• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.37-42
• /
• 1983

The TV IF SAW filter if designed using the windowing method. The procedure for fabricating SAW filters is described. The filter is fabricated on the Y-cut, Z-propagation LiNbO3 wafer. The passband ripple and the smaller upper sidelobe attenuation are obseryed. Further improvements and the mass production can be expected.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2192-2194
• /
• 2000

광섬유에서 전송되는 신호를 예측하기 위하여 일반화된 단계분할 유한요소법 (split-step finite element method, 55-FEM)을 이용한 비선헝 슈뢰딩거 방정식의 해석 방법을 구현하였다. 사용된 방정식은 분산 및 감쇄, 그리고 비선형 효과를 모두 고려하도록 하였다. SS-FEM으로 계산된 수치 결과는 엄밀해와 잘 일치하였음을 확인하였으며, 계산 시간을 푸리에법과도 비교하였다.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.133-139
• /
• 2005

In this paper, the ventilation performance of suspended particulates in indoor side was investigated by step-down method. Experiments were performed in function of mechanical ventilation types and locations of supply and extract air. The type 2 ventilation system shows the highest removal characteristics rather than other 2 types. It means that the displacement ventilation has also good decay rates of concentration compared to mixing ventilation.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.94-96
• /
• 2005

포항방사광가속기의 전자빔수명을 연장하기 위한 3차 하모닉 초전도 RF 공동기를 개발하고 있다. 저장링 빔물리 계산에 따르면 3차 하모닉 초전도 RF 공동기를 설치할 경우 점자빔의 수명이 약2.3배 증가하는 것으로 나타났다. 또 이 공동기를 설치할 경우 란다우 (Landau) 감쇄 (damping)에 의한 빔의 안정화도 개선되는 효과가 있다. 본 논문은 이것을 실현하기 위한 초전도 RF 공동기의 전자기장 분포와 고차원 전자장 계산을 통하여 최적의 공동기의 모양 결정과 설계 특성에 대한 것을 보고 하고자 한다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1037-1039
• /
• 2004

A typical conventional systems of a linear motion use rack and pinions or ball screws to convert rotary motions from DC servo motors. A linear motor has been used a several field for a MEMS technology and a aircraft carrier. We was studied a transient response of a linear actuator with a damping ratio, spring constant and a pressed power.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.73-81
• /
• 1999

The intention of this research is to give criteria of designing devices using ER fluids and MR fluids. The Properties of commercial ER fluids and MR fluids are compared using a rotational viscometer. The yield strength is compared upon changes of shear rate, temperature and applied fields. MR fluids seem less sensitive to temperature change than ER fluids. In cases of MR and ER fluid dampers, the time delay and damping force are measured in tension and compression mode when the applied field changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.1027-1031
• /
• 2002

In this paper, the non linear characteristics of HPA (High Power Amplifier) is improved by using predistorter. Predistorter consists of 0 degree and 90 degree couplers, complementary amplifier, shottky diodes, and attenuators. Gain of the Linearized HPA is 54㏈ at 1960㎒ - 1980㎒. IMD (Inter Modulation Distortion) characteristic shows -58㏈c at 39㏈m/tone ⓐ1.23㎒. The IMD performance of this predistorter is improved by 14㏈.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6804-6809
• /
• 2014

This paper presents a bandpass filter using a current differencing transconductance amplifier (CDTA)s for application to low-voltage and low-power analog signal processing systems. The presented filter employs grounding and floating active inductors, which are composed of two or three CDTAs, and is capable of realizing all the standard functions of the filter without requiring any component matching criteria or extra active components. The HSPICE simulation result of the designed active bandpass filter showed that it had a 10MHz center frequency with -2.5dB attenuated bandwidth from 9.5 MHz to 10.5 MHz, and -50dB from 8 MHz to 17 MHz.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.26-31
• /
• 2015

This paper deals with a size-reduced Ku-band waveguide limiter. Basically, it passes the signal from 16.125 GHz through 16.375 GHz, but when excessively high power is injected to the input port, it should change to a bandstop filter. Furthermore, it is required to change to bring attenuation by more than 20 dB and 50 dB over a narrow band and the entire passband, respectively. Therefore, in order to meet this requirement, a limiting device is implemented with multiple PIN-diode posts that enable the limiter to be the bandpass filter and stopband one at the off and on states of the PIN-diode switch, respectively. So, the design goes through the equivalent circuit modelling and the geometry is realized in the accurate electromagnetic analysis CAD tool. Finally, the result is discussed to shed light on whether it complies with the aforementioned requirement.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.5
• /
• pp.575-581
• /
• 2007

Though the Hough transform is a well-known method for detecting analytical shape represented by a number of free parameters, the basic property of the Hough transform, the one-to-many mapping from an image space to a Hough space, causes the innate problem, the sensitivity to noise. To remedy this problem, Edge Strength Hough Transform (ESHT) was proposed and proved to reduce the noise sensitivity. However the performance of ESHT depends on the size of a Hough space and image and some other parameters which should be decided experimentally. In this paper, we derived formulae to decide 2 parameter values; decreasing parameter and broadening parameter, which play an important role in ESHT. Using the derived formulae, 2 parameter values can be decided only with the pre-determined values, the size of a Hough space and an image, which make it possible to decide them automatically. The experiments with different parameter values also support the result.