• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2056-2060
• /
• 2008

도시하천의 오염원은 점오염원과 비점오염원으로 분류되어 점오염원은 하천유입 전에 차집하여 하수처리장에서 처리하는 체계가 갖추어져 있으나 전체 오염부하량의 $30%{\sim}40%$ (BOD기준)로 추정되는 비점오염원은 차집되거나 처리되지 않고 그대로 하천에 유입되고 있는 실정이다. 비점오염원은 불특정 오염원으로서 지표의 오염물질이나 합류식 하수관거의 하수가 강우에 의해 발생한 유출과 함께 하천으로 유입(CSOs)되어 우천 시에 하천을 오염시키는 가장 큰 원인이 되고 있으므로 이의 저감하기 위한 효과적인 비점오염원 관리방안이 요구된다. 본 연구에서는 대상유역인 부산광역시에 위치한 온천천 유역을 주요토구별 43개 유역으로 구분하여 SWMM(Storm Water Management Model)을 구축하였고 개별 토구에 Divider를 설치하여 일정 차집량을 초과하는 유량은 처리장으로 유입되는 것으로 모의하였다. 장치형 처리시설은 농도에 따라 일정효율을 가지고 처리시설의 임계유량을 초과하는 경우는 미처리되어 방류되는 것으로 가정하였으며 처리장으로 차집된 유량도 처리장의 시간최대 유량을 초과하는 유량은 간이처리 후 방류되는 것으로 가정하여 시나리오에 따라 모의하였다. 각 토구별로 처리시설을 설치한 경우의 처리효율과 차집비율을 증가시켜 처리장에서 일괄처리하는 경우의 처리효율을 차집비율별로 검토하여 최적의 차집비율을 검토하였다. 또한 오염원 관리측면의 면적당 축적부하량 저감과 발생량 관리측면의 토구의 차집비율 증가 및 토구에 대한 처리시설 설치비율에 따른 효율을 검토하여 처리효율, 오염원 저감 및 차집비율에 대한 상관관계를 도출하였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.24-34
• /
• 1990

In this paper, the formulation of a new simplified finite element is made to analyze the ultimate strength of damaged tubular members subjected to combined axial force and end moment. A damaged tubular member that has the bending deformation and the local dent is modeled by beam elements. Tangent elastic stiffness matrix of a beam element which contains the effect of the geometric nonlinearity is derived by using the updated Lagrangian approach. Here the contribution of the stiffness in the dented area is neglected since its resistance against the external loads is considered to be small. A fully plastic interaction curve of the element under combined loads taking account of the local dent effect is selected as a yielding criterion at each nodal point. Also tangent elasto-plastic stiffness matrix of the element is formulated by plastic node method. Comparison with the present solution and the existing experimental results is made showing that the present method gives quite an accurate solution.

• Journal of Korean Society of Forest Science
• /
• v.94 no.3 s.160
• /
• pp.161-167
• /
• 2005

Above and belowground biomass for Phyllostachys pubescens was determined in Jinju, Gyeongsangnam-do. Regression analyses of dry weights of culms, foliages, and twigs versus diameter at breast height were used to calculate regression equations of the form of log Y = a + blogX. Total aboveground biomass for Phyllostachys pubescens was 69.7 ton/ha and rhizomes and roots biomass were 13.7 ton/ha and 7.5 ton/ha, respectively. Culms account for about 60% of total aboveground biomass. The aboveground biomass of each component was decreased in the order of culms>foliages>twigs. As diameter at breast height grew thicker, the proportion of culms to total aboveground biomass increased. The proportion of dry weight of culms to green weight gradually increased with height in a bamboo tree and ages. Nutrients (kg/ha) of litter layer were distributed as follows: N(45.1), Ca(17.3), K(6.1), Mg(3.6), P(3.5) and Na(0.7). Nitrogen and K were given much weight in total nutrients of rhizomes and roots. These results will be useful in measuring carbon stock and drawing up management plan to increase it for Phyllostachys pubescens stand.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.19-47
• /
• 2015

In this era of knowledge economy, a variety of virtual communities are proliferating for the purpose of knowledge creation and utilization. Since the voluntary contributions of members are the essential source of knowledge, member turnover can have significant implications on the survival and success of virtual communities. However, there is a dearth of research on the effect of membership turnover and even the method of measurement for membership turnover is left unclear in virtual communities. In a traditional context, membership turnover is calculated as the ratio of the number of departing members to the average number of members for a given time period. In virtual communities, while the influx of newcomers can be clearly measured, the magnitude of departure is elusive since explicit withdrawals are seldom executed. In addition, there doesn't exist a common way to determine the average number of community members who return and contribute intermittently at will. This study initially examines the limitations in applying the concept of traditional turnover to virtual communities, and proposes five membership fluidity measures based on a preliminary analysis of editing behaviors of 2,978 featured articles in English Wikipedia. Subsequently, this work investigates the relationships between three selected membership fluidity measures and group collaboration performance, reflecting a moderating effect dependent on work characteristic. We obtained the following results: First, membership turnover relates to collaboration efficiency in a right-shortened U-shaped manner, with a moderating effect from work characteristic; given the same turnover rate, the promotion likelihood for a more professional task is lower than that for a less professional task, and the likelihood difference diminishes as the turnover rate increases. Second, contribution period relates to collaboration efficiency in a left-shortened U-shaped manner, with a moderating effect from work characteristic; the marginal performance change per unit change of contribution period is greater for a less professional task. Third, the number of new participants per month relates to collaboration efficiency in a left-shortened reversed U-shaped manner, for which the moderating effect from work characteristic appears to be insignificant.

• Journal of Animal Environmental Science
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2002

This study was conducted to develope the new solid separating system which can be efficiently and economically removed the solid parts in high pollutants concentration of pig slurry. The pollutants concentration, BOD$_{5}$ , COD and SS of the slurry used in this study was 15,990($\pm$2,389)mg/l, 20,004($\pm$5,512)mg/l and 26,486($\pm$5,935)mg/l, respectively. After removal of solid part in slurry, the pollutants concentration, BOD$_{5}$, COD and SS was change into 5,617($\pm$690)mg/l, 5,553($\pm$633)mg/land 1,456($\pm$341)mg/l, respectively in the Fixed biological membrane tank. The reduction of the pollutants concentration of suspend liquid through membrane will be allowed to greatly improve the water purification by an Activated sludge method. This separating system consisted of a temporary storage, a circulating tank and a Fixed Biological membrane tank. A temporary storage which has a draining system of screw type and an aeration device played a tremendous role in draining the solid by filled an aeration of 0.3 l/min. A Fixed Biological membrane tank of which a styrofoam filled in a 2/3 volume as a Biological media was fixed by a stainless steel net (pore size : 0.5mm) to separate the liquid layer of influx in them. The separating system efficiency factors were the speed of screw motor, cycle number of slurries in a circulating tank and moisture contents of solid effluent through the screw path. Although the pollutants concentration was very variable in temporary storage, the final concentration of $BOD_5$ and SS, except COD of the suspended liquid in a Fixed biological membrane were not different regardless of cycle number of a circulating tank. Moisture contents of effluent from temporary storage was 73% under the speed 1 ppm of screw motor and 62% under the 1/4rpm of it.