폐 PET 병을 재활용하여 경량콘크리트용 잔골재로 활용하기 위하여 폐 PET 병 활용 경량골재(WPLA)의 품질 및 WPLA를 사용한 콘크리트(WPLAC)의 유동성, 단위용적 중량, 공기량 및 강도특성에 대하여 검토하였다. WPLA의 품질을 검토한 결과 WPLA를 $50\%$ 이하로 치환하는 것이 바람직하며, WPLA를 $50\%$ 치환한 경우 잔골재의 비중 및 흡수율이 강모래보다 각각 23 및 $75\%$ 정도 크게 감소하였으며, 콘크리트의 제물성에 크게 영향을 미쳤다. nU를 치환한 굳지 않은 콘크리트의 워커빌리티는 WPLA 치환율 및 물-시멘트비가 클수록 향상되었으며, 잔골재의 비중이 2.6에서 1.7로 감소함에 따라 콘크리트의 슬럼프 증가율은 약 $45 {\~} 120\%$로 나타났다. WPLA를 $75\%$치환한 콘크리트의 단위용적중량은 보통 콘크리트 보다 약 $17\%$ 정도 감소하였다. WPLA를 25 및 $50\%$ 치환한 콘크리트의 재령 28일 압축강도는 물-시멘트비 변화(W/E=B5 49 및 $53\%$)에 관계없이 30MPa를 상회하였으며, WPLA $25\%$ 치환 콘크리트의 비강도는 물-시멘트비 $49\%$에서 $15.11{\times}10^3 MPa{\cdot}m^3/kg$로 보통콘크리트보다 크게 나타났다. 재령 조일 압축강도, 인장강도 및 탄성계수와의 비는 일반 경량콘크리트와 비슷한 경향을 보였다. 이상의 결과로 WPLA를 경량 콘크리트용 잔골재로 활용하는 것이 가능하다고 판단된다.
PHC말뚝의 선단부를 개방시켜서 사용하면 관입저항력의 감소로 인하여 관입깊이가 증가되며, 결과적으로 지지력의 증가를 가져온다. 그러나 개단 PHC말뚝의 사용을 위해서는 다음의 두가지 문제가 해결되어야 한다. 첫째는 말뚝의 선단부를 개방시킴에 따른 지지력의 변화이며, 둘째는 말뚝 내부로 유입되는 관내토에 의한 말뚝 선단부의 파괴여부이다. 따라서 본 연구에서는 개단 PHC말뚝의 실용성을 검토하기 위하여 먼저 말뚝의 선단부 형상에 따른 지지력 비교를 목적으로 두개의 폐단말뚝과 두 개의 개단말뚝을 이용하여 토조에서 모형말뚝실험을 수행하였다. 실험결과로부터 말뚝의 선단부 형상에 따른 관입저항력과 지지력의 변화 및 PHC말뚝 선단부의 파괴여부가 검토되었다. 실험결과 동일한 관입깊이에서 개단말뚝의 전체지지력은 관입깊이가 증가함에 따라 폐단말뚝의 전체지지력과 비슷해지며, PHC 말뚝의 경우 말뚝선단부로부터 말뚝내경의 0.8~1.1배되는 영역에서 균열발생의 가능성이 제시되었다.
In the previous experiment, it was found that OCC pre-treatment with Hobart mixer at 20-25% consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, com-pared to the no pre-treated, when the same refining time was applied. WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.
This study is a continuation of the previous experimental analysis and is mostly focused on handsheet strength properties. Four completely different fibers, which were Hw-BKP, SW-BKP, White ledger, and OCC, were selected to investigate the effect of mechanical pre-treatment by Hobart mixer on handsheet strehgth properties. After equal time mechanical pre-treatment, the fibers were refined with laboratory valley beater for 10, 20 and 30 minutes, and handsheets were prepared from the fibers for physical strength comparison. Handsheets from SW-BKP and OCC showed 5-30% increase of breaking length, burst index, tear index, and compression index while handsheets from HW-BKP and White ledger no increase except tear index. In Hobart mixer pre-treatment, HW-BKP and White ledger fibers were easily attached to the wall of the mixer bowl and mechanical action was not effectively applied. The fiber length of Hw-BKP and White ledger were 0.837 mm and 1.591 mm, respectively, while SW-BKP and OCC were 2.744 mm and 2.033 mm, respectively, in weight weighted length. The effective mechanical pre-treatment seems to be related to the fiber length. Tear indexes of the pre-treated furnish were much higher than no pre-treatment at the same breaking length level.
라이너지는 대부분의 원료물질을 고지로부터 얻고 있는 친환경적 상품이 다. 그러나 고지를 원료로 사용함에 따라 많은 문제가 발생하게 된다. 그중 원료와 함께 유입되는 다양한 종류의 오염물질로 인하여 기인되는 스틱키는 강도를 저하시킬 뿐 아니라 얼룩 및 반점을 형성하여 제품의 질을 떨어뜨리 고, 또한 설비를 오염시켜 수명 단축 및 세척에 의한 조업중단 등 생산성 저 하를 가져온다. 이러한 문제는 초지기의 대형화와 고속화, 용수조건의 악화 및 고지 재활용율 증가 등의 이유로 더욱 커지고 있다. 본 논문에서는 라이너지 생산공정의 가운데 지료조성공정의 매크로 스틱 키 정량분석을 통하여 전반적인 분포를 조사하였다. 그 결과 매크로 스틱키 는 스크린과 클리너를 통해 다량 제거되고, 공정상의 기계적 에너지에 의해 더욱 미분화되어 제어가 어려운 마이크로 스틱키로 진행되고 있음을 확인하 였다. 또 지료 분급을 위하여 설치된 플로테이션 설비는 기존의 정선설비인 스크린과 클리너에서 제거되기 어려운 마이크로 스틱키를 제거할 수 있음을 확인하였다. 본 연구에서는 실제 공정의 마이크로 스틱키 정량이 가능한 설비를 제작 하였다. 제작된 설비는 마이크로 스틱키의 정량 뿐만 아니라 환경의 변화에 따른 마이크로 스틱키의 침착성 변화를 볼 수 있도록 하였고, 또한 현장조건 에 적합하도록 다량의 지료분석과 손쉬운 작동이 가능케 하였다. 제작된 마 이크로 스틱키 정량설비를 이용하여 현장 플로테이션 공정을 대상으로 마이 크로 스틱키를 정량한 결과 리젝트의 지료에서 더 많은 량의 마이크로 스틱 키가 존재함을 확인하였다. 이는 소수성의 마이크로 스틱키가 기포와 함께 리젝트로 배출되고 있음을 보여주고 있으며, 또한 3종의 분급된 지료에서 와 이어상에서 탈수된 각각의 백수를 분석함으로써 백수 재활용에 따른 마이크 로 스틱키의 농축현상올 밝혔다. 플로테이션 과정중에 마이크로 스틱키의 거동 파악과 제어를 향상시키기 위하여 MCC를 이용하여 준비된 마이크로 스틱키 모텔물질을 이용하여 실험 실적 부유부상 실험을 실시하였다. 이를 통하여 플로테이션 공정의 마이크로 스틱키 제어 최적화 방안과 고농도의 마이크로 스틱키를 함유한 지료의 처 리를 방안을 검토하였다.
최근 동결지반의 다양한 문제들에 대한 관심이 증대하면서 동결의 영향을 받는 지반의 거동특성에 관한 이론정립 및 체계적인 연구의 필요성이 제기되고 있다. 기존의 정립된 토질역학 이론과는 달리 동결지반에서 온도의 영향과 간극수의 동결에 의한 상변화는 간극수의 이동, 지반팽창, 작용토압의 급격한 증가 등 여러가지 문제들을 야기한다. 본 논문에서는 비동결-동결 전이 상태에서 연속성을 갖는 새로운 응력변수를 도입하여, 동결 작용을 받는 다공질 재료에 대한 THM 역학적 탄소성 구성모델을 유도하였다. 개발된 구성모델을 1차원 팽창압, 동결토의 삼축압축 강도 그리고 일방향 동결실험에 적용하여 해의 안정성과 구성모델의 적용성에 대하여 논의하였다. 수치해석 결과는 동결토의 복잡한 THM현상들을 효과적으로 묘사할 수 있었으며, 동결의 영향하에 있는 지반구조물의 해석과 설계 및 시공될 구조물의 장기거동예측에 활용될 수 있을 것이다.
The flat dilatometer test(DMT) is a geotechnical tool to estimate in-situ properties of various types of ground materials. The undrained shear strength is known to be the most reliable and useful parameter obtained by DMT. However, the existing relationships which were established for other local deposits depend on the regional geotechnical characteristics. In addition, the flat dilatometer test results have been interpreted using three intermediate indicesmaterial index($I_p$), horizontal stres index($K_p$), and dilatometer modulus($E_p$) and the undrained shear strength is estimated only by using the horizontal stress index($K_D$). In this paper, an artificial neural network was developed to evaluate the undrained shear strength by DMT and the ANN, based on the $p_0,\;p_1,\;p_2,\;{\sigma}'_v_0$, and porewater pressure. The ANN which adopts the back-propagation algorithm was trained based on the DMT data obtained from Korean soft clay. To investigate the feasibility of ANN model, the prediction results obtained from data which were not used to train the ANN and those obtained from existing relationships were compared.
형상기억복합재료를 제조하기 위하여 핫프레스 방법을 이용하여 최적의 제조조건을 도출하였으며 냉간압연에 의해 기지재와 강화재의 계면접합을 강화하여 강도를 증가시켰다. 이러한 방법에 의해 제조된 형상기억복합재료에 대하여 외부 하중에 의한 손상정도와 균열의 발생을 감지하여 균열 발생 및 진전을 억제하는 온라인 모니터링 시스템을 개발하고자 한다. 이를 위하여 음향방출 신호의 파라미터를 이용하여 손상에 따른 최적의 AE 파라미터를 도출하였으며 가역시스템을 이용하여 형상기억합금을 가열함으로써 형상기억합금의 수축에 의한 복합재료 내부에 균열진전을 억제시키는 시스템을 개발하였다
7050 Al합금의 응력부식저항성에 미치는 2단 시효처리의 영향을 미세조직관찰, 전기전도도시험 및 SCF값을 평가함으로써 조사하였다. 최대 경도 이상 과시효에 의해 주 강화상인 η'상이 η상으로 변태되었고, 입내 및 입계에 존재하는 η상의 크기와 간격이 커졌으며 그 결과 응력부식저항성이 증대되었다. 2차 시효시간의 증가에 따라 전기전도도값은 증가되었으나 항복강도의 감소로 인하여 SCF값은 감소되었는데, 이러한 결과는 응력부식저항성의 증가를 의미한다. AMS 4107규격을 기준으로 하였을 때 7050 Al합금 단조재의 적정시효조건은 1차시효가 12$0^{\circ}C$에서 6시간, 2차시효는 $175^{\circ}C$에서 12시간이었다.
In the previous experiment, it was found that OCC pre-treatment with Hobat mixer at 20-25% consistency for 3 hrs or more followed by the application of the equal refining time, caused the increase of tensile strength, burst strength, compressive strength and tear resistance, compared to the no pre-treated. Four completely different fibers, which were Hw-BKP, Sw-BKP, White ledger, and OCC were selected for this experiment to investigate the effect of mechanical pre-treatment process on different fibers. From the experiment, it was found that the mechanical pre-treatment did not decrease fiber length at all, but decreased freeness, compared to the no pre-treated, when the same refining time was applied WRVs of the pre-treated fibers were higher than the no pre-treated at the same freeness level. It was speculated that the mechanical pre-treatment induced only hydrophilic nature of fibers without damaging fiber length by delaminating fiber walls. The fiber surface area and the physical strength differences of handsheets will be discussed in the next publication.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.