• KSBB Journal
• /
• v.19 no.4
• /
• pp.269-273
• /
• 2004

A simple, fast and reproducible quantitative analysis method for sugar concentration composed in oligosaccharide mixture was developed. Two glass TLC plates were prepared per sample. After dipping one plate into the copper bicinchoninate reagent and the other plate into 5% sulfuric acid solution, both plates were baked in microwave oven until sugar spots were developed or the surface temperature of TLC plate becomes 60 to 70 $^{\circ}C$. The corrective factor values [F value =(the value of total sugar concentration converted as glucose unit/the value of reducing sugar concentration converted as glucose unit)/(polymerization degree of sugar)] of different molecular weight sugars were determined. Within the concentration of 0.25∼1.0 $\mu\textrm{g}$ in each sample loaded, the fructose-F (corrective factor value of fructose) was 0.45, yet for the higher concentration (2.5∼7.5 $\mu\textrm{g}$) fructose-F was 1.0. In case of glucose, in the range of 0.5∼7.5 $\mu\textrm{g}$, glucose-F was same as fructose-F, 1.0. However, as the molecular weight of sugar was increased, the F values were decreased in both maltodextrin and isomaltodextrin oligosaccharides in 0.5∼7.5 $\mu\textrm{g}$ of each sample loaded. Interestingly, F values were equal for the same molecular weight sugars, although the structures were different from each other. Using F value of each sugar, we could determine and compare the exact total sugar concentration of different molecular weight maltooligosaccharide and isomaltooligosaccharide. We also could determine if the unknown sugar was a reducing or non-reducing compound by using optimized TLC with microwave oven method.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.411-419
• /
• 2004

When the imaging object rotates in image plane during MRI scan, its rotation causes phase error and non-uniform sampling to MRI signal. The model of the problem including phase error non-uniform sampling of MRI signal showed that the MRI signals corrupted by rotations about an arbitrary center and the origin in image plane are different in their phases. Therefore the following methods are presented to improve the quality of the MR image which includes the artifact. The first, assuming that the angle of 2-D rotational motion is already known and the position of 2-D rotational center is unknown, an algorithm to correct the artifact which is based on the phase correction is presented. The second, in case of 2-D rotational motion with unknown rotational center and unknown rotational angle, an algorithm is presented to correct the MRI artifact. At this case, the energy of an ideal MR image is minimum outside the boundary of the imaging object to estimate unknown motion parameters and the measured energy increases when the imaging object has an rotation. By using this property, an evaluation function is defined to estimate unknown values of rotational angle at each phase encoding step. Finally, the effectiveness of this presented techniques is shown by using a phantom image with simulated motion and a real image with 2-D translational shift and rotation.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2009

A waypoint tracking algorithm(WTA) is designed for Unmanned Surface Vehicle(USV) in which water-jet system is installed for propulsion To control the heading of USV for waypoint tracking, the steering nozzle of water-jet need, to be controlled. Firstly, target heading is calculated by using the position information of waypoints input from the land control center. Secondly, the command for the steering nozzle of water-jet is calculated in real time by using the heading and the rate-of-turn( ROT) from magnetic compass, In this study, in order to consider the drift angle due to external disturbance such as wind and wave, the course of ground( COG) can be used instead of heading at higher speed than a certain value, To test the performance of newly-designed WTA, the tests were carried out in actual sea area near Gwang-an bridge of Busan. In this paper, the sea trial test results from WTA are analyzed and compared with those from manual control and those from commercial controller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.453-454
• /
• 2018

AMOLED panels are being used instead of LCD panels. In addition, various process technologies for quality improvement are being studied. These studies require algorithms to perform aging correction and to extract aging correction values. In this paper, we propose a voltage setting algorithm for the aging correction of AMOLED. The voltage setting algorithm calculates and corrects the output voltage by calculating the correction value of the voltage setting. As a result, the required voltage can be supplied according to each channel in the embedded board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.197-204
• /
• 2012

We propose a new scheme combining the compensation of HPA nonlinearity and the calibration of the path imperfections in the downlink OFDM smart antenna systems. We use a two term third-order polynomial (without second-order term) and the feedforward method for compensation and calibration to make each path of the antenna array have equal characteristics. Since the proposed scheme does not alter the base-band signal, it can be applied to the smart antenna system independently of the base-band signal processing section. The result of computer simulations shows that, with the addition of only one third-order term, the adverse nonlinear effects can be effectively compensated, and the those of linear imperfections can be calibrated as well.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1395-1399
• /
• 2008

국내 토층 사면을 대상으로 강우에 의해 발생되는 침투수 거동 특성을 분석함으로써 지속적인 토층의 물성 변화 계측을 통해 산사태 예 경보시스템을 구축이 가능하다. 본 연구에서는 산사태 예 경보시스템 구축의 사전 단계로써, 국내 대표적인 지질 매질인 화강암 풍화토, 편마암 풍화토와 주문진 표준사에 대해 공극률과 체적함수비 등의 토질 물성 변화를 고려한 실내 보정실험을 수행하였다. 실험조건은 공극률, 체적함수비 변화에 대한 측정센서의 측정 정밀도 향상과 이를 통해 국내 현장토에 대한 고유 보정기법을 제시하기 위함이다. 측정센서는 각 실험 조건별 물성 변화에 따라 전압을 측정함으로써 현장토에 대한 물성치와 상호 분석이 가능하도록 하였다. 주문진 표준사 뿐만 아니라 국내 현장토인 화강암 풍화토와 편마암 풍화토에 대한 체적함수비에 대한 보정식도 함께 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.27-33
• /
• 2004

In this paper, we present a carrier recovery circuit using the polarity-decision algorithm that recovers a phase and a frequency error simultaneously. The proposed algorithm catches a frequency error based on a differential of an angular velocity of the signal constellations. Using the differential of a phase error may compensate the frequency error. The symbol prediction method in the proposed algorithm accumulates the symbols, which makes easy to calculate a phase differential. The hardware size of the algerian is small since we use Q data or I only to get phase information. As a result, the algerian shows a pull-in range of normalized frequency error 0.5 under AWGN 15dB.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.12-18
• /
• 2009

In this paper, we developed white balance correction processor for Full Color LED Display System which could be display uniformity color and soft light by adjusting brightness of red, green, blue pixel, individually. This processor correct brightness by calculating operating current of each pixel(red, green, blue LED) on the basis of characteristic curve of LED device when we named "a" as a specific characteristic value, "b" as a brightness correction value according to using time, "X" as a operating current value, and "Y" as brightness value. As the results, we solved the reduction problem of brightness for long used LED devices, according to increase entire mean of brightness value by adjusting "b" value from the brightness characteristic function.

• The Journal of Information Technology
• /
• v.5 no.1
• /
• pp.99-111
• /
• 2002

Due to non-linear characteristics of color spaces, color corrections using linear conversions for real image near color reappearance causes color distortions. In order to overcome this problem, the Bezier Curve, constructed with a set of arbitrary plane in the linear theory, has been used. However, the Bezier Curve increases in proportion to the number of data points, resulting in higher computational complexities. This paper attempts to use a Triplicated Piecewise Bezier Cubic-Curve (TPBC-Curve) of which the degree is cubic on the whole interval while keeping the characteristics of Bezier Curves. By Comparing the TPBC-Curve with Bezier Curve of 20 degree, the paper not only reduces the distortion during color correction but also lessens the relative increase of workload that is caused by the color correction in a small zone.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.151-159
• /
• 1992

In close-range photogrammetry, to employ non-metric camera especially for the purpose of precise measurement, systematic errors must, first of all, be corrected as they have a great influence on accuracies of results. For it, fiducial marks was built in non-metric camera and the factors such as PPS, PPA, EFL, CFL, and radial lens distortion coefficients for each quadrant were calibrated through collimator test. Also, the coefficients of both radial and tangential lens distortion were calibrated from analytical plumb line method and therefore main systematic errors could be effectively corrected. Using the calibrated non-metric camera, close-range photogrammetry could be successfully accomplished and accuracies could be improved sharply.