• Title/Summary/Keyword: 각도변화

Search Result 1,407, Processing Time 0.026 seconds

배면 유기 발광 소자의 각도에 따른 발광 패턴

  • Mok, Rang-Gyun;Ju, Hyeon-U;Han, Won-Geun;Song, Min-Jong;Kim, Tae-Wan
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.195-196
    • /
    • 2009
  • 각도에 따른 배면 유기 발광 소자의 발광 패턴에 대해서 연구하였다. 소자 내에서 발광한 빛은 등방성으로 퍼져 나가고 굴절률이 n인 매질과 공기의 계면에서 굴절하게 된다. 소자 내에서 굴절되어 퍼져 나온 빛의 각도에 따른 빛의 세기를 측정하였다. 또한 배면 유기 발광 소자에서의 시야각을 $10^{\circ},\;20^{\circ},\;30^{\circ},\;40^{\circ},\;50^{\circ},\;6^{\circ}$로 변화시켜 각도에 따른 발광 패턴을 알 수 있었다. 소자 내에서 발광한 빛이 소자 밖으로 퍼져 나올 때의 발광 패턴을 편광판을 이용하여 $0^{\circ}$$90^{\circ}$로 변화시켜 실험하였다. 소자의 구조는 ITO(170nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(100nm)으로 하고, 유기물층과 음전극은 $2{\times}10^{-5}$Torr에서 증착하였다. 유기물의 증착 조건은 $2{\times}10^{-5}$torr의 진공도에서 $1.5{\sim}2.0{\AA}/s$ 속도로 열 증착하였다. 전극의 증착 조건은 $2{\times}10^{-5}$torr의 진공도에서 $1.5{\sim}2.0{\AA}/s$ 속도로 열 증착하였다. 발광 면적은 $3mm{\times}5mm$이다. 소자의 각도에 따른 발광 스펙트럼 측정은 USB-2000을 사용하였다. 소자 밖으로 나오는 편광되어진 빛을 측정하기 위하여 편광판을 사용하여 측정하였다.

  • PDF

Analysis of Vocabulary Relations by Dimensional Reduction for Word Vectors Visualization (차원감소 단어벡터 시각화를 통한 어휘별 관계 분석)

  • Ko, Kwang-Ho;Paik, Juryon
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2022.01a
    • /
    • pp.13-16
    • /
    • 2022
  • LSTM과 같은 딥러닝 기법을 이용해 언어모델을 얻는 과정에서 일종의 부산물로 학습 대상인 말뭉치를 구성하는 어휘의 단어벡터를 얻을 수 있다. 단어벡터의 차원을 2차원으로 감소시킨 후 이를 평면에 도시하면 대상 문장/문서의 핵심 어휘 사이의 상대적인 거리와 각도 등을 직관적으로 확인할 수 있다. 본 연구에서는 기형도의 시(詩)을 중심으로 특정 작품을 선정한 후 시를 구성하는 핵심 어휘들의 차원 감소된 단어벡터를 2D 평면에 도시하여, 단어벡터를 얻기 위한 텍스트 전처리 방식에 따라 그 거리/각도가 달라지는 양상을 분석해 보았다. 어휘 사이의 거리에 의해 군집/분류의 결과가 달라질 수 있고, 각도에 의해 유사도/유추 연산의 결과가 달라질 수 있으므로, 평면상에서 핵심 어휘들의 상대적인 거리/각도의 직관적 확인을 통해 군집/분류작업과 유사도 추천/유추 등의 작업 결과의 양상 변화를 확인할 수 있었다. 이상의 결과를 통해, 영화 추천/리뷰나 문학작품과 같이 단어 하나하나의 배치에 따라 그 분위기와 정동이 달라지는 분야의 경우 텍스트 전처리에 따른 거리/각도 변화를 미리 직관적으로 확인한다면 분류/유사도 추천과 같은 작업을 좀 더 정밀하게 수행할 수 있을 것으로 판단된다.

  • PDF

Numerical Analysis of Flow Fields for Optimum Design of Vehicle Vacuum Pump with Multivanes (자동차용 진공펌프 멀티 베인의 최적 설계를 위한 유동장 수치해석)

  • Lim, Tae-Eun;Lee, Kye-Bock
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.9
    • /
    • pp.883-890
    • /
    • 2011
  • A numerical study was conducted to determine the optimal design for a vehicle vacuum pump. The degree of vacuum was examined for different design factors such as the angle of vanes, number of vanes, angle and position of the pump inlet-outlet pipe, and angular rotational speed of vanes. The results show that there is a little difference in the degree of vacuum when the angle of vanes are changed, but an angular change in the outlet pipe reduces the pump loss. As the rotational speed is increased, the mass flow rate increases, but a high rotational speed does not result in the maximum degree of vacuum. In addition, when the number of vanes is increased, the scattering range of mass flow rate decreases and pressure drop is abated.

Usefulness Evaluation of Merchant Auxiliary Equipment of Body Type Changing Suitable for X-ray Table Integral Type (체형변화에 적합한 X-선 검사대 일체형 Merchant 보조장비의 유용성 평가)

  • Seoung, Youl-Hun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.6
    • /
    • pp.2773-2779
    • /
    • 2013
  • The purpose of this study was to evaluate of the usefulness and to develop new auxiliary equipment that can bending angle of the bone of the knee various depending on the thickness of the thigh of the human. The subjects agreed for research purposes and were selected from normal person who do not have past knee-related diseases and grouped thin group A and thick group B for the thigh. We set in order to obtain images in the axial direction of the bones of the knee, $35^{\circ}$ to increase by $5^{\circ}$ angle of knee flexion, $45^{\circ}$, to $55^{\circ}$, and we performed combinations of 9 tests by incident angle X-ray per each angle, $40^{\circ}$, $50^{\circ}$ and $60^{\circ}$. As a result, we have developed an Merchant auxillary equipment of X-ray table integral type in radiographic images which was easy to use and could take images of various integral knee joint angles adjusting different body types. Using the auxiliary equipment, in the case of X-ray incident angle $50^{\circ}$ and $60^{\circ}$ with the knee flexion angle of $40^{\circ}$ in group A, and in group B, Knee flexion angle of $45^{\circ}$ and $35^{\circ}$, the X-ray incident angle at $60^{\circ}$, excellent images were derived. Future, it would be very useful in the examination of patients with a variety of body types.

Development of Mounting Device for Multi Aerial Sensor (항공용 멀티센서 고정 장치 개발)

  • Shin, Jin-Soo;Seol, Il-Hwan;Won, Jong-Hyeon
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2009.04a
    • /
    • pp.321-322
    • /
    • 2009
  • 항공기에 장착되어 1개 지점을 수직 및 경사각도로 5면에서 촬영하는 항공용 다각촬영 카메라를 비롯한 항공용 멀티센서는 항공기라는 공간상의 제약으로 인해 다양한 각도로 센서를 고정하기에 어려움이 있다. 또한 항공기 운항 중 기류변화등으로 인해 촬영예상 지역을 벗어나 촬영되기 쉽다. 이에 항공용 센서의 자세를 연직방향으로 유지 시켜주는 기존 항공용 마운트를 활용할 수 있으면서, 다양한 각도로 센서를 고정할 수 있는 장치를 개발하였다.

  • PDF

Anisotropic Behavior of Decomposed Granite Soils (화강풍화토의 비등방성 거동특성)

  • Ahn Tae-Bong;Jung Chan-Mook;Jin Han-Gyu;Hoh Jae-Ho
    • Proceedings of the KSR Conference
    • /
    • 2005.05a
    • /
    • pp.604-609
    • /
    • 2005
  • 화강풍화토의 강도와 변형특성을 조사하기 위하여 불포화배수 삼축압축시험을 실시하였다. 0, 45, 90 이차압축시의 변형거동에 관한 시간의존성은 다짐각도와 관계가 없는 것으로 판단되었다. 다짐각도가 압축강도와 변형에 미치는 영향은 특히 낮은 구속압력시에 크다. 다짐각도가 다르다 하더라도 다일러턴시 비율은 다일러턴시로 인한 강도증가와 상관하여 변화한다. 따라서 다짐풍화토는 초기 비등방성 조직을 갖고 있는 모레와 같이 비등방성 역학적 성질을 갖는다고 할 수 있다.

  • PDF

Comparison of Exposure dose according to the C-arm Angle Change (C-arm 각도 변화에 따른 피폭선량 비교)

  • Shin, Seong-Gyu
    • The Journal of the Korea Contents Association
    • /
    • v.11 no.9
    • /
    • pp.453-458
    • /
    • 2011
  • This study aimed to figure out the change of exposure dose to the radiologist according to the C-arm angle change. For the exam it was fixed with 101 kvp and 4.9mA for the exposure time with 3 seconds and 5 seconds respectively. C-arm Tube was located both under and over, then the average was taken after performing for 5 times with the change of angle from -30 degree to 0, 30, 60 and 90 degree. The detector measured in 160cm high from the position of the radiologist who operates the C-arm. The measurement was shown its highest result at -30 degree followed by 0, 30, 60, 90 from the highest order. Over tube method is higher than under tube method. Therefore, to reduce the exposure dose of the radiologist, it is required for using under tube method instead of over tube method. When the angle change is made, it is recommended to use the angle that tube is growing further apart from the radiologist. And it is also necessary to shorten exposed time as much as possible to create the same quality image and also to reduce the exposure dose.

The change of muscle thickness in accordance with angle of shoulder joint and hip joint at the Quadrupedal position (네발기기자세에서 어깨관절과 엉덩관절의 각도 변화에 따른 근 두께 변화)

  • Han, Jong-Man;Kim, Keum-Sook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.2
    • /
    • pp.934-939
    • /
    • 2014
  • The purpose of this study unit a Quadrupedal position of limbs due to changes in the thickness of the trunk muscles to find out, by comparing the difference in muscle activity fours spinal stabilization devices do you need to choose an effective stance is to provide the data. The subjects C # 29 University students healthy adults were recruited. The Rectus abdominis muscle and the transversus abdominis and internal oblique abdominal muscle, external oblique abdominal muscle should be measured. The results of this study Lt. IO, EO, TrA, Rt. TrA, Muscle showed significant differences among the positions. The study reveals that the exercises in Quadrupedal position can activate trunk muscles and the degrees of muscle activities can vary according to the angle.

Rotation-invariant Object Categorization using Bag-of-features with Angular Pyramid (각도 피라미드를 이용한 Bag-of-features 를 통한 회전에 강한 물체 인식)

  • Kwon, Bojun;Kim, Seona;Lee, Kyong Joon;Yun, Il Dong;Lee, Sang Uk
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2011.07a
    • /
    • pp.449-450
    • /
    • 2011
  • 본 논문에서는 영상에서의 물체 인식에 주로 사용되었던 공간 피라미드를 변형시킨 각도 피라미드를 이용한 bag-of-features 방법으로 회전 변화에도 강한 물체 인식에도 적용할 수 있도록 한다. 기존의 공간 피라미드에서 수직의 격자 모양으로 영상을 나누었던 것에 비해 각도 피라미드는 영상의 중심을 기준으로 동일한 각도로 영상을 분할하여 피라미드로 만든다. 각 영역 안에서 특징들의 히스토그램으로 영상을 표현하고 영상간의 유사도는 각도 피라미드를 단계별로 순환적 자리옮김을 통해 회전시켜가며 히스토그램 교집합을 구하여 측정한다. 이 방법을 Caltech-101 데이터베이스에 적용해본 결과 회전 변환을 준 테스트 영상에 대해 기존의 공간 피라미드를 사용한 방법에 비해 높은 성능을 보이는 것을 확인하였다. 따라서 이 방법을 통하여 다양한 상황의 일반적인 물체 분류할 수 있을 것으로 기대한다.

  • PDF

A Study on SAR Variation by EMI Paint Distribution and Folding Angle for Mobile Handsets (EMI 도료 패턴과 폴딩 각도에 따른 휴대폰의 SAR 변화에 관한 연구)

  • Yang, Woon-Geun;Lee, Won-Kew;Son, Ji-Myoung
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.16 no.9 s.100
    • /
    • pp.903-908
    • /
    • 2005
  • In this paper, in order to consider SAR(Specific Absorption Rate) problem at the beginning stage of a handset development, we investigated the Shh value change by using simulation method according to various EMI(Electromagnetic Interference) paint patterns on front case of a handset and folding angles. First, we made some experiments with EMI paint pattern on front case of a handset, and obtained results showed that different patterns of EMI paint had different SAR values. Among the simulation results on SAR value according to EMI paint patterns, the hairpin pattern showed the best performance, i.e. the decrease efficiency of $8.04\%$ and completely removed pattern showed the decrease efficiency of $5.94\%$. Orignal pattern was set as the reference and the folding angle was $150^{\circ}$. Second, simulation was carried out with changing folding angle from $150^{\circ}$ to $140^{\circ}$ and $160^{\circ}$. Simulation results for the modeled handset showed that SAR value was decreased with increasing the folding angle. When the folding angle was $160^{\circ}$ and with original pattern, we got the SAR value of about 1,61 W/kg. When we applied hairpin pattern with the folding angle of $160^{\circ}$, we got the lowest SAR value of about 1.45 W/kg.