• The Journal of the Korean dental association
• /
• v.57 no.7
• /
• pp.403-411
• /
• 2019

A cracked tooth is defined as an incomplete fracture initiated from the crown and extending subgingivally and usually directed mesiodistally. Cracked teeth were most frequently involved in mandibular and maxillary molars at the age of 50s. Cracks occurred mainly in nonbonded restorations such as gold and amalgam, and majority of cracks were found in intact teeth. A pulpal and periapical diagnosis is dependent on the extent of the crack and duration of the symptom. The pulp of a cracked tooth might become inflamed because of microleakage, which induces thermal sensitivity. Once the crack has extended and exposed the pulp, severe pulp and periapical pathosis will likely be present. In addition, the extended crack can cause a bony dehiscence with a resulting narrow and deep periodontal pocket. Therefore, early diagnosis of the cracked tooth and proper treatment planning are important for clinician.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.1
• /
• pp.52-64
• /
• 2023

This study aimed to examine the types and characteristics of otorhinolaryngology examinations performed by clinical laboratory technologists and to investigate the working environment and scope of work of otorhinolaryngology laboratory personnel using online questionnaires. Based on the research results, constructive policy measures for the University-Association-Society were also presented. Most of the survey respondents were in their 40s (34.1%). Females accounted for 80.2% of respondents and 30.8% of them had a career spanning 15 years or more. We found that laboratory personnel had a wide scope of work, high work stress and frequently suffered occupational diseases. We observed that, to reduce stress and increase satisfaction, an expansion of the workforce was necessary. Compared to other occupations, 72% of clinical laboratory technologists occupied more senior positions, occupational distribution depended on senior positions (P<0.001). Clinical laboratory technologists performed about 26 types of otorhinolaryngology examinations. The most frequent test performed daily was pure tone audiometry, and polysomnography took the longest test time, with an average of 8 hours. In conclusion, clinical laboratory technologists were in charge of various specialized otorhinolaryngology examinations. Considering the importance of clinical laboratory technologists in otorhinolaryngology, the University-Association-Society should put in additional effort into nurturing otorhinolaryngology examination experts.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.322-335
• /
• 2019

Objectives: The goal of this study is to standardize industry, process, and job within work environment measurement information. Methods: We selected 180 work environment measurement reports on 30 industries from a database monitored from 2014 to 2016 by the Korea Industrial Health Association. Ten industrial hygienists, each with over five years of experience in measurement, conducted a primary standardization of 180 reports. Two professional industrial hygienists with more than 20 years of experience each reviewed and revised the results of the primary standardization. We also examined the validity on the usefulness of the standardized database by the two industrial hygienists. Results: The final standardization results were classified into eight major categories, 23 sub-major categories, 39 minor categories, 53 unit categories and 70 sub-unit categories in the Korean Standard Industrial Classification (KSIC) 10th revision. A total of 161 processes were standardized, and there were 148 processes with K2B codes. Standard job was coded into 13 job groups including operator, automobile maintenance, nurse, maintenance, manager, excavating machine operator, forklift driver, radiologist, clinical pathologist, signer, researcher, kitchen assistant, and concrete reinforcement ironworker. Conclusions: Although the standardized information in this study may be only a part of the total information, it can be useful for improvement of the K2B system. Additional research is needed for an ongoing clean-up of data in the K2B and re-calibration and reclassification of standard processes until the future national exposure monitoring system is fully established.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.41-47
• /
• 2021

Purpose There are many cyclotrons compared to the land area of the Republic of Korea. Because GMP certification is required and the nuclear medicine test does not apply for insurance, the number of examinations for nuclear medicine is decreasing. Therefore, there is a high probability of early decommissioning of the cyclotron. However, we do not unusually perform the radioactivation evaluation on concrete that can be classified as radioactive waste during the decommissioning of the cyclotron. In this study, we aim to confirm the radioactivation in the concrete surface using Handheld Radionuclide Identification Devices (RIDs). Materials and Methods Because there is no cyclotron being decommissioning in the Republic of Korea, it was impossible to perform the coring of concrete for radioactivation analysis. In this study, we used the KIRAMS-13 and analyzed the concrete surface in the target direction in the cyclotron room. After setting the target direction as the center, radionuclides were measured for about five months at thirty points with vertical and horizontal intervals of 30 cm. We used the RIIDEye(Detector: NaI(Tl) detector, manufacturer: Thermo) in this study and set the measurement time per point to one day (24 hours). Results Co-60 and Cs-137 were detected in some measurement points, and we confirmed the radioactivity of Co-60 detected at the most points. As a result, we found that the radioactivity of Co-60 was high in the diagonal direction (from the lower-left direction to the upper right direction) based on the center of the target. However, we think it is impossible to apply the corresponding results to all cyclotrons because we performed the study using only one cyclotron. Conclusion In thirty measurement points, we could confirm the radioactive nuclides and the relative radioactivity using the results of portable nuclides analyzer. Therefore, we expect that we can use the portable nuclides analyzer to select the coring position of concrete during the decommissioning of the cyclotron. Also, if we secure the radioactivation data for several years, we expect to make a more accurate estimate of radioactive waste during the preparation period of decommissioning of the cyclotron.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.40-49
• /
• 2023

Objectives: The handling of carcinogenic, mutagenic or reproductive toxic (CMR) materials in paint-related products used by automobile maintenance companies in Busan was investigated and its characteristics were analyzed. Methods: MSDS for paint-related chemical products used by automobile repair companies in Busan were collected and the manufacturers, product uses, names of chemical substances in each component, CAS numbers, content, and more were listed. Results: As a result of collecting MSDS on 4,800 kinds of products handled in the painting process of automobile repair companies in Busan and comparing them with the latest toxic information database, 60 out of a total of 438 substances were found as CMR materials. Seven carcinogens (1A), including quartz, benzene, formaldehyde, and hexavalent chromium, were present. Two reproductive toxic 1A substances were included: hexavalent chromium in paint pigments and lead. Conclusions: Most of the products (95.5%) were found to contain at least of one CMR component, so it was judged that a study on exposure assessment of CMR substances by automobile maintenance workers is needed in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.206-214
• /
• 2023

Objectives: To determine the effect of the various type and number of shift work on sociopsychological stress in the university hospital nurses in Seoul, South Korea. Methods: Data was collected through a self-administered questionnaire that included general characteristics, the type and number of shift work in the past 4 weeks and the an sociopsychological stress based on PWI-SF. Logistic regression analysis was conducted to analyze the effect of shift work by types on sociopsychological stress of university hospital nurses using SAS 9.4 and it adjusted general characteristics by the additional models. Results: When the number of night shift work 3 or 4 compared to 0, sociopsychological stress was significantly high(OR=2.16, 95% CI=1.29-3.65). When 5 or more, it was higher(OR=2.39, 95% CI=1.55-3.72). Two continuous night shift work compared to 0 increased sociopsychological stress(OR=2.37, 95% CI=1.49-3.81) and 3 or more even more(OR=2.70, 95% CI=1.72-4.27). If the shift work type changes 14 or 15 times compare to below 11, sociopsychological stress is increased and even higher when 15 or more times but it's not significant after adjusting for covariates. Conclusions: It suggests that workplace with nurse expose to shift work should be on lookout for more than three night shift work, more than two continuous night shift work and more than 14 shift work change which can lead to burnout, absenteeism, depression and decreased productivity.

• Journal of the Health Care and Life Science
• /
• v.9 no.1
• /
• pp.117-128
• /
• 2021

This study was performed to investigate health care system satisfaction and reform need using the data from the '2019 Health Care Experience Survey'. For 8,349 data with experience in medical use, health care system satisfaction and reform need level was analyzed by t-testing and ANOVA by characteristics of the study subjects, and multiple regression was conducted. Research has shown that health care users' recognition of the health care system is relatively low compared to reliability and satisfaction. It is necessary to promote policies and health care systems for senior citizens, low education levels. Since the reliability has the biggest impact on the satisfaction of the health care system, government should establish policies that they can trust, and in the process, they should gather opinions from the public and secure credibility through social consensus. Medical users were sympathetic to the need for reforms in the health care system, and felt the need to support vulnerable areas and vulnerable groups the most.