation, the present results have been implemented on the industrial product. In results, the main process variable is the combination of the semi-die angle in case of the irregular shaped drawing process and reduction in area in the event of regular shaped drawing process, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.103-107
• /
• 1999

In this paper, a computer simulation technique for the forging process having a floating die is presented. The penalty rigid-plastic finite element method is employed together with an iteratively force-balancing method, in which the convergence is achieved when the floating die part is in force equilibrium within the user-specified tolerance. The force balance is controled by adjusting the velocity of the floating die in an automatic manner. An application example of a three-stage cold forging process is given.