• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.463-467
• /
• 2000

In this paper, we have implemented the Web Server Patient Monitoring System using PPP. It is composed of two parts. The first part is the Analog board for acquiring ECG signals. The second part is the module for processing and transmitting the acquired signal. The second part is using PPP for dial-up networking, TCP/IP for Internet, HTTP for web browser and JAVA program for a Patient Monitoring Program in one chip. In home, it is not need to establish another network line because it uses a telephone line. And a user who want to monitor a patient's biosignal can monitor a patient without wholly open network because it is the network sewer. The Patient Monitoring Program runs on a web browser by downloaded JAVA codes when a user connect to this system. It can make the Home Patient Monitoring Program decrease cost. It can help to avoid the limitation of monitoring a patient.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.9-10
• /
• 2016

본 논문에서는 멀티 스레드 기반 병렬 프로그램의 동적 분석을 통한 자료경합 탐지를 위해 효율적인 감시 필터링 기술을 제시한다. 제시하는 감시 필터링 기술은 자료경합과 같은 동시성 오류를 탐지하기 위해 프로그램의 수행 중에 발생하는 공유 메모리에 대한 스레드들의 접근 분석 시에 동일한 코드영역을 단순 반복하는 스레드들을 감시대상에서 제외시킴으로써 동적 분석을 위한 추가적인 오버헤드를 최소화한다. 제시하는 필터링 기술을 수행 중 자료경합 탐지 도구에 적용한 실험적 평가를 통해 개선된 수행시간 오버헤드의 제공이 가능함을 보인다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.67-68
• /
• 2013

본 연구는 국내 전체 화재발생 건수에서 가장 높은 비율을 차지하고 있는 주거공간에 대한 화재 및 인명안전의 개선 대책에 관한 기초연구이다. 주거공간은 다른 어떠한 방호공간보다 가장 높은 수준의 안전이 요구되는 소방대상물이다. 국내의 주거공간을 대표하는 공동주택의 안전을 확보하는데 가장 중요한 역할을 하는 것이 화재감시시스템이며 이를 구성하는 요소 중에서도 감지기의 성능이 가장 중요한 역할을 한다. 감지기의 성능은 인간의 두뇌와 같은 기능을 하기 때문이다. 이미 일본의 경우는 공동주택 전용의 화재감시시스템을 개발하고 기준으로 제정하여 널리 보급하고 있는 실정이다. 또한 미국은 공동주택 전용의 화재감시시스템이 별도로 존재하지는 않지만 화재특성 및 화재하중 등에 대한 시험을 통해 다양한 방호공간을 효율적으로 적용할 수 있도록 상세한 코드가 정립되어 있다. 따라서 본 연구에서는 국내 공동주택에 적합한 전용 화재감시시스템을 개발하는데 필요한 기초 연구로서 국내와 방재선진외국의 감지기 설치 및 성능을 검증하는데 필요한 설치 및 시험 기준에 대하여 조사하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.04a
• /
• pp.29-35
• /
• 1998

한국연안 NAVTEX서어비스를 하기 위한 방안을 제안하였다. EEX가 미정인 현실을 감안하여 서비스범위를 평화선내 전 구역으로 하였다. 해양수산부내에 운영실을 두고 , 무인으로 운영되는 동해안 송신소(죽변등대부지), 서해안 송신소(전북부안군 변산면 도청리)를 원격 감시운영하는 방안을 제안하였고, 안테나는 50m급 지선식철탑안테나이며 상부지선 일부를 정관으로 활용하고 접지선은 36본의 100m 급 래디알어어스를 제안하였다. 국문방송도 기존 시설을 겸용하여 방송하기로 하고 ITA No.2코드와 호환가능한 한글 NBDP코드를 제안하였다. 운영국 및 송신국의 시스템 구성과 장비규격, 통신회선등을 전부 제안하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.156-161
• /
• 1992

In this research a monitoring system for turning using NC information and the current of feed motor as a monitoring signal was developed. The overall system consists of modules such as learning process, NC data transmission, generation of forecast information, signal acquisition, monitoring and post process. In the learning process, the reference data and the cutting force equation necessary for monitoring are obtained from the accumulated monitoring results. In the generation of forecast information, the information of forecasted cutting forces is acquired from the cutting force equation and NC program and appended to each NC block as a monitor code. Reliability of monitoring is improved by using the monitor code in the real-time monitoring. Monitoring module is divided into two parts : the off-line monitoring where errors of NC program are checked and the on-line monitoring where the level of motor current is monitored during cutting operations. If the actual current level exceeds the limit value provided by the monitor code in the level monitoring, it is recognized as abnormal. In the event of abnormal status, the post processor sends the emergency stop signal to NC controller to stop the operation. Actual experiments have shown that the developed monitoring system works well.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.74-81
• /
• 2000

In this paper we have developed an image security system based on Internet Web in order to overcome the problem of existing systems that use the dedicated network. The developed system resolves the safety problem of the centralized control model by adapting the distributed control model based on Web, and has the functions of remote control and automatic monitoring for grouped multiple sites on remote Web browser. And the system can operate various computers or operating system because it' s operating software was designed by the concepts of Java Virtual Machine and Virtual Instrument. Also, our system has not need of additional cost for network construction by using Internet and can greatly improve the managemental efficiency of system because the maintenance and publishing of software updates can be performed through Web Server.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1690_1691
• /
• 2009

벨트 컨베이어 설비에서 비상사태 발생 시 비상 정지 동작을 수행하는 풀 코드 스위치(Pull Cord Switch)는 동작 된 스위치의 위치 파악이 어려워 설비 정지시간을 길어지게 하여 막대한 손실을 발생시키게 한다. 이를 해결하기 위해 전력선을 이용한 방법, 단방향 무선통신을 이용한 방법 등이 제안되어 사용되고 있으나, 본 연구에서는 Zigbee 기반의 무선 센서 네트워크를 이용하여 벨트 컨베이어 시스템의 풀 코드 스위치 동작 상태를 실시간 모니터링 할 수 있는 시스템을 제안하고 운용자가 시스템의 장애상태, 위치를 좀 더 다양한 인터페이스를 통하여 감시 할 수 있는 모니터링 시스템을 구현하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2040-2048
• /
• 2010

In contemporary society, though convenience and efficiency of work using information system is growing high, adverse effect problems of malignant code, system hacking, information leak by insiders due to the development of the network are raising their head daily. Because of this, enormous work forces and expenses for the recovery and management of system is needed. The existing system can be divided into two aspects: security solution which surveils and treats virus and malignant codes, and network management solution which observes the system of computer, and practices maintenance and repair such as management, recovery, backup. This treatise applied Active Write Filter mechanism and the technology based on NFS and complemented the maintenance problems of user data of the existing system and designed the system which enables solving problems of intellectual property right such as information protection and illegal work.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.261-265
• /
• 2012

The applications of augmented reality technology is increasing in the several field by IT convergence and we find augmented reality application easily in the smart device application area. And then, to attempt to use augmented reality technology in advantage, exhibitions and performances was activated. However, it less than other fields of augmented reality technology expertise yet. Among them services to Use in fusion with monitoring are lacking. In this paper, we proposed the augmented reality monitoring technology based on smart device. It is able to incorporate QR-code which is already building for the purpose of advertising promotional materials with augmented reality technology in many areas. Therefore, it is able to utilize unattended building or automation equipment facilities using QR-code and environmental monitoring sensor in the industry.