• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.392-401
• /
• 2022

This study investigated the effects of silver diamine fluoride (SDF) and potassium iodide (KI) treatments on the acid resistance of dentin exposed to secondary caries. Sixteen bovine dentin specimens with artificially induced caries were assigned to the following four groups: untreated negative control, untreated positive control, SDF-treated (SDF), and SDF and KI-treated (SDFKI). Multispecies cariogenic biofilms containing Streptococcus mutans, Lactobacillus casei, and Candida albicans were cultured on the specimens for 28 days, except for the negative control group. Specimens from the negative control group were stored in phosphate-buffered saline for that period. After a cariogenic biofilm challenge, the degree of demineralization was evaluated using micro-computed tomography (micro-CT). As a result of data analysis using micro-CT, the demineralization depths of the negative control, positive control, SDF, and SDFKI groups were 149.0 ± 7 ㎛, 392.0 ± 11 ㎛, 206.0 ± 20 ㎛, and 230.0 ± 31 ㎛, respectively. The degree of demineralization was significantly reduced in the SDF and SDFKI groups compared with that in the untreated positive control group. There were no significant differences between the SDF and SDFKI groups. This study confirmed that SDF and SDFKI treatments increase the acid resistance of dentin to secondary caries. KI did not significantly affect the caries-arresting effect of the SDF.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.9-18
• /
• 2022

In vitro studies are essential to predict the clinical performance of ceramic widely used as restorative materials. Traditional experiments such as fracture toughness and flexural strength have been used to evaluate the properties of brittle ceramics. However, these experiments have a limitation that the load conditions, failure patterns, and load values at which failure occurs are not similar to human occlusal force ranges or clinical failures. On the other hand, the edge chipping test (ECT), which was recently introduced to study chipping fracture of ceramics, has similar failure patterns to clinical trials. In addition, the failure loads from ECT were similar to human occlusal force. ECT can be usefully used in the study of ceramic properties. In this literature review, a more clinically meaningful experimental study of ceramics by examining the meaning and limitations of traditional ceramic failure tests and comparing them with ECT.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.127-137
• /
• 2022

Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.3
• /
• pp.13-26
• /
• 2021

In mountain gully, channelized debris flow is an important phenomenon in the process of topographical change. Social infrastructure as roads may be damaged by channelized debris flows, but there has been little information about their occurrence and movement to prepare for the risk of the debris flow. Most of the channelized debris flows occur during heavy rains in mountainous valleys that are difficult to access, so there are not many field data. In this study, the topographical characteristics of the catchment, the rainfall and runoff related to the debris flow, the sedimentary pattern and the cross-sectional change of the channel bed, and the underflow velocity of the gravel bed have been investigated and analyzed in the Singi gully where the channelized debris flows occurred. In the catchment, there was almost no sediment runoff because the vegetation combine with the debris landforms and covered the surface. Therefore, the obvious cause of the channelized debris flows is the collapse of the slope and bed of the gully. Even if the gravel, cobbles, and boulders of the channel bed were lost by debris flow, the thalweg change due to debris flow may not be significant because they are supplied from the gully side slope normally. After the gabion structures were installed, the debris flow increased the thalweg change, bed erosion and side slope of the gully. Various sedimentary structures in the gully were classified according to the factors supporting the sedimentation. The hypsometric curve of the gully reflects the debris landforms and vegetation characteristics of the watershed and the sediment runoff due to debris flow, etc. The relationship between the flow velocity and the hydraulic gradient was non-linear under the condition that the porous medium with gully bed gravels is saturated with water. These results may be used as basic data for channelized debris flow research.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.68-68
• /
• 2020

최근 농촌진흥청과 기상청에서 발표한 연구자료에 따르면 2020년 기준으로 국내 경지면적의 10% 가량이 이미 아열대 기후대에 속하고 있을 뿐 현재 추세대로 온실가스가 배출될 경우 2100년경 우리나라의 대부분 지역은 아열대 기후대에 속하게 될 것으로 전망되고 있다. 이에 국가 기관뿐만 아니라 많은 지자체에서 기후변화에 대응하여 아열대 작물을 도입하기 위한 시도를 활발하게 추진하고 있다. 아열대 작물 중 국내에서 3번째로 많이 활용되고 있는 삼채는 기능성 물질을 다량으로 함유하고 있어 수요도가 지속적으로 증가하고 있다. 하지만, 삼채의 경우 일반적인 원예 작물과는 달리 실생 종자를 상업적으로 이용하고 있어 종자들의 발아율이 균일하지 못할 뿐만 아니라 발아율이 낮은 문제가 있는 것으로 보고되고 있다. 이에 삼채의 경우 농가에서 정식 시기를 맞추기 어려울 뿐만 아니라 대규모 생산을 위한 공정육묘 시스템의 적용이 어려운 상황에 있다. 종자 프라이밍 기술은 잠재적으로 종자 발아와 식물 생장을 빠르고 균일하게 해줄 수 있는 방법으로 알려져 있지만, 현재 삼채에서는 프라이밍 처리가 종자 발아에 미치는 영향에 대해서 검토한 사례가 없다. 따라서 본 연구는 삼채의 파종 효율을 증진시키기 위한 목적으로 몇 가지 프라이밍 처리 방법이 삼채의 발아특성에 미치는 영향을 검정하고자 하였다. 삼채 종자는 (주)아람종묘사의 종자를 구매하여 강릉원주대학교 생명과학대학에서 수행하였다. 프라이밍 처리는 Hydropriming은 증류수, Osmopriming은 CaCl2 1.0%, Halopriming은 Polyrthylene glycol 6000(PEG) 13.5%의 3가지를 사용하였으며, 각 프라이밍 처리 시간은 6시간, 12시간, 18시간, 24시간, 48시간 총 5가지 방법으로 처리되어 대조구를 포함 총 16개의 처리를 하였다. 프라이밍 처리 된 종자는 페트리디쉬 (50mm)에 30립씩 치상하였다. 프라이밍 각 처리구별 4반복으로 하였으며 24시간 암(Black), 온도 20℃의 조직배양실에서 치상 후 10일간 조사하였다. 본 실험 결과 대조구는 38% 발아율을 가졌으며, 프라이밍 처리 시간에 따른 각 처리구들은 대조구에 비해 발아율이 높아짐을 확인할 수 있었다. 그 중 Hydropriming 12시간 발아율 51%, Osmopriming 18시간 발아율 68%, Halopriming 48시간 발아율 65%로 각 프라이밍 처리구별 가장 좋은 발아율을 확인할 수 있었다. 결론적으로 삼채에서 프라이밍 처리 기술의 적용은 발아율의 향상과 발아기간의 정형화를 유도할 수 있어 농가에서의 일반 육묘는 물론이고 대규모 공정육묘를 위한 저렴하고 안전한 방법 중 하나로써 이용될 수 있을 것으로 기대되어 진다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.69-69
• /
• 2020

식물체가 건조 스트레스를 받으면 각 기관 물질 생산의 변이, 분화 및 발달 억제를 통해서 식물의 생산활동을 현저히 저하시켜, 식물의 생장, 형태, 개체발생 및 대사생리에 영향을 미치는 것으로 연구되어 왔다. 최근 기후 온난화로 인해 온도가 점진적으로 상승하고 가뭄과 같은 이상기상이 빈번하게 발생함에 따라 많은 노지 작물의 농업 생산성이 약화되고 있다. 배추는 우리나라의 대표적인 식품 중 하나인 김치의 주재료로 연중 안정적인 생산과 공급이 필요시 되지만, 배추의 경우 건조 조건에서 엽육조직의 붕괴와 같은 생리장해가 발생되기 때문에 최근 발생되고 있는 이상 기후의 영향으로 안정적인 생산이 어려워지고 있는 실정이다. 하지만, 배추에서는 이상 기후에 대응이 가능한 내건성 품종의 육성을 위한 연구는 미흡한 실정이다. 따라서 본 연구에서는 내건성이 높은 배추 개발을 위한 기초소재를 찾는 것을 목적으로 농촌진흥청 유전자원센터에서 보존하고 있는 재래종 배추 30계통을 분양받아 강릉원주대학교 생명과학대학 내의 조직배양실을 이용하여 연구를 수행하였다. 배지는 Tissue Culture Square Dish(125×125×20mm)에 Agar를 녹여 40ml씩 분주하여 고체배지를 조성한 후, 건조 처리구 Polyrthylene glycol 6000(PEG) 0%(Control), 20%(Mild Stress), 30%(Severe Stress)를 설정하여 60ml씩 추가 분주하여 배양기 28℃에서 15시간 처리를 하였다. 분양받은 각 계통의 종자는 1% 차아염소산 나트륨으로 10분간 종자표면을 살균한 후, 5번 정도 멸균수로 헹군 후, 표면 살균한 재래종 종자를 고체배지 시험관에 6립씩 치상하였다. 식물체 생육은 각 처리구별 3반복으로 하였으며 주간 12시간 주기, 광도 2,400Lux, 온도 20℃의 조직배양실에서 치상 후 7일간 생육하였다. 치상 후 7일간 생육시킨 식물체를 채취하여 지상부생체중, 지하부 생체중, 뿌리 길이를 측정하였으며, 지상부와 지하부로 나누어 50℃에서 72시간 건조시킨 후, 건물 생산량을 조사하였다. 본 실험 결과 건조 처리(PEG-6000)는 배추의 생장을 저해하였지만, 생육 저해 정도는 계통간의 차이가 있는 것을 관찰할 수 있었으며 무처리구와 스트레스 처리구간의 생장량 변화 정도를 기반으로 군집분석을 수행한 결과 'IT110483'과 'IT104903' 계통이 실험에 공시된 계통들 중 상대적으로 강한 건조 내성을 가진 것을 확인할 수 있었다. 따라서, 재래종 배추 계통 중 일부는 건조내성이 강한 새로운 배추 품종을 육성하는데 있어 유용하게 이용될 수 있을 것으로 사료된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.54-63
• /
• 2024

The long-term use of an implant overdenture shows problems, such as wear of attachment, concentrated occlusal forces on the anterior teeth, fracture of artificial teeth and rotation of denture. By transitioning to an Implant-assisted removable partial denture (IARPD) using additional implant placement, the problems can be solved. In this case report, a transition was made from implant overdenture to IARPD utilizing surveyed crowns to distribute occlusal forces concentrated on anterior teeth and to prevent denture rotation in a skeletal Class III patient. Design of definitive prosthesis with appropriate function and aesthetics was determined through several stages of provisional restorations. In this case, appropriate posterior occlusion and maintenance of peri-implant bone level of definitive prosthesis were observed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.276-284
• /
• 2023

After tooth extraction, alveolar bone is resorbed over time. Loss of alveolar bone and reduction of upper soft tissue poses difficulties in future implant placement and long-term survival of the implant. This case report focuses on increasing the soft and hard tissues at the implant placement site by using alveolar ridge augmentation and a xenogeneic collagen matrix as a soft tissue substitute in an extraction socket affected by periodontal disease. In each case, the width of the alveolar bone increased to 6 mm, 8 mm, and 4 mm, and regeneration of the interdental papilla around the implant was shown, as well as buccal keratinized gingiva of 4 mm, 6 mm, and 4 mm, respectively. Enlarged alveolar bone facilitates implant surgery, and interdental papillae and keratinized gingiva enable aesthetic prosthesis. This study performed alveolar ridge augmentation on patients with extraction sockets affected by periodontal disease and additionally used soft tissue substitutes to provide a better environment for implant placement and have positive effects for aesthetic and predictive implant surgery.

• Journal of Forest and Environmental Science
• /
• v.24 no.1
• /
• pp.41-46
• /
• 2008

Progeny tests of Abies holophylla were established with 32 open-pollinated families at Hwaseong and Gangneung in 1994. Growth characteristics (height, DBH and volume index) were measured at the age of 15, showing that Gangneung site showed in general better performance than Hwaseong site. Analysis of variance (ANOVA) of the growth characteristics showed that there was a significant difference among families in Gangneung but not in Hwaseong, and Hwaseong site showed that DBH and volume index were statistically different among replications. At Gangneung site, family ${\times}$ replication interaction was significant in DBH and volume index. Based on the combined analysis of both sites, all characteristics except height showed highly significant differences between sites and among families. On the other hand, family ${\times}$ replication interaction was not significant, implying that growth pattern of families could be similar at Gangneung and Hwaseong. Individual heritabilities ($hi^2$) at Gangneung were 0.485 in height, 0.611 in DBH and 0.538 in volume index, and the values of $hi^2$ at Hwaseong were 0.121 in height, 0.054 in DBH and 0.080 in volume index, respectively. Based on both sites, $hi^2$ was estimated as 0.204 in height, 0.326 in DBH and 0.238 in volume index. Individual heritabilities (0.054~0.611) were lower than family heritabilities (0.089~0.723) for all growth characteristics. Realized gain was estimated to be 2.5% in height, 9.2% in DBH and 23.6% in volume. When inferior families (about 50% of all families) are genetically thinned from a seed orchard, genetic gain would be 9.55% in height, 17.0% in DBH and 46.8% in volume.

• Journal of Korea Water Resources Association
• /
• v.57 no.6
• /
• pp.421-435
• /
• 2024

In April 2023, a wildfire broke out in Gangneung located in the east coast region due to the influence of the Yanggang-local wind. In this study, GIS-based RUSLE(Revised Universal Soil Loss Equation) and SEMMA (Soil Erosion Model for Mountain Areas) were used to evaluate the erosion rate due to vegetation recovery in a small watershed of the Gangneung WUI(Wildland-Urban Interface) fire. The small watershed of WUI fire has a low altitude range of 10-30 m and the average slope of 10.0±7.4° which corresponds to a gentle slope. The soil texture was loamy sand with a high organic content and the deep soil depth. As herbaceous layer regenerated profusely in the gully after the wildfire, the NDVI (Normalized Difference Vegetation Index) reached a maximum of 0.55. Simulation results of erosion rates showed that RUSLE ranged from 0.07-94.9 t/ha/storm and SEMMA ranged from 0.24-83.6 t/ha/storm. RUSLE overestimated the average erosion rate by 1.19-1.48 times compared to SEMMA. The erosion rates were estimated to be high in the middle slope where burned pine trees were widely distributed and the slope was steep and to be relatively low in the hollow below the gully where herbaceous layer recovers rapidly. SEMMA showed a rapid increase in erosion sensitivity under at certain vegetation covers with NDVI below 0.25 (Ic = 0.35) on post-fire hillslopes. Gentle slopes with high organic content and rapid recovery of natural vegetation had relatively low erosion rate compared to steep slopes. As subsequent infrastructure and human damages due to sediment disaster by heavy rain is anticipated in WUI fire areas, the research results may be used as basic data for targeted management and decision making on the implementation of emergency treatment after the wildfire.