• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.275-282
• /
• 2014

Particle-reinforced metal matrix composites exhibit a strengthening effect due to the particle size-dependent length scale that arises from the strain gradient, and thus from the geometrically necessary dislocations between the particles and matrix that result from their CTE(Coefficient of Thermal Expansion) and elastic-plastic mismatches. In this study, the influence of the size-dependent length scale on the particle-matrix interface failure and ductile failure in the matrix was examined using finite-element punch zone modeling whereby an augmented strength was assigned around the particle. The failure behavior was observed by a parametric study, while varying the interface failure properties such as the interface strength and debonding energy with different particle sizes and volume fractions. It is shown that the two failure modes (interface failure and ductile failure in the matrix) interact with each other and are closely related to the particle size-dependent length scale; in other words, the composite with the smaller particles, which is surrounded by a denser dislocation than that with the larger particles, retards the initiation and growth of the interface and matrix failures, and also leads to a smaller amount of decrease in the flow stress during failure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1335-1343
• /
• 2012

In this study, the lightweight modular design of hybrid railway carbody structures made of sandwich composites and aluminum extrusions was investigated by using topology and size optimization techniques. The topology optimum design was used to select the best material for parts of the carbody structure at the initial design stage, and then, the size optimum design was used to find the optimal design parameters of hybrid carbody structures using first-order and sub-problem methods. Through the topology optimization analysis, it was found that aluminum extrusions were suitable for primary members such as the underframe and lower side panel module to improve the stiffness and manufacturability of the carbody structures, and sandwich composites were appropriate for secondary members such as the roof and middle side panel module to minimize its weight. Furthermore, the results obtained by size optimization analysis showed that the weight of hybrid carbody structures composed of aluminum extrusions and sandwich composites could be reduced by a maximum of approximately 17.7% in comparison with carbody structures made of only sandwich composites.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.67-72
• /
• 1994

현재 가전제품의 개발방향은 고효율화, 다기능화와 더불어 환경문제를 고려하는 방향으로 진행되고 있다. 환경문제로는 여러가지가 거론되고 있는데 제품의 소음에 대한 문제도 이제는 성능의 관점에서와 더불어 환경의 문제로도 인식되어야 한다고 생각한다. 특히 고속의 팬종류가 사용되는 가전제품에 있어서 저소음 성능은 판매력에 직접영향을 미치는 중요 판매전략으로 대두되고 있는 상황이다. 진공청소기는 가전제품중에서 매우 시끄러운 제품중에 속한다. 그 이유는 모타가 분당 30,000회 이상의 고속회전을 하면서 축에 연결되어 잇는 임펠러를 회전시켜 공기를 흡입, 배출시키는 일련의 작동을 하면서 여러가지 진동 및 유체소음을 일으키기 때문이다. 팬모타에서 발생한 소음과 진동은 여러가지 복잡한 전달경로를 거쳐서 외부로 전달되어진다. 따라서 청소기의 전체적인 소음을 감소시키기 위한 대책으로는 크게 두가지 방법으로 나누어 생각해 볼 수 있는데, 그 첫번째가 주된 소음원인 팬모타의 소음특성을 개선하는 방법이고 다른 하나는 팬모타로부터 발생된 소음이 밖으로 전달되는 경로를 적절하게 차단하는 방법으로서 청소기 내부에서 여러가지 방법을 사용하여 소음을 저감시키는 방법이다. 본 연구에서는 첫번째 방법인 팬모타의 소음을 감소시키는 대책들에 대하여 중점적으로 기술하려고 한다. 그 이유는 청소기 내부의 구조개선을 통하여 소음을 저감시키는 방법은 그동안 많이 실시되어 실험결과들이 축적되어 있는 반면 그 방법의 실시에는 구조적인 문제점 등 한계가 있기 때문에 더욱 조용한 청소기를 개발하기 위하여는 주된 소음원인 팬모타의 소음을 낮추어야 할 필요가 절실하게 요구되고 있기 때문이다.래그(drag) 토크의 영향과 치타음 저감을 위한 개선된 클러치 특성을 제시하였다. 클러치는 동력을 전달 또는 차단하는 기능 뿐만 아니라 엔진이나 변속기에서 발생하는 소음이나 진동을 저감시키는 기능을 가지고 있다. 따라서 엔진 공회전시에 발생하는 치타음(rattle noise)이나 비틀림 진동을 저감시키는 방법으로는 여러가지가 있으나 클러치 디스크(clutch disc)의 비틀림 기구의 설계 인자들을 적절히 조절함으로써 변속기의 인풋기어에 전달되는 비틀림 진동을 저감시키는 방법이 일반적으로 수행되어지고 있다. 본 연구는 4 실린더 4 싸이클 1.5L 엔진을 장착한 경승용차의 실차실험을 통해 공회전시 엔진 플라이휘일과 인풋기어에서의 회전수 변동을 측정하고, 이 실험 데이타를 기초로 하여 엔진 토크 및 변속기에서의 드래그 토크를 계산하여 엔진-변속기 인풋기어의 반한정계 2자유도 진동모델과 비틀림 특성을 가진 클러치 디스크의 프리댐퍼 영역에 대해 시뮬레이션을 수행하여 클러치 비틀림 기구의 설계인자인 비틀림 강성, 히스테리시스 토크에 따른 비틀림 진동 저감 효과를 연구하고자 한다.성을 확인하였다. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile where

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.555-567
• /
• 2013

Slim floor system using deep decks has been developed and employed in Europe to reduce the floor height of steel structures. Although long span buildings involving the issue of reducing floor height are being increasingly built in Korea, employing deep decks in more than 7m long span structures is likely to cause problems associated with excessive deflection. This study is applied to the long-span concrete casting of the deep deck plate usability of deflection due to bending and torsional instability of open cross-section, as a way to improve the problem of cap plates are suggested, and the optimum length of reinforcement and location are derived from theoretic estimation. The cap plates are placed on the deep decks with regular intervals to overcome the instability of open sections, improve the stiffness of the sections and control the deflection at the centers. The improvement in flexural capacity associated with the location of the cap plates and the length of reinforcement are verified through analysis and test.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.943-948
• /
• 2012

This study was conducted to estimate the effect of nitrogen reduction by applying ryegrass and to determine the relationship between yield and nitrate concentration of soil solution for cucumber cultivation in plastic film house. Nitrogen levels with recovery of ryegrass ($42.3Mg\;ha^{-1}$) was 0, 50, 75, 100 % of 199 kg N $ha^{-1}$ as N recommendation by determining soil EC value. Yield and nitrate concentration in soil solution was investigated during cucumber cultivation. Yields of N treatments applied ryegrass showed 64.3, 70.9, 70.3, and $76.5Mg\;ha^{-1}$, respectively, it could reduce about 25-50% of nitrogen application compared to yield ($68Mg\;ha^{-1}$) of NPK plot applied 199 kg N $ha^{-1}$. Nitrate concentration in soil solution was average 26.0, 30.1, 41.4, $58.5mg\;L^{-1}$ during cucumber cultivation and was related between yield and average nitrate concentration of soil solution following as; $Y=49.3+0.63X+0.0034X^2$ ($R^2=0.778^{**}$). However, it needs to conduct extra-experiment due to high variation of nitrate concentration during cultivation periods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1108-1113
• /
• 2012

The changes of soil organic carbon (SOC) content in paddy soils (sandy loam) were assessed from data of the 59 years fertilization plots in which the continuous rice cropping experiment started in 1954. The treatments were no fertilization(no fert.), NPK fertilization (N, NPK), NPK plus rice straw compost (NPK+C), and NPK plus rice straw compost, silicate fertilizer and lime (NPK+CLS). After 41 years, SOC content in NPK+C and NPK+CLS treatment in surface soils (0~15 cm) reached at the highest, followed by maintaining a plateau level for 8 years. After 51 years, they showed a tendency to decrease. Peak concentrations of soil organic carbon were $20.1g\;kg^{-1}$ in NPK+CLS, $19.1g\;kg^{-1}$ in NPK+C, $13.3g\;kg^{-1}$ in NPK, $11.9g\;kg^{-1}$ in N, and $11.6g\;kg^{-1}$ in control. Dissolved organic carbon(DOC) contents in surface soil solution were about 2.3 times higher in NPK+C than that in NPK+CLS. Therefore, SOC in subsurface soil(15~30 cm) was greater in NPK+C than the other treatments. These results indicate that continuous application of rice straw compost and silicate fertilizer affected significantly on the level of SOC in surface soils, subsurface soils, and soil solutions. Thus, the combined applications of NPK fertilizers with organic compost and silicate as a soil amendment are recommended as the best fertilization practice for soil carbon accumulation, environment conservation, and enhancement of soil fertility status in the continuous rice cropping system.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.365-370
• /
• 2009

For the production of diglyceride (DG) containing medium chain fatty acid, which could be utilized as a substrate to structured lipid production, monoglyceride (MG) and caprylic acid were reacted in the presence of lipase. The reaction system was well mixed homogeneously without using any organic solvent. Among the lipases investigated, Lipozyme RM IM and Novozym 435 were selected on the basis of equilibrium DG yields from the medium chain fatty acid and MG. And reaction conditions such as addition of molecular sieve, water content of immobilized lipase, reaction temperature, and mole ratio of MG/caprylic acid are optimized to increase DG production by using Lipozyme RM IM. DG content of reaction mixture showed 8% increase by adding molecular sieve to reaction mixture. Removal of water from the immobilized lipase could affect seriously equilibrium content of DG. More than 2.8%(w/w) removal of water from the support could make 44% of DG. Optimum temperature was found to $60^{\circ}C$. Temperature shift from $60^{\circ}C$ to $25^{\circ}C$ resulted in increase of free fatty acid (FFA) content. The equilibrium DG yield was not seriously affected by on MG/caprylic acid molar ratio. However, at the stoichiometric ratio of 1:1 the highest DG yield was obtained. Increasing MG/caprylic acid ratio from 0.3 to 1.8 decreased FFA content from 34% to 13%, while MG content increased from 27% to 50%.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.205-211
• /
• 2011

On board comparison of pH and total alkalinity measurement in seawater was carried out during the JES expedition on R/V Roger Revelle in the East Sea using 550 real seawater samples from the surface to the bottom. Spectrophotometry and potentiometry without liquid junction were compared for pH measurement. The pH values of two methods are generally in a good agreement. Spectrophotometry with a pipette provides higher value compare with the potentiometry in the deep layer, where pH values are lower. However, spectrophotometry without a pipette shows same values with potentiometry within their precision range. The pipetting procedure may remove of $CO_2$ in the sample, which causes increase of pH. Potentiometric titration methods using a closed-cell and an open-cell were compared for the total alkalinity measurement. Values from open cell method are smaller by about 5~10 ${\mu}mol\;kg^{-1}$ than those from closed cell method. This may be caused by the bubble formed in the closed cell during the experiment. Although any analytical method compared in this study for the pH or TA measurement can be applied, special attentions should be paid for satisfactory results.

• Journal of Distribution Science
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2017

Purpose - Previous studies related to emotional labor of salespeople have mainly focused on identifying the antecedents of emotional exhaustion and turnover intention and exploring the mitigating effects salespeople's motivation on emotional exhaustion and turnover intention. They also demonstrates that there are different roles for moderating in social support, which means mental/physical support related to the job in supervisors, colleagues and organizations. The purpose of this paper is to investigate how service employees' surface acting affect turnover intention through emotional exhaustion. Another important objective of this paper is to investigate whether perceived social support moderates 1) the relationship between surface acting and emotional exhaustion 2) the relationship between emotional exhaustion and turnover intention. Research design, data, and methodology - To test the hypotheses, we collected the data from Korean insurance company sales employees. A total of 235 responses were received, from which 220 usable responses were obtained after list-wise deletion. Working with a sample of 220 responses, structural equation modeling was employed to empirically test research hypotheses(

The relationship between surface acting and emotion exhaustion,

The relationship between emotion exhaustion and turnover intention,

The moderating effect of perceived social support(PSS) on the relationship between surface acting and emotion exhaustion, and

The moderating effect of perceived social support(PSS) on the relationship between emotion exhaustion and turnover intention. SPSS 22.0 and AMOS software were used in these data analysis. Results - The service employees' surface acting was positively related to the emotional exhaustion; in turn, the service employees' feelings on emotional exhaustion are positively related to turnover intention. In addition, Perceived Social Support significantly moderated the relationship between surface acting and emotional exhaustion. However, perceived social support has a non-significant moderating effect on the path from emotional exhaustion to turnover intention. On the basis of these results, the following conclusion can be drawn. First, distribution service companies will be needed the administrative efforts to offer counseling programs and space to provide their members with enough rest in experiencing psychological pain due to the salespeople's surface acting. Also, it is necessary for distribution service companies to identify and share the examples of successfully solving emotional exhaustion caused by salespeople's surface acting.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.