• Journal of Life Science
• /
• v.18 no.3
• /
• pp.291-297
• /
• 2008

We investigated whether 1) the combined capsaicin (75 mg), sesamin (30 mg), and L-carnitine (900 mg) (CCSC) ingestion enhances autonomic nervous system (ANS) activities including thermogenic sympathetic activity as energy metabolic modulator, 2) ${\beta}_3-AR$ polymorphism of each subject influences with ANS activity. Seven healthy males $(22.0{\pm}0.5\;yr)$ volunteered for this study. The cardiac autonomic nervous activities evaluated by means of heart rate variability of power spectral analysis were continuously measured during 5 min every 30 min for total 120 min resting condition with CCSC or placebo oral administration chosen at random. The results indicated that, there are not $Arp/Arg^{64}$ variants of the ${\beta}_3-AR$ genotypes in our subjects. There were not also significant differences in heart rate during rest between both trials. The difference of ANS activity did not reach the statistical significance between both trials. However, the significant improvement showed TOTAL power, HF component, and the indices of SNS and PNS activities before and at 30 min after CCSC ingestion (p<0.05, respectively). In conclusions, although each component of combined CCSC is associated with lipolysis and/or fat oxidation, the combined CCSC consumption is not influenced in stimulation of thermogenic sympathetic activity as modulator of energy metabolism. In rather, our results suggested that CCSC ingestion improves the balance of both SNS and PNS activities. Therefore, it will be considered many combined nutrient components for ergogenic and/or lipolysis effects as well as genetic variants affecting ANS activity in further studies.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.7
• /
• pp.473-479
• /
• 2012

Water reuse has been highlighted as a representative alternative to solve the lacking water resource. This study carried out a study on the pipe corrosion and water quality change which can occur through the supply of reclaimed water, using a simulated reclaimed water distribution pipeline. Galvanized steel pipe (GSP), cast iron pipe (CIP), stainless steel pipe (STSP) and PVC pipe (PVCP) were used for the pipe materials. Reclaimed water(RW) and tap water(TW) were respectively supplied into simulated reclaimed water distribution pipelines. As a result of performing a loop test to supply reclaimed water to simulated reclaimed water distribution pipelines, the weight reduction of pipe coupons showed the sequence of CIP > GSP > STSP ${\approx}$ PVCP. In addition, reclaimed water showed a high corrosion rate comparing to that of tap water. In case of CIP, the initial corrosion rate showed 3.511 mdd(milligrams per square decimeter per day) for reclaimed water and 2.064 mdd for tap water and the corrosion rate for 90 days showed 0.833 mdd for reclaimed water and 0.294 mdd for tap water. Also in case of GSP, the initial corrosion rate showed 2.703 mdd for reclaimed water and 2.499 mdd for tap water and the corrosion rate for 90 days showed 0.349 mdd for reclaimed water and 0.248 mdd for tap water, which was a tendency similar to that appeared in CIP with a tendency to reduce the corrosion rate. As a result of water quality changes of reclaimed water at pipe materials to carry out the loop test, there was higher conversion ratio of ammonia into nitrate in CIP and GSP with higher corrosion rate than that in STSP and PVCP where no corrosion has occurred. The highest denitrification rate of nitrate could be observed from CIP with the most particles generated from corrosion. In CIP, it could be confirmed that there was MIC (Microbiologically Induced Corrosion) as a result of EDS (Energy Dispersive X-ray spectrometer System) analysis results.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.185-193
• /
• 2015

Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.3
• /
• pp.207-214
• /
• 2016

The aim of this study was to evaluate Influence on intra-limb coordination in individuals wearing knee brace during walking. Seven healthy male adults ($32.3{\pm}2.7$ years old, $175.2{\pm}3.8cm$, $76.2{\pm}8.7kg$) participated. They wore knee brace or didn't wear any knee brace and were asked to walk along a 10 m long walkway. Spatiotemporal parameters, angles of the lower limbs, and intra-limb continuous relative phase (CRP) were measured and calculated. No differences of spatiotemporal parameters were shown (all p > 0.05). There were no changes in the angle and its range of motion (ROM) in the hip for the subjects as wearing knee brace, while ROM ($65.5{\pm}3.7^{\circ}$ vs. $60.5{\pm}3.5^{\circ}$, p < 0.05) of the angle and maximum flexion angles (stance: $31.9{\pm}4.6$ vs. $25.6{\pm}5.5$, swing: $76.7{\pm}3.1$ vs. $68.9{\pm}3.4$, all p < 0.05) in the knee significantly decreased. No changes in ROM of angle in the ankle were shown, whereas maximum dorsiflexion decreased ($22.4{\pm}2.6$ vs. $19.2{\pm}2.1$, p < 0.05) and maximum plantarflexion increased ($9.5{\pm}3.0$ vs. $15.7{\pm}2.2$, p<0.05). There were no changes in most of CRP between joints. CRP between the hip and knee joints decreased ($93.0{\pm}7.8$ vs, $84.7{\pm}4.9$, p < 0.05). Most of CRP standard deviation increased (between the hip and ankle joint during swing: $25.1{\pm}6.7$ vs. $32.4{\pm}1.9$, between the knee and ankle joint during stance: $46.0{\pm}12.9$ vs. $80.1{\pm}31.1$, between the knee and ankle joint during swing: $34.5{\pm}4.1$ vs. $37.6{\pm}3.1$, all p < 0.05). These results indicated that wearing knee brace affected joint angle and intra-limb coordination, but less affected gait features.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.761-769
• /
• 2014

Ultra high performance concrete (UHPC) has been developed to overcome the low strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• The Korean Journal of Ecology
• /
• v.27 no.6 s.122
• /
• pp.325-333
• /
• 2004

Birds were censused to investigate the composition of landscape structure for bird diversity around Ulsan between May and November 2002. Associations with three main categories of habitat variables were evaluated: 1) amount and type of forest; 2) residual habitats not classified as forest or crops; 3) land-use variables. Cluster analysis of bird community shows the highest forest variables of $79.06\%$, and the others are residual habitat variables ($17.98\%$), land-use variables ($2.94\%$) in spring, and forest variables of $57.77\%$, land-use variables ($23.16\%$), residual habitat variables ($18.47\%$) in autumn, respectively. In Principal Component Analysis of a total of 196 sites, the populations are strongly correlated to Component I ($54.8\%$) based forest habitats and to Component II based on land-use. Species preferring sites were clearly separated with heterogenous forest along the first axis. In autumn, the populations are moderately correlated to Component I based land-use and to component II based forest habitats. Species preferring local habitats were also clearly separated. Fifty three species of 1,700 birds were recorded: Brown-eared Bulbul, Vinous-throated Parrotbill, Great Tit, Tree Sparrow and Black-billed Magpie accounted for over $60\%$ of the observed birds in spring and autumn. The important species were Brown-eared Bulbul, Vinous-throated Parrotbill, Great Tit and Tree Sparrow in spring and autumn. Four habitats in terms of their species richness were computed as follows: Wonhyosan has the highest an expected species number, $E[S_{59}]=19$. Moonsusan has the lowest expected species number, $E[S_{59}]=17$ in spring. In autumn, Kuenamsan has the highest expected species number, $E[S_{63}]=16$. Moonsusan has the lowest expected species number, $E[S_{63}]=12$. Pairwise similarity declined with increasing distance between recording site and recording site from Moonsusan-Wonhyosan (0.62), the same geographical regions clustered separately in a UPGMA cluster tree in spring, and in autumn from Moonsusan-ChungJoksan (0.53).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.18-29
• /
• 2010

Offshore subsurface storage of $CO_2$ is regarded as one of the most promising options to response severe climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the offshore subsurface geological structure such as the depleted gas reservoir and deep sea saline aquifer. Since 2005, we have developed relevant technologies for marine geological storage of $CO_2$. Those technologies include possible storage site surveys and basic designs for $CO_2$ transport and storage processes. To design a reliable $CO_2$ marine geological storage system, we devised a hypothetical scenario and used a numerical simulation tool to study its detailed processes. The process of transport $CO_2$ from the onshore capture sites to the offshore storage sites can be simulated with a thermodynamic equation of state. Before going to main calculation of process design, we compared and analyzed the relevant equation of states. To evaluate the predictive accuracies of the examined equation of states, we compare the results of numerical calculations with experimental reference data. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_{2}O$, $SO_{\chi}$, $H_{2}S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. This paper analyzes the major design parameters that are useful for constructing onshore and offshore $CO_2$ transport systems. On the basis of a parametric study of the hypothetical scenario, we suggest relevant variation ranges for the design parameters, particularly the flow rate, diameter, temperature, and pressure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.594-600
• /
• 2009

Quality characteristics of white lotus leaf tea (LLT) fermented with or without mycelial Paecilomyces japonica were investigated. Extraction yield and browning index of hot water extract from non fermented and fermented LLTs were higher than those of ethanol extract (p<0.05). In all LLTs, nutritional components such as total free sugar, free amino acids and minerals of hot water extracts were higher than those of ethanol extracts except for total organic acids (p<0.05). Contents of total free sugar and organic acids were markedly increased through fermentation process of mycelial Paecilomyces japonica. in the same solvent extracts (p<0.05). Contents of most taste components of fermented LLT were increased by mycelial solid fermentation (p<0.05), but total free amino acids of two extracts were decreased in the range of $37.1{\sim}67.2%$ as compared to non-fermented LLT. Fifty-nine volatile compounds were identified by GC and GC-MS, including 11 aldehydes, 14 alcohols, 11 ketones, 11 hydrocarbones and 12 acids. Aldehyde and ketone compounds were more identified in fermented LLT than in non-fermented LLT being abundant alcohol compounds by simultaneous steam distillation and extraction. The most abundant compounds of LLT identified in this study were curcumene followed by 2,6-bis(1,1-dimethylethyl)-4-methyl-phenol and cyclohexen. Main compounds of fermented LLT were 2,6-bis(1,1-dimethylethyl)-4-methyl-phenol, butanoic acid, furfural, benzaldehyde, hexanoic acid and 2(3H)-furanone.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.835-840
• /
• 2006

The purpose of this study was to examine the in vitro effects of body and visceral portion of Haliotis discus hannai on angiotensin converting enzyme (ACE) activity and antioxidant and anticoagulant capacity. Extracts from both abalone body and visceral portion using 80% ethanol showed a high ACE-inhibitory effect. While ACE-inhibitory effect of extracts of the body part was dose-dependent, visceral extracts did not show any difference by the level of concentration. ACE-inhibitory effect of the visceral portion was much higher than that of the body. Antioxidant capacity was increased with increasing concentration of 80% ethanol body extracts although the capacity was low. The 80% ethanol visceral extracts showed a similar level of antioxidant capacity to the body extract in low concentration. Water extracts showed a dose-dependent increase in the activity. There was no significant difference in the antioxidant activity between the body and the visceral part. Anticoagulant capacity of 80% ethanol extracts, which was measured using prothrombin time(PT), was higher in the body part than the visceral part. Water extracts of Haliotis discus showed no any significant effect on anticoagulant capacity. The in vitro effects were also examined after Haliotis discus was refrigerated for 48 hours. Higher ACE-inhibitory effect was observed for the visceral portion than the body, in particular, before the sample was refrigerated. Antioxidant effect of Haliotis discus increased with increasing level of the sample before it was refrigerated. However, there was a significant difference between the body and the visceral part, which showed significantly higher capacity. There was no significant difference between the body and visceral part in PT regardless of refrigeration. While activated partial thromboplastin time (APTT) showed no significant difference between body and visceral part, there was a significant difference in the capacity between before and after the refrigeration, which showed much lower coagulant capacity.