• Title/Summary/Keyword: 감쇄 특성

Search Result 402, Processing Time 0.027 seconds

Power Amplifier Design using λ/4 DGS(Defected Ground Structure) Bias Line (λ/4 DGS 바이어스 선로를 이용한 전력증폭기 설계)

  • 정시균;정용채
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.9
    • /
    • pp.924-931
    • /
    • 2002
  • In this paper, a new λ/4 bias transmission line that is added dumbbell-shaped defected ground structure(DGS) on ground plane of the conventional λ/4 bias transmission line is proposed. This DGS λ/4 bias transmission line maintains high characteristic impedance, but physical width is wider and length is shorter than that of the conventional bias line. If the proposed bias line is attached on signal transmission line, this bias line can reduces the $3^{rd}$ harmonic signal as well as the$2^{nd}$ harmonic signal. With harmonic reduction characteristics, efficiency and linearity of amplifier are improved. The proposed bias line is adopted in power amplifier on IMT-2000 base-station transmitting band. This paper presents several simulations and experimental results of DGS to show validity of the proposed power amplifier using the new λ/4 bias transmission line. Experimental results represent that the $3^{rd}$ harmonic signal is reduced about 26.5 dB and efficiency is improved about 9.1 % and IMD3 is improved 4.5 dB than the conventional structure.

Electromagnetic properties and attenuation of Mn-Zn ferrite used in the blocking filter application (Blocking filter 자심 재료용 Mn-Zn ferrite 의 전자기적 특성 및 신호 감쇄율)

  • Lee, Hae-Yon;Kim, Hyun-Sik;Kim, Jong-Ryung;Oh, Young-Woo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.11a
    • /
    • pp.95-98
    • /
    • 2002
  • 전력선 통신 blocking filter용 자심 재료를 개발하기 위해서 MnO 24 mol%, ZnO 25 mol% and $Fe_{2}O_{3}$ 51 mol% 의 기본조성에 $MoO_{3}$, $SiO_{2}$, CaO를 첨가하여 $1350^{\circ}C$에서 대기압 상수 A를 7.8롤 고정하고 소결하여 미세구조를 제어하였으며 기본 조성에 $MoO_{3}$ 400 ppm, $SiO_{2}$ 100 ppm and CaO 200 ppm을 첨가한 경우 평균 입경 $25{\mu}m$ 의 균일한 결정립으로 구성된 미세구조를 얻었고 기공의 감소에 의한 치밀화로 $4.98g/cm^{2}$의 고밀도화가 이루어 졌다. 또한 소결체의 균일한 미세구조와 고밀도화로 인해서 8221(${25^{\circ}C}$, 1 KHz) 의 가장 높은 투자율 특성을 나타냈다. 시편의 온도가 증가함에 따라 투자율이 증가되어 ${110^{\circ}C}$에서 13904의 거대 투자융이 측정되었고, 코일의 인가주파수가 1 KHz에서 1 MHz까지 증가됨에 따라 최고 ${102^{\circ}C}$까지 시편 온도가 상승하였다. 가장 높은 투자율 특성을 나타낸 ferrite 코어를 사용하여 단상 및 3상용 블로킹 필터의 감쇄율을 측정한 결과 현재 국내의 전력선 통신용 주파수 대역으로 규정되어 있는 10 KHz ~ 450 KHz 대역에서 각각 -46.46 dB와 -73.9 dB의 최고 값을 얻었다.

  • PDF

Design of the 1.8GHz Strip-line Isolator with high attenuations at harmonic band (고조파 대역에서 높은 감쇄를 갖는 1,8GHz 대역 스트립라인 아이솔레이터 설계)

  • Yoo, Young-Cheol;Eom, Ki-Hwan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.15 no.4
    • /
    • pp.795-802
    • /
    • 2011
  • In this paper, the detailed design procedure of the Y-junction stripline isolator self-contained the filter circuit in the center conductor in order to maximize attenuations below value of 30 dB at 3rd order harmonics is presented. The HFSS is used to simulate 1.8GHz band isolator and the results are compared with the measurement data. These results confirms that the designed stripline isolator is effective in achieving high attenuation above -30 dB at 3rd order harmonics. And it is obtained that the harmonic band of isolator using the ferrite of 0.16T is moved far from operating frequency more 1.2 GHz than one using the ferrite of 0.12T.

A new active common mode voltage Damper to suppress high frequency leakage current of PWM Inverter (새로운 능동형 커먼 모드 전압 감쇄기를 이용한 PWM 인버터의 고주파 누설전류 억제)

  • 구정회;이상훈;박성준;김철우
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.6 no.5
    • /
    • pp.423-431
    • /
    • 2001
  • This paper proposes a new active common-mode voltage damper circuit that is capable of suppressing a common-mode voltage produced in the PWM VSI-fed induction motor drives. The new active common mode voltage damper is consists of a four-level half-bridge Inverter and a common mode transformer with a blocking capacitor. In order to reduce the common mode voltage and high frequency leakage current the active common mode damper applies to the PWM inverter system the compensated voltage of which the amplitude is the same as the common mode voltage and of which the polarity is opposite to the common mode voltage. Simulated using P-SPICE and experimental results show that common-mode voltage damper makes contributions to reducing a high frequency leakage current and common-mode voltage.

  • PDF

PEOPLE-광주과학기술원 한원택

  • Korea Association for Photonics Industry Development
    • Photonics industry news
    • /
    • s.3
    • /
    • pp.28-29
    • /
    • 2001
  • 일반적으로 상용되는 광섬유와는 다른 특성인 광민감성의 증가,새로운 비선형 광학특성의 발현,광흡수 및 발광 특성의 인위적 조절,자기광학적 특성등 새로운 기능의 광통신용 특수 광섬유의 개발 및 제조에 독창적인 광섬유 재료 및 제조 공정기술을 보유하고 있는 한원택 광주과학기술원 교수.현재 광주과학기술원 정보통신공학과 광자기술그룹의 그룹장을 맡고 있으며, 초고속 광네트워크 센터의 총괄책임자로 WDM용 광섬유 소자 응용 기술 개발을 주도하고 있다. 광주 광산업 유치 기획사업과 중국 및 러시아의 광기술 협력을 위한 워크샵의 개최와 교류사업등에 주도적인 역할을 했으며 최근에는 WDM용 감쇄기능을 가진 특수광섬유를 개발,옵토네스트에 기술을 이전해주고 있다.

  • PDF

마운트지지 구조물의 강체특성의 실험적 규명법의 개발

  • 정의봉;류석주;정충길;고동민
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.04a
    • /
    • pp.591-595
    • /
    • 1995
  • 진동구조물의 해석 또는 설계변경 등을 위해서는 구조물의 강체특성(질량, 질량중심위치, 관성모멘트, 관성적, 주축방향)을 정확히 추정할 필요가 있다. 본 연구에서는 Direct System Identification Method를 애용하여 진동 시험으로부터 얻어진 잡음이 혼입된 데이터로 부터 특성행렬(질량행렬, 감쇄행렬, 강성행렬의총칭)을 직접 규명하는 반복계산에 의한 노이즈에 강인한 방법의 개발과 가상중심점을 이용하지 않고 실험으로 부터 얻어지는 병진성분 데이터를 직접 이용하여 강체특성을 추정하는 방법을 개발한다. 마운트 지지된 평판모델에 대한 실험적 응용과 시뮬레이션에 의한 soild 모델 응용으로 본 연구의방법의 타당성을 검증한다.

Decreasing Parameter Decision in Edge Strength Hough Transform (경계선 강도 허프 변환에서 감쇄 파라미터의 결정)

  • Woo, Young-Woon;Heo, Gyeong-Yong;Kim, Kwang-Baek
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.06a
    • /
    • pp.728-731
    • /
    • 2007
  • Though the Hough transform is a well-known method for detecting analytical shape represented by a number of free parameters, the basic property of the Hough transform, the one-to-many mapping from an image space to a Hough space, causes the innate problem, the sensitivity to noise. To remedy this problem, Edge Strength Hough Transform (ESHT) was proposed and proved to reduce the noise sensitivity. However the performance of ESHT depends on the size of a Hough space and image and some other parameters, which play an important role in ESHT and should be decided experimentally. In this paper, we derived a formula to decide decreasing parameter. Using the derived formulae, the decreasing parameter value can be decided only with the pre-determined values, the size of a Hough space and an image, which make it possible to decide them automatically.

  • PDF

A Miniaturized 2-pole Bandpass Filter with Attenuation Poles (감쇄극을 갖는 소형화된 2단 대역 통과 여파기)

  • Kim, Chul-Soo;Lim, Jong-Sik;Kim, Jong-Hwa;Ahn, Dal
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.6
    • /
    • pp.554-559
    • /
    • 2004
  • A novel miniaturized 2-pole band pass filter(BPF) is proposed and it has an overlapped hairpin and slot structure on the upper and bottom plane of microstrip lines. Due to the overlapped structure of a hairpin and a slot, the size of the proposed BPF is quite smaller than that of a general BPF having coupled lines. The size of the proposed BPF is reduced to 33 % comparing with the conventional λ/4 coupled BPF. The attenuation is improved by controlling the attenuation poles properly using the proposed structure. The proposed 2-pole BPF is fabricated with a narrow bandwidth(69 ㎒) at center frequency, 1.9 ㎓ which is difficult to make that narrow bandwidth in the conventional coupled lines due to impractical spacing. The design method in this paper can be applied to the design of other microwave circuits to reduce the size and improve the performances.

Simplified PAR Reduction Technique for MIMO-OFDM System (MIMO-OFDM 시스템에서 간략화된 PAR 감쇄 기법)

  • Song Hyoung-Kyu;Kook Hyung-Joon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.12C
    • /
    • pp.1181-1185
    • /
    • 2005
  • A combining of MIMO signal processing with OFDM is regarded as a promising solution of enhancing the performance of next generation wireless system. Therefore, in this paper, an OFDM-based wireless system employing layered space-time architecture is considered for a high-rate transmission. In the MIMO-OFDM system, we evaluate the PAR performance using the SLM approaches. The investigated SLM scheme for MIMO-OFDM signals selects the transmitted sequence with lowest average PAR over all transmitting antennas and retrieves the side information very accurately at the expense of a slight degradation of the PAR performance. The low probability of false side information can improve the overall detection performance of the MIMO-OFDM system with erroneous side information compared to the ordinary SLM approache, respectively. Also, we provide closed form of the average BER performance in MIMO-OFDM system using analytic approach.

An Efficient Channel Estimator for OFDM-CDMA Systems in Fading Channels (감쇄채널 환경에서 직교 주파수 분할 다중화-부호분할 다중접속 시스템을 위한 효율적 채널 추정기)

  • 정혜정;김형명
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.8A
    • /
    • pp.1298-1310
    • /
    • 2001
  • 이 논문에서는 채널 상태가 천천히 변할 때, 직교 주파수 분할 다중화-부호분할 다중접속 시스템에 적합한 채널 추정 방법을 제안하고 성능을 분석한다. 제안한 채널 추정 방법은 시간과 주파수 영역 모두에 파일럿 심볼을 삽입하고, 이산 퓨리에 변환 후 영을 채워 넣는 방법을 이용한 내삽법으로 모든 부채널의 전달 함수를 얻는다. 또한 변환 영역에서 저대역 여파를 통해 받은 파일럿 신호에 존재하는 가산성 백색 정규 잡음의 영향을 상당히 줄일 수 있다. 이 때 저대역 여파기의 차단 주파수는 채널의 다중경로 수에 따라 정해진다. 같은 방법을 이용한 내삽법을 시간축으로 적용하여 시간에 따라 변하는 부채널의 채널 응답을 얻을 수 있다. 이 논문에서는 여러 가지 내삽법에 대한 평균 제곱 오차 성능을 수식적으로 제시한다. 제안한 저대역 여파를 결합한 내삽법을 쓰면 채널의 통계적 특성에 관한 정보 없이, 그리고 훨씬 적은 계산량으로 선형 최소 평균 제곱 오차 추정기와 비슷한 성능을 얻는다. 레일리 감쇄 채널에 대한 모의 실험을 통해 같은 비트 오류율에 대한 신호 대 잡음 비의 이득이 있음을 보인다.

  • PDF