• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.433-436
• /
• 2010

본 논문에서는 파일형 선박충돌 방호공에 선박이 충돌하였을 때 방호공의 거동을 해석하였다. 방호공의 구조는 상부슬래브, RCP 말뚝 및 이를 지지하는 지반은 비선형 지반스프링으로 모델링 하였다. 상부슬래브 8절점요소로 모델링 하였으며 철근과 콘크리트로 구성되어있다. RCP 말뚝은 철근망과 충진콘크리트로 구성되어있으며 충돌 시 파괴거동을 표현할 수 있는 Damaged Plasticity로 모델을 사용하였고 Shell 요소로 모델링 하였다. 선박충돌 시 선박의 강성에 따른 거동 특성을 파악하기 위해 선박을 강체모델과 실제모델에 대한 해석을 수행하였다. 선박과 교량의 충돌은 정면충돌로 고려하였으며, 충돌속도는 3.3m/sec로 가정하였다. 선박과 방호공과의 충돌 해석은 비선형 해석 프로그램인 ABAQUS/Explicit을 이용하여 수행하였으며, 이를 통하여 선박 충돌 시 방호공의 에너지 거동을 분석하였다. 해석결과 선박의 강성이 커질수록 슬래브의 변형 및 소산 에너지량이 커지는 것을 확인할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.357-367
• /
• 2017

Bending and axial forces simultaneously occur at the cross-section of a shotcrete lining reinforced with steel supports due to the tunnel geometry. The shotcrete has changing flexural stiffness depending on the axial forces and, as a result, severely nonlinear behavior. The mechanical properties of a shotcrete-steel composite also depend on the type of steel support. This study presents a fiber section element model considering the effect of axial force to evaluate the nonlinear behavior of a shotcrete-steel composite. Additionally, the model was used to analyze the effects of different types of steel supports on the load capacity. Furthermore, a modified hyperbolic model for ground reaction, including strain-softening, is proposed to account for the ground-lining interaction. The model was validated by comparing the numerical results with results from previous load test performed on arched shotcrete specimens. The changes in mechanical responses of the lining were also investigated. Results show a lining with doubly reinforcement rebar has similar load capacity as a lining with H-shaped supports. The use of more materials for the steel support enhances the residual resistance. For all types of steel reinforcement, the contribution of steel supports during peak load decreases as the ground becomes stiffer.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.480-488
• /
• 2016

For the development of areas around railway lines, subsurface construction using the non-open cut method under the railway has recently been increased. However, when a structure under a railway is constructed, the stress release of the ground is not considered an important factor in the design. In this study, laboratory tests were conducted to determine a zone of stress relaxation. Field tests using an inclinometer were performed to measure the horizontal displacement of the ground during non-open cut construction. The stress release zone and the subgrade stiffness were investigated by numerical analysis. The results of the laboratory tests indicated that the failure zone in the ground was similar to a Rankine's active earth pressure zone. The measured data from the inclinometer in the field tests showed that displacements started when a steel pipe was pushed into the ground. The results of numerical analysis show that lateral earth pressure was also close to Rankine's active earth pressure. The roadbed support stiffness of the soil around the structure decreased to 40% of the original value. The ground around the subsurface structure constructed using nonopen cut methods should be reinforced to maintain the running stability of train.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.77-85
• /
• 2014

This study set out to predict the load capacity and rotordynamic coefficients of tilting-pad journal bearings, taking the pivot stiffness into account. The analysis uses rocker-back (cylindrical) and ball in socket (spherical) pivot models, both of which are based on Hertzian contact stress theory. The models ascertain the non-linear elastic deformation of the pivots according to the applied load, pivot geometry, and material properties. At present, the Reynolds equation for an isothermal, isoviscous, and incompressible fluid is used to calculate the film pressure by using the finite-element method, after which the Newton-Raphson method is used to simultaneously find the journal center location, pad angles, and pivot deflections. The bearing analysis, excluding the pivot models, is validated using predictions those are readily available in the literature. As the rotor speed increases, the predicted journal eccentricity and damping coefficients decrease, but the stiffness coefficients increase, as expected. Most importantly, the implementation of the pivot models increases the journal eccentricity but significantly decreases the stiffness and damping coefficients of the tilting-pad journal bearings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.805-808
• /
• 2005

This paper is a study on an optical bench satisfying stiffness and thermal pointing error requirements for LEO earth observation satellite. According to shape and stiffness requirements, optical bench type 1 is designed. Because type 1 does not satisfy the thermal pointing error requirement, an optical bench type 2 is suggested. Although the type 2 has better results than type 1, it still does not meet the thermal pointing error requirement. Using the results of optical bench type 1&2, the optical bench type 3 is finally designed, which satisfies both the stiffness and thermal pointing error requirements.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.264-272
• /
• 1994

동력을 발생하거나 이를 이용하는 대부분의 기계장치는 회전하는 축계 장치 를 갖고 있는데 이들은 중량을 갖는 회전체와 이것을 지지하거나 연결하는 강성축과 베어링으로 구성되므로 진동형태에 따른 고유진동수를 나타낸다. 그 결과 축계 장치 가 운전되는 동안 발생하는 기진력이 축계 강도를 초과하거나 진동수가 시스템의 공진점에 일치하던지 가까우면 이들 진동에 의해 축계 장치에 부착되어 있는 카프링, 감속기어, 지지베어링, 밀봉씰, 공정볼트 등이 이상마모 또는 피로파괴의 원인이 되므로 설계시나 운전중에 이에 대한 진동원인들을 PC를 이용하여 현장운전자들이 쉽게 규명할 수 있도록 개발하고 발생되는 진동문제를 효과적으로 해결할 수 있는 진동 저감장치를 몇 가지 소걔하였다. 국내에서 제작되는 선박, 자동차, 발전프랜트 또는 여기에 설치되는 엔진의 진동저감울 위해 이들 소프트웨어와 하드웨어들은 국내 관련기업의 현장기술 지도를 위해 여러차례 활용된 바 있으며 이를 이용하므로 써 축계진동 저감기술 자립은 물론 국산화 제품의 성능향상에도 크게 기여할 수 있다고 본다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2011

This paper is to investigate the effects of the asymmetrical support stiffness on the stability of a supercritical driveshaft with asymmetrical shaft stiffness and anisotropic bearings. The equations of motion is derived for a system including a rigid disk, a massless flexible asymmetric shaft, anisotropic bearings and a support beam. The Floquet theory is applied to perform the stability analysis with the variation of the support stiffness, the shaft asymmetry, the shaft damping and the shaft speed. The results show that the asymmetric support stiffness is closely related to the stability caused by primary resonance as well as the supercritical operation. First, the stiffness variation can stabilize the system around primary resonance by weakening the parametric resonance from the shaft asymmetry. Second, it also improve the stability characteristics at a supercritical operation when the support stiffness is not so high relative to the shaft stiffness.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.514-520
• /
• 2015

The effects of suspension stiffness on the reaction load of the gearbox suspension for a three-point suspension wind turbine drive train were investigated by finite element analysis. The reaction forces of the gearbox suspension appear to increase as the gearbox suspension stiffness increases; however, the main bearing stiffness has a reverse effect on the reaction forces. The influence of the gearbox suspension stiffness is greater than that of the main bearing. Since the suspensions must provide the gearbox with proper support, it is not practical to use soft gearbox suspension for small reaction forces. It is more feasible to use stiff main bearings. As a guideline for the main bearing stiffness in the present study, we propose a relative stiffness of 100-150% of the reference.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.32-38
• /
• 2006

During stereolithography processes, the shape errors such as curl distortion and distortion of side face are generated due to the shrinkage of liquid resins. In this study, the effects of dimension of part and structure of supports on the shape error are examined. Cubic specimens which have different thicknesses are manufactured and their deformations are measured with CMM. Thicker part generates smaller curl distortion of top face and larger of bottom face. Also thicker part generates larger distortion of side face until part thickness increases to about 20mm. Larger stiffness of supports which is obtained by shorter spacing of the supports and line type contact instead of point type contact generates smaller shape error of the part.