• Environmental and Resource Economics Review
• /
• v.28 no.3
• /
• pp.355-383
• /
• 2019

This study is to investigate whether averting costs for wearing $anti-PM_{10}$ masks and using air purifiers at home to reduce exposure from $PM_{10}$ are influenced by subjective risk perceptions and/or objective $PM_{10}$ concentration levels, whose estimates will be used to measure the willingness to pay for $PM_{10}$ risk reduction. An empirical analysis was conducted on a sample of 1,224 respondents who participated in the web-based survey in the late October of 2017. As we reflect the potential endogeniety bias in the estimation of averting cost functions of using air purifiers, the coefficients of risk perception were differed by 6~7 times. Respondents. subjective risk perceptions were influenced by individuals' knowledge, attitudes and demographic variables, as well as the levels of $PM_{10}$ concentrations in their residential region. The marginal willingness to pay for risk reductions at the mean levels of their risk perceptions were measured at 1,000 won per month from wearing $anti-PM_{10}$ masks and 6,000 won for using air purifiers respectively.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.55-61
• /
• 2021

In this study, microbes were collected before and after disinfection using ANIOS(ANIOSURF Premium NPC) and compared the areas where the radiological technologist and the patient frequently contacted the chest X-ray. From September 1st to September 7th, 2020. in P Hospital in Deagu, 4 region were collected in a 10×10 size using a sterile cotton swab of the transport medium, and before and after disinfection results were obtained through the colorimetric method. As a result, n the X-ray tube handle Proteus mirabilis, Staphylococcus epidermidis, Bacillus spp., Candida spp., and in the Chin region Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, NTM, and in the Chest region Proteus mirabilis, Enterococcu faecium, Pseudomonas aeruginosa, and in the Palm region NTM, Candida spp. were detected, and 103 CFU(Colony Forming Unit) or more were measured. After disinfection, only X-ray tube handle was detect Bacillus spp. and more than 102 CFU was measured. Microorganisms found prior to disinfection can cause opportunistic infections, Experimental results showed that Aniosulf(0.25%) is more economical and disinfectant than ethanol(70-90%) and isopropyl alcohol(70-90%). However, further research is needed on the detection of Bacillus spp. resultingly this research is useful basic data of infection control in Radiography room and prevention secondary infections.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.219-225
• /
• 2020

Importance of touch equipment and smart learning increases and public institutions and educational facilities are applying smart devices to their daily environments. However, users of public smart devices are at risk of being exposed to the direct and indirect spread of infectious diseases. This study develops an exo-finger that wraps the fingertips of smart device users and is intended to have a disease prevention effect when used on public equipment. An exoskeletal body was fabricated by inserting a secondary material which is a mixture of the activating material, carbon black (CB) and a macromolecular polymer (elastomer) into a mold. This device was confirmed to have a touch function when the CB content was 0.030 wt% or higher, and the content of the elastomer was varied so that it could have a friction force similar to that when a person touches a smart device (a friction coefficient of 2.5). Through experiments, it was concluded that the CB content had little effect on the friction coefficient. As a result of testing the completed prototype on a smart device, it was proven that the developed exoskeletal device can be useful in situations where it is impossible to touch due to wearing protective gears, or when equipment such as gloves is used to prevent the spread of infectious diseases.

• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.211-228
• /
• 2022

As social media marketing becomes prevalent, it is necessary to understand the administrative role of managers in promoting user engagement. However, little is known about how community managers enhance user engagement in social media. In this research, we study how managers can boost online user participation, including clicking likes and writing comments. Using the SUR (Seemingly Unrelated Regression) model, we find out that the active participation of managers increases user engagement of both passive (likes) and active (comments) ones. In addition, we find that the number of emotional words included in posts has a positive effect on the passive engagement whereas it negatively affects the active engagement. Lastly, the congruency between posts and comments positively affects users' passive engagement. This study contributes to prior literature related to online community management and text analyses. Furthermore, our findings offer managerial insights for practitioners and social media managers to further facilitate user engagement.

• Korean Journal of Culture and Social Issue
• /
• v.29 no.1
• /
• pp.53-74
• /
• 2023

The purpose of this study was to identify the priming effects of disaster-related news. Specifically, this study aimed to examine the priming effects about trauma words and neutral words according to the geographical and psychological distance from the disaster. The participants in this study were 75 college students who had not experienced the Daegu subway fire accident, and whom were not ruled out after completing the screening measure completing the screening measure the completion of questionnaires for screening. All participants conducted a lexical decision task after watching a news video about the Daegu subway fire accident. The design was a 2 (Geographical distance: close vs. distant) × 2 (Psychological distance: close vs. distant) × 2 (Priming type: trauma priming vs. neutral priming) mixed-design. The results of this study are summarized as follows: First, the group which was geographically closer to the disaster tended to revealed a largerbigger priming effect than the distant group-a trend toward significance. Second, within the psychologically closer to the disaster, group, for those who were geographically closer too, the priming effect was larger for those who were geographically closer geographically closer than for the geographically distant group. Third, the geographically closer group had a largerbigger neutral priming effect than the distant group. Fourth, the psychologically distant group had a largerbigger neutral priming effect than the close group. To sum up, this study identified that disaster news coverage may have an implicit effect on people, and this influence can change according to the geographical and psychological distance. Finally, this study discussed the limitations of the study and recommendations for further research.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.331-344
• /
• 2023

The performance of the existing tunnel scanning system was analyzed through the post-evaluation of NETIS (New Technology Information System) and Inspection Support Technology Performance Catalog. Suggestions for improvement and development direction of the tunnel scanning system were deduced. As new technology of Japan gave priority to providing user-centered information, it was possible to objectively compare and analyze the characteristics of various tunnel scan systems through post-evaluation of NETIS and standard test methods in the Inspection Support Technology Performance Catalog. Construction New Technology of Korea was centered on suppliers of technology certification, making it impossible to objectively compare the performance of tunnel scanning systems. The performance was compared and evaluated indirectly by comparing the specifications of the camera, which is a core device of Japan's tunnel scanning system. For the future development of tunnel scanning systems, high-resolution and fast exposure performance of cameras and corresponding high-intensity lighting devices are required. For this purpose, it is necessary to make an experimental environment in which the performance of the camera and lighting can be analyzed indoors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.507-515
• /
• 2008

In this study, a method predicting the displacement response of structures from the measured dynamic strain signal is proposed by using mode decomposition technique. Evaluation of bridge stability is normally focused on the bridge completed. However, dynamic loadings including wind and seismic loadings could be exerted to the bridge under construction. In order to examine the bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. Because it may be not easy for the displacement response to be acquired directly on site, an indirect method to predict the displacement response is needed. Thus, as an alternative for predicting the displacement response indirectly, the conversion of the measured strain signal into the displacement response is suggested, while the measured strain signal can be obtained using fiber optic Bragg-grating (FBG) sensors. As previous studies on the prediction of displacement response by using the FBG sensors, the static displacement has been mainly predicted. For predicting the dynamic displacement, it has been known that the measured strain signal includes higher modes and then the predicted dynamic displacement can be inherently contaminated by broad-band noises. To overcome such problem, a mode decomposition technique was used. Mode decomposition technique estimates the displacement response of each mode with mode shape estimated to use POD from strain signal and with the measured strain signal decomposed into mode by EMD. This is a method estimating the total displacement response combined with the each displacement response about the major mode of the structure. In order to examine the mode decomposition technique suggested in this study model experiment was performed.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.156-168
• /
• 2024

This study was carried out to provide fundamental data for forest land and the environment by investigating the vegetation structure and soil properties of forest land where Sarcodon impricatus are present. The study area was divided into the Quercus mongolica community, dominated by Q. mongolica and the Quercus variabilis community, a mixed forest with Q. variabilis, Q. mongolica and Pinus densiflora. Also, Calamagrostis arundinacea in the former community and Disporum smilacinum and Carex siderosticta in the latter community showed significant levels as indicator species. Both communities showed a strong correlation between available phosphate and pH, sand, and clay, and the high organic matter content and slightly acidic pH of the soil are believed to be related to the development of S. impricatus. The species appearing at the lower layer continue to dominate because the species appearing at the upper layer have secured realized niches. The site was distributed in a relatively humid place in a north-east direction, and soil was developed with a thin litter layer and low rock exposure. In the selected S. impricatus growing areas, vegetation centered on highly adaptable species to disturbance or external interference was developed. Therefore, it is expected to be used as fundamental data to promote the occurrence of S. impricatus during artificial cultivation, as it is possible to identify the stand where S. impricatus occurs indirectly.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.377-388
• /
• 2022

Laboratory-scale experiments were performed to identify the As removal mechanism of the residual slag generated after the mineral carbonation process. The residual slags were manufactured from the steelmaking slag (blast oxygen furnace slag: BOF) through direct and indirect carbonation process. RDBOF (residual BOF after the direct carbonation) and RIBOF (residual BOF after the indirect carbonation) showed different physicochemical-structural characteristics compared with raw BOF such as chemical-mineralogical properties, the pH level of leachate and forming micropores on the surface of the slag. In batch experiment, 0.1 g of residual slag was added to 10 mL of As-solution (initial concentration: 203.6 mg/L) titrated at various pH levels. The RDBOF showed 99.3% of As removal efficiency at initial pH 1, while it sharply decreased with the increase of initial pH. As the initial pH of solution decreased, the dissolution of carbonate minerals covering the surface was accelerated, increasing the exposed area of Fe-oxide and promoting the adsorption of As-oxyanions on the RDBOF surface. Whereas, the As removal efficiency of RIBOF increased with the increase of initial pH levels, and it reached up to 70% at initial pH 10. Considering the PZC (point of zero charge) of the RIBOF (pH 4.5), it was hardly expected that the electrical adsorption of As-oxyanion on surface of the RIBOF at initial pH of 4-10. Nevertheless it was observed that As-oxyanion was linked to the Fe-oxide on the RIBOF surface by the cation bridge effect of divalent cations such as Ca²⁺, Mn²⁺, and Fe²⁺. The surface of RIBOF became stronger negatively charged, the cation bridge effect was more strictly enforced, and more As can be fixed on the RIBOF surface. However, the Ca-products start to precipitate on the surface at pH 10-11 or higher and they even prevent the surface adsorption of As-oxyanion by Fe-oxide. The TCLP test was performed to evaluate the stability of As fixed on the surface of the residual slag after the batch experiment. Results supported that RDBOF and RIBOF firmly fixed As over the wide pH levels, by considering their As desorption rate of less than 2%. From the results of this study, it was proved that both residual slags can be used as an eco-friendly and low-cost As remover with high As removal efficiency and high stability and they also overcome the pH increase in solution, which is the disadvantage of existing steelmaking slag as an As remover.

• Journal of the Korean Society of Radiology
• /
• v.7 no.2
• /
• pp.121-129
• /
• 2013

In this study measured patient exposure dose for purpose exposure area and peripheral critical organs by using optically stimulated luminescence dosimeters (OSLDs) from computed tomography (CT), based on the measurement results, we predicted the radiobiological effects, and would like to advised ways of reduction strategies. In order to experiment, OSLDs received calibration factor were attached at left and right lens, thyroid, field center, and sexual gland in human body standard phantom that is recommended in ICRP, and we simulated exposure dose of patients in same condition that equal exposure condition according to examination area. Average calibration factor of OSLDs were $1.0058{\pm}0.0074$. In case of left and right lens, equivalent dose was measure in 50.49 mGy in skull examination, 0.24 mGy in chest, under standard value in abdomen, lumbar spine and pelvis. In case of thyroid, equivalent dose was measured in 10.89 mGy in skull examination, 7.75 mGy in chest, 0.06 mGy in abdomen, under standard value in lumber spine and pelvis. In case of sexual gland, equivalent dose was measured in 21.98 mGy, 2.37 mGy in lumber spine, 6.29 mGy in abdomen, under standard value in skull examination. Reduction strategies about diagnosis reference level (DRL) in CT examination needed fair interpretation and institutional support recommending international organization. So, we met validity for minimize exposure of patients, systematize influence about exposure dose of patients and minimize unnecessary exposure of tissue.