• Journal of the Korean Geotechnical Society
• /
• v.39 no.8
• /
• pp.29-39
• /
• 2023

The degree of saturation determines the connectivity of void space and the particle surface. Thus, it greatly affects the electrical conductivity of soils. This study aimed to analyze the electrical conductivities of coarse grains with a high relevance of pore water conduction and fine grains with a high relevance of surface conduction based on the degree of saturation. It also aimed to express the electrical conductivity of unsaturated soils as a combination of surface and pore water conductions using the modified Archie's equation. Samples were prepared in a plastic cell equipped with four electrodes, and the electrical conductivity was measured based on the porosity at various degrees of saturation (40%~100%). The results demonstrate that Archie's equation can be used to express the electrical conductivity of coarse grains, with a saturation exponent of ~1.93 regardless of the pore water conductivity. However, the saturation exponent of fine grains varied considerably with pore water concentration. This variation can be attributed to the relative magnitude of surface conduction with respect to the electrical conductivity of soils at different pore water concentrations. Thus, the degree of saturation has varying effects on pore water conduction and surface conduction. Therefore, different saturation exponents must be used for pore water conduction and surface conduction to predict the electrical conductivity of unsaturated soils using the modified Archie's equation.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.43-53
• /
• 2012

This study deals with the conventional consolidation methods like preloading and vertical drains. For it, Two different mechanism, i.e., increasing of permeability and evaporating of pore water were studied. The marine clays excavated in Incheon were heated at low temperature($90^{\circ}C$) to increase the permeability. Also, Microwave oven and high-temperature electric heater were used for pore water evaporation. Several points raised from the experiments. To fix them, the electric heating system was revised to upgrade the field application and drain efficiency of pore water, and the marine clays were heated by revised electric heater at high temperature($250^{\circ}C$). From Experimental result showed that results, high-temperature heater induced the pore water evaporation and displayed the excellent consolidation behavior. In addition, the cone index of heated clays were increased about 19 times, which suggested that electric heating system could be applied for ensuring the trafficability of heavy equipments.

• KCID journal
• /
• v.5 no.2
• /
• pp.41-51
• /
• 1998

Spatial distributional patterns of temperature in the sediments and the concentration of nutrients in interstitial water were particular interests on the ecological research of tidal flats. It was the aim of this paper to grasp inhabiting environment of t

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.185-196
• /
• 1999

A laboratory experiment was performed to examine the relationship between resistivity and ionic components in the pore water of a sand by using soil resistivity test box and STING-Rl. The resistivity measurement was performed with the concentration changes of ionic components. Also, the resistivity change was evaluated for multiple components. The results showed that the resistivity of Arsenic was less than other heavy metals. In the case of complex components, resistivity ranges depended on the resistivity of components existed in the pore water.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.1
• /
• pp.41-50
• /
• 2004

The numerical investigation for the effects of blasting-induced vibration on adjacent dam and pore water pressure fluctuation was conducted through solid-water coupled analysis under dynamic loading. The stability of dam was examined by peak particle velocity of core. Pore water pressure distributions were calculated by steady state flow analysis using coupled analysis on ground water and blasting-induced vibration. The influence of pore water pressure and the effective stress distribution in the ground were also investigated. Furthermore, effective stress alteration was examined by applying Finn & Byrne Model to monitor the generation and dissipation of pore water pressure.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.712-720
• /
• 2008

Sediment and interstitial water samples from ten lagoons in the Northeastern coastal part of South Korea were analyzed to obtain the concentrations of metals and inorganic ligand. These data, coupled with pH and ionic strength, were used to compute the aqueous speciation of the metals in the interstitial water using the MINTEQA2 equilibrium program. The K and Na were almost entirely present as the free aqua ions, but Co, Cd, Ni, Pb and Zn were existed as various metal-ligand complexes. Metals such as Al, As, and Cr formed 3$\sim$4 metal-ligand complexes. In the interstitial water with high chloride concentrations, almost all of the metals were dominated by free aqua ions. Metals of Cd, Co, Ni, Pb and Zn were bound as chloride-metal complexes of the type M$^{x+}$ + xCl$^-$, and Fe, Mn and Mg were dominated by sulfate equilibria(M$^{2+}$ + SO$_4{^{2-}}$). Hg(II) was speciated as HgCl$_2$(aq), HgCl$_3{^-}$ and HgCl$_4{^-}$. However, in the interstitial water with low chloride concentrations, Hg(II) and Cd(II) were existed as chloride-metal complexes, metals of Cu, Mg, Mn, Ni, Pb and Zn were dominated by sulfate equilibria, and the speciation of Fe(II) was bound as Fe(OH)$_2{^+}$, Fe(OH)$_3$(aq). However, Al, As and Cr were dominated by hydroxy-metal and oxide-metal species in nearly all of the lagoons.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.401-412
• /
• 2016

It is extremely difficult to apply conventional grouting methods to subsea tunnelling construction in the high water pressure condition. In such a condition, the rapid artificial freezing method can be an alternative to grouting to form a watertight zone around freezing pipes. For a proper design of the artificial freezing method, the influence of salinity on the freezing process has to be considered. However, there are few domestic tunnel construction that adopted the artificial freezing method, and influential factors on the freezing of the soil are not clearly identified. In this paper, a series of laboratory experiments were performed to identify the physical characteristics of frozen soil. Thermal conductivity of the frozen and unfrozen soil samples was measured through the thermal sensor adopting transient hot-wire method. Moreover, a lab-scale freezing chamber was devised to simulate freezing process of silica sand with consideration of the salinity of pore-water. The temperature in the silica sand sample was measured during the freezing process to evaluate the effect of pore-water salinity on the frozen rate that is one of the key parameters in designing the artificial freezing method in subsea tunnelling. In case of unfrozen soil, the soil samples saturated with fresh water (salinity of 0%) and brine water (salinity of 3.5%) showed a similar value of thermal conductivity. However, the frozen soil sample saturated with brine water led to the thermal conductivity notably higher than that of fresh water, which corresponds to the fact that the freezing rate of brine water was greater than that of fresh water in the freezing chamber test.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.24-24
• /
• 2004

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.871-873
• /
• 2009

기존의 연직 배수공법은 통수능의 저하, 막힘현상(clogging) 등으로 인하여 연약지반의 압밀을 지연시키는 문제점을 가지고 있다. 이 연구에서는 고분자 압전소자인 PVDF(polyvinylidene fluoride)를 연직배수공법에 적용하여 연직배수공법의 기존 문제점을 극복하고 연약지반의 간극수를 빠르게 소산시킴으로서 압밀을 촉진 시킬 수 있을 것이라 판단되어 이에 따른 실내 실험을 수행하였다. 실험 결과 PVDF를 적용한 경우에서 그렇지 않은 경우보다 간극수의 배출량이 증가하여 PVDF의 적용으로 배수재의 성능이 향상됨을 알 수 있었다.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.309-320
• /
• 2003

Since the concrete covers most structures in modern architecture and it is composed of aggregates of about 75%, the appropriate selection of aggregates is valuable for the durability of concrete. A major cause of the expansion of mortar-bar measured by ASTM C 227-90 has been accounted by the alkali-aggregate reaction. This study carried out designed experiments on some aggregates including basalt and sandstone, to classify the expansion factors into the alkali-aggregate reaction, the increase of the gel pore volume, and the interstitial water that could expand physically the cracks or foliation developed in aggregates itself. The quantitative analyses of expansion by each factor indicated that the interstitial water and/or the alkali-aggregate reaction had major roles in the concrete expansion. Thus, if the supplied aggregates have deteriorated the structural framework, it is important to investigate the exact causes through this suggested method.