• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1993.10a
• /
• pp.4-4
• /
• 1993

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.777-777
• /
• 2007

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.11-16
• /
• 1993

진동기초의 해석 및 설계에서의 주요사항은 진동하중자체의 특성을 산정하는 것과 기초구조의 수평, 수직, Rocking, Pitching 응답의 해석 및 수평-Rocking이 연계된 운동의 해석이다. 현재 사용되는 진동기초설계의 해석방법은 Reissner(1936)의 반무하지반영역 위에 놓인 원형강판에 대한 해석적 결과를 이용한 여러가지 변형된 방법이 사용되고 있다. 이러한 진동기초의 해석방법은 지반의 모형화하는 방법에 따라 탄성 반무한영역으로 지반을 모형화하는 경우 (Reissner(1936), Shekhter(1948), Sung(1953), Quinlan(1953), 등)와 감쇠-탄성스프링에 의해 지반을 모형화하는 경우 (Lysmer and Richart(1966), Barkan(1962), 등)로 나눌 수 있다. 최근의 실제 설계에는 선형스프링 이론을 바탕으로 하여, 감쇠효과와 진동에 참여하는 흙의 질량영향을 무시하는 Barakan(1962)의 방법이 많이 사용되고 있다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.216-217
• /
• 2000

상자성을 갖는 분자에 대한 분광학 연구에서는 제만(Zeeman) 효과로 생기는 이색성을 이용한 magnetic rotation spectroscopy (MRS)가 널리 사용되고 있다.$^{(1)}$ MRS가 일반적인 흡수 분광법에 비해 더 민감한 측정을 할 수 있기는 하지만 사용하는 편광기의 extinction ratio에 의해 감도가 한정된다. MRS의 감도를 높이는 방법으로는 광경로를 길게 만드는 것을 고려할 수 있다. 일반적으로 공진기 광자감쇠 분광학(Cavity Ring-Down Spectroscopy, CRDS)은$^{(2)}$ 높은 반사율을 갖는 거울을 사용해서 수 km 이상의 광 경로를 만들기 때문에 감도가 높다. (중략)

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2004

This paper describes a new vibration-suppression technique for flexible cantilevered structures by using a pipe containing an internal flow. The stability and dynamic response are analyzed based on the finite element method. The flutter limit and optimum stabilizing fluid velocity are determined in root locus diagrams. The impulse responses of the system are studied by the mode superposition method to observe the damping rate of the motion. The stabilizing effect of an internal flow is demonstrated by impulse responses of the structures with and without an material damping. It is found that the response of the pipe with flow of liquid has a larger effect of, stabilizing than that with flow of gas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.1
• /
• pp.49-57
• /
• 2002

The possibility of a transmission noise reduction of piezoelectric smart panels using piezoelectric shunt damping is experimentally studied. Piezoelectric smart panel is basically a plate structure on which piezoelectric patch with shunt circuits is mounted and sound absorbing materials are bonded on the surface of the structure. Sound absorbing materials can absorb the sound transmitted at mid frequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to reduce the sound transmission at low panel resonances, piezoelectric damping using the measured electrical impedance model is adopted. Resonant shunt circuit for piezoelectric shunt damping is composed of register and inductor in series, and they are determined by maximizing the dissipated energy throughout the circuit. The transmitted noise reduction performance of smart panels is investigated using an acoustic tunnel. The tunnel is a tube with square crosses section and a loud-speaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across panels is measured. Noise reduction performance of a smart panels possessing absorbing material and/or air gap shows a good result at mid frequency region but little effect in the resonance frequency. By enabling the piezoelectric shunt damping, noise reduction of 10dB, 8dB is achieved at the resonance frequencise as well. Piezoelectric smart panels incorporating passive method and piezoelectric shunt damping are a promising technology for noise reduction in a broadband frequency.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.77-82
• /
• 2001

Error characteristics of a mirror loss measurement system using an exponential decay method were studied, with the two samples having about 200-ppm-loss and 30-ppm-loss, respectively. In order to minimize the decay signal deviation from an exponential curve due to cavity length fluctuation, a data average method was tried. The data average method significantly improved the exponential curve fitting error of the decay signal, so that for a 6 decay signal data average the loss measurement error was reduced by about 2.4 times for the 200-ppm-loss mirror and 1.3 times for the 30-ppm-loss mirror compared with a single shot measurement. Day-to-day mirror loss repeatability error for the two samples was investigated. The repeatability error was measured to be about 5% for the 200-ppm-loss mirror and about 26.4% for the 30-ppm-loss mirror. Low decay signal average effect and high repeatability error in the low loss mirror measurement were explained with non-uniform spatial loss distribution of the sample and contamination from the environment, in addition to the error sources of the mirror loss measurement system itself. The influence of cavity length fluctuation and cavity length measurement error on the mirror loss measurement system performance was theoretically calculated. It confirmed that the requirement for the cavity length parameters was not so strict in the mirror loss measurement system of several ppm resolution. ution.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.12
• /
• pp.1091-1097
• /
• 2011

In the present study, TMD(tuned mass damper) with eddy current damping is proposed to suppress the vibration of a cantilever beam effectively. The advantages of TMD are that it is simple and its performance are excellent at any particular frequency. However, TMD may have the low performance at other frequency. To solve this problem and improve its performance, this study applies the eddy current damping to TMD. This TMD with ECD is named as MTMD(magnetically tuned mass damper). MTMD is designed for the vibration suppression of a cantilever beam. The mathematical modeling, simulation, and experiments of the cantilever beam with MTMD are performed. From analytic and experimental results, it can be concluded that the vibration suppression performance of MTMD are excellent.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.467-474
• /
• 2002

이 연구에서는 점탄성감쇠기가 설치된 구조시스템의 통합최적설계 방법을 제시하였다. 최적화를 위한 목적함수로는 구조시스템이 유발하는 사회적 비용을 의미하는 총 생애주기비용을 사용함으로써, 구조제어 시스템의 성능에 기반한 경제적 유익을 극대화하도록 하였다. 구조물의 층별 기둥 강성 및 점탄성감쇠기의 사용량 등을 설계변수로 하여 생애주기비용함수를 정의하였으며, 통합시스템을 동시에 최적화하기위한 방법으로 유전자 알고리즘을 적용하였다. 동일한 초기비용을 사용하며 통합최적설계를 수행하지 않은 설계를 통해 얻어진 지진응답과 비교한 결과, 제안하는 통합 설계방법은 보다 우수한 진동제어효과를 발휘하는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1261-1270
• /
• 2000

This paper is concerned with the development of a general model for predicting material damping in laminates based on the strain energy method. In this model, the effect of interlaminar stress on damping is taken into accounts along with those of in-plane extension/compression and in-plane shear. The model was verified by carrying out the damping measurements on $90^0$ unidirectional composite beams varying length and thickness. The analytical predictions were favorably compared with the experimental data. The transverse shear($$\sigma$_{yz}$) appears to have a considerable influence on the damping behaviors in $90^0$ unidirectional polymer composites. However, the other interlaminar stresses($$\sigma$_{xz}$, $$\sigma$_z$) were shown to have little impact on vibration damping in $90^0$ laminated composite beam.