• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.228-228
• /
• 2018

강변여과는 지하수 인공함양 방식 중 유도함양(induced recharge) 또는 간접함양 방식에 속한다. 이는 하천 및 강변 부근에 집수시설을 설치한 후, 미고결층 대수층(unconsolidated aquifer)의 자연 오염 저감능을 이용하여 지표수를 간접 취수하는 방식으로 수질이 불량한 지표수가 대수층을 관류하면서 희석, 화학적 이온 교환 및 반응, 흡착, 생물막(biofilm; 미생물에 의한 자연저감), 여과 등을 통하여 수질이 개선된다. 강변여과수내의 용존 농도가 높은 철과 망간은 수처리 비용증가, 용수관정 및 시설물의 수명단축을 초래한다. 따라서 강변여과 지역의 미고결 대수층에서 효과적인 철과 망간 동시 제거(vyredox)를 위해 에어서징(air surging)과 블록 서징(block surging)을 실시하기 위해서 실내 물탱크 모델(water tank model)에서 에어서징에 따른 공기 순환 우물시스템을 관찰하였으며, 이를 바탕으로 현장시험(Test bed)에 적용하였다. 미고결 대층수층에서의 철 망간은 음용수 기준치(각각 0.3 mg/L)를 초과하고 있으며, 강변여과 취수 개발 및 이용을 제한하는 요인이 되고 있다. 본 연구에서 사용된 에어서징과 블록서지 기술은 자갈층 및 미고결 대수층에 충진된 슬라임 및 폐색(clogging)을 제거함과 동시에 관정 주변의 대수층의 투수성 개선과 산화환경으로 치환되며, 대수층에 잔존하는 철/망간의 산화물들을 관정내로 빼낼 수 있는 방법이다. 따라서 서징에 따른 폐색 제거효율을 검토한 결과에서 철 망간 이온농도 저감효과와 관정 주변의 수리전도도(hydraulic conductivity) 및 저류계수(coefficient of storage)가 증가한 것으로 나타났다. 이와 같이 강변여과에 의한 폐색은 미고결층내 공기주입 및 블록서지를 통하여 철/망간 이온농도 저감 및 수리특성 개선 효과에 유용한 것으로 평가된다.

• Journal of Distribution Research
• /
• v.7 no.1
• /
• pp.87-103
• /
• 2002

This study shows the effect of individual decision style on the Bullwhip effect of supply chain. There are four individual decision styles developed by Rowe and Boulgarides(1992). The analysis of the relationship between individual decision style and supply chain dynamics is focused on overshot against final consumer order rate. Multi methodologies are used to meet the goal of this study, which are survey, game and simulation. As a result of this study, the Bullwhip effect of supply chain isn't influenced by individual decision style. This study shows different result in comparision with the prior research results that individual fact affected the Bullwhip effect of supply chain, Therfore, it is important to improve supply chain infrastructure and system than the individual fact for decreasing the Bullwhip effect of supply chain.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.10
• /
• pp.5-12
• /
• 2021

The deterioration of facilities is an unavoidable phenomenon. For the management of aging facilities, cracks can be detected and tracked, and the condition of the facilities can be indirectly inferred. Therefore, crack detection plays a crucial role in the management of aged facilities. Conventional maintenances are conducted using the crack detection results. For example, maintenance activities to prevent further deterioration can be performed. However, currently, most crack detection relies only on human judgment, so if the area of the facility is large, cost and time are excessively used, and different judgment results may occur depending on the expert's competence, it causes reliability problems. This paper proposes a concrete crack detection framework based on machine learning to overcome these limitations. Fully automated concrete crack detection was possible through the proposed framework, which showed a high accuracy of 96%. It is expected that effective and efficient management will be possible through the proposed framework in this paper.

• Information Systems Review
• /
• v.8 no.3
• /
• pp.201-223
• /
• 2006

This study surveys the current state of the art in the field of IT investment and performance in domestic finns and investigates the statistical significance of various hypothesis of previous relevant researches. Data of 145 information systems of 133 firms have been collected. The amount of IT budget in 2005 has increased to the level of 2.53% of gross revenue of the firms and IT business value has also increased as compared to the previous year. As results of MANOVA test, it has been found that the amount of IT budget does not affect the level of IT business value. In other words, the relationship between IT investment and IT business value does not exist. And among ten factors which has been known to determine IT business value in previous researches, only three factors have been found to affect the level of IT business value: the technical quality of information systems, CIO leadership in the context of resource allocation and decision makings, and the capability and commitment of the user department. These finding provide insight for both practitioners and researchers.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.677-684
• /
• 2016

For realistic rendering volume to calculate the light effects as well as the shade is essential. In order to produce the high quality of the resulting image, it is necessary to represent a global illumination, and it should be considered an indirect effect of the direct impact and scattering of light. It requires a lot of resources in order to perform this operation and, in particular, is very expensive when large amounts of data to be rendered as a volume data is consumed. In this paper, we generate a scatterer template according to the physical laws for each material. Considering that each object having material property stores photons of the template based on the Lambert illumination model. When the volume rendering in this paper, using the photon is stored in the template, based on the voxel to be sampled within the examination volume occluded, and it represents the global illumination of the scattering. Because the materials produced by the template requires a less resource only if comprised of a complex material, a simple operation can be expressed within the scattering volume at a low cost through.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.675-682
• /
• 2015

Current design codes such as AASHTO LRFD or Korean Highway Bridge Design Code recommend of using static force for designing bridge column against vehicle collisions. However, there was an accident that the bridge was collapsed shortly after vehicle impact on bridge pier in Nebraska(near Big Spring, 2003). It was found that the second largest cause of bridge collapse is collision after hydraulic causes. It can be thought that the possibility of truck-bridge collision are getting increasing as the size of truck increases and traffic condition are becoming improved. However, dynamic behavior under the impact loading seldom considered in bridge design procedure due to computational cost and time. In this study, in order to reduce the computational cost for dynamic impact analysis, model reduction method was developed. Obtained results of residual displacement were compared with the results of direct impact simulations.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2320-2322
• /
• 2004

전자제어식 미끄럼방지 제동장치 (ABS, Antilock Brake System)는 차량의 급제동시 발생할 수 있는 바퀴의 슬립을 방지하여 차량의 제동거리를 단축시키고 주행 성능을 향상시키는 차량 내 안전장치이다. 지난 몇 년 동안 공압식 제동시스템을 사용하는 대형차량에 적합한 미끄럼방지 제동 제어기를 연구해 왔다. 이 제어기는 바퀴의 슬립율과 그 변화량을 이용한 제어 법칙을 유도하여, 제어 파라미터로 사용하고 있다. 이러한 제어 파라미터의 튜닝에는 맡은 반복적인 실험이 요구된다. 이러한 요구에 부응하기 위하여 차량의 제동을 실시간으로 모사 할 수 있는 HILS (Hardware In-the Loop Simulation) 시스템을 개발, 구축하였다. 개발 HILS는 공압식 브레이크 시스템 및 14 자유도를 가지는 차량 동역학 모델 및 타이어-바퀴 동역학을 소프트웨어 모델로 사용하고, 개발 중인 전자제어식 미끄럼 방지 제동 제어기를 하드웨어로 사용하여, 바퀴속도 센서 신호 모의 장치 및 공압 엑추에이터 모의 신호등의 인터페이스 장치를 사용하여 제동중인 차량의 상태를 실시간으로 시뮬레이션 및 감시할 수 있다. 이 개발 HILS를 이용하여 제동 제어기의 제어 파라미터의 튜닝을 짧은 시간에 성공적으로 끝낼 수 있었을 뿐만 아니라, HILS 실험을 마친 제어기는 미끄럼 방지 제동 시험장에서 실차 주행 시험을 무사히 마침으로써, 개발 기간과 비용을 절감할 수 있는 하드웨어를 이용하는 시뮬레이션의 효용성을 간접적으로 증명하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.941-951
• /
• 2015

In the recent years, Korean construction companies have been awarded 680 billion USD in the oversea projects which lead to a successful quantitative growth. However, due to the lack of capability in the core technology and project management compared to the leading companies, in addition to low-price bidding, massive deficit projects have caused problems to the companies. In order to overcome the limitations of the lack of capabilities, the term constructability has been researched recently by developed countries to apply in the practical use. The concept of constructability must be applied for Korean companies to compete in the EPC construction projects. The term constructability is defined as the factor that affect the overall construction process of a project which is defined by the ease of construction and to secure the project quality. Therefore, this study aims to develop a constructability assessment model using the structural equation to assess the factors that affect the constructability in the design and construction stage. The purpose of using the structural equation is to analyze the direct and indirect correlation between each factor that affects the international construction projects. Total of 8 latent variables and 34 measured variables are derived through literature review, corporate reports, experts' interview and surveys. The result of the model suggests the constructability factors that are to be managed the most efficiently to reduce cost, time and improve the quality as well as a countermeasure strategy to successfully execute the target international construction projects.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.99-106
• /
• 2013

Personal information protection has become one of the most impending business issues because leakage of personal information can cause tremendous financial losses and image degradation. Consequently, personal information protection initiatives have been recognized widely in business. To invigorate personal information protection investments, performance measurement method such as cost benefits analysis or qualitative analyses are needed, which have not been studied enough in the previous studies. This study proposes a performance measurement model which can include quantitative and qualitative analyses in the context of personal information protection investments. A comparative analysis has been performed on security investment and IT investment performance measurements, which leads to choose the WiBe method (developed by the German Interior Ministry), considering the privacy characteristics and the method's applicability. In particular, the quantitative effect measured how proactive threat assessment based on the way according to the nature of the businesses and organizations of privacy and possible investment decisions. This study proposes the 16 performance indicators, which turn out to be meaningful in terms of their materiality and feasibility by conducting focus group interviews of 25 experts on personal information protection.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.3 s.3
• /
• pp.116-123
• /
• 2000

SOC projects entail inherently large-scale works, and need much capital and time. Because of these features, the design activities in SOC projects are performed through a complicated process involving many organizations. A great deal of information is generated and vanished during the process, and the communication among the related organizations plays a very important role in successful fulfillment of SOC projects. But, because the method of information communication has not yet systematically established, there are many difficulties in sharing information. This study aims at establishing the design interface management model which enables the participants to effectively share the information during the design phase. The contents of the study include (1) Restructuring performance organization, (2) A decision making method in collaborative design through partnering with experts, (3) A method to develop Open Design Information Integrated model using Standardization(ODIIS).