• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.418-421
• /
• 2005

Three-dimensional (3D) microfabrication process using two-photon polymerization (TPP) is developed to fabricate the curved microstructures in a layer, which can be applied potentially to optical MEMS, nano/micro-devices, etc. A 3D curved structure can be expressed using the same height-contours that are defined by symbolic colors which consist of 14 colors. Then, the designed bitmap figure is transformed into a multi-exposure voxel matrix (MVM). In this work a multi-exposure voxel matrix scanning method is used to generate various heights of voxels according to each laser exposure time that is assigned to the symbolic colors. An objective lens with a numerical aperture of 1.25 is employed to enlarge the variation of a voxel height in the range of 1.2 to 6.4 um which can be controlled easily using the various exposure time. Though this work some 3D curved micro-shapes are fabricated directly to demonstrate the usefulness of the process without a laminating process that is generally required in a micro-stereolithography process.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.249-254
• /
• 2009

In our study, the Hanle spectrum and nonlinear magneto-optic effect (NMOE) signals were observed as a function of magnetic field on $D_1$ line of $^{87}Rb$ atoms contained in a paraffin coated vapor cell. We observed the double structure from the Hanle and the NMOE spectrum in the paraffin coated Rb vapor cell. The narrow spectral width of the narrow resonance signal is approximately 1 kHz and the magnitude is approximately 10 percent of the total spectrum. Also, the NMOE signals corresponding to the Hanle configuration consisted of two different dispersion-like features. At the near zero magnetic field, a sharp slope signal was centered, and its value was 10 mV/${\mu}T$ with laser power was $200{\mu}W$.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.965-982
• /
• 2011

Currently, dependency of natural and energy resources on world economy may not be more serious than any before increasing the uncertainty of Korea's national economy, especially as China uses unexpectedly fast glowing portion of world resources. Due to insufficient natural resources and unmatured renewable energy system, it is very important for Korea to secure the energy sources not only for national prosperity but also security for the future. In this regard, importance and necessity of nuclear energy as a major electric power source in Korea are in need to be emphasized. Korea currently imports all the necessary enriched uranium for fabrication of nuclear fuel from abroad. Thus, it is extremely important to establish a secured supply system for enriched uranium regardless of the global political unstability as well as economic fluctuation. In order to build the nuclear fuel procurement system, it is required to analyze the global market status, current enrichment service systems, and the future technology under development. For this purpose, this study comparatively analyzes the laser based advanced technology for uranium enrichment under development in the United States, which is assumed to be 2~3 times more economically viable than currently available technologies.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.323-332
• /
• 2007

The effect of the reflectivity of both facets and the phase of a phase tuning section on the self-pulsation (SP) characteristics of multisection complex-coupled (CC) DFB lasers is investigated in terms of yield. The lasers are composed of two CC DFB sections and a phase tuning section between them. As the coupling strength and the coupling ratio (CR) decrease, the effect of the reflected fields from both facets and the other DFB section on the mode characteristics of one DFB section increases, so that the yield decreases. As the facet reflectivity increases, the maximum yield and the range of the phase of a phase tuning section with yield more than 60% decrease independent of the coupling strength and CR. The yield characteristics of CR=0.2 are better than those of CR=0.1 with the same coupling strength due to the larger complex coupling effect. The case with ${\mid}{\kappa}L{\mid}=3$ and CR=0.2 shows best yield characteristics among the cases considered in this work.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.133-141
• /
• 2009

Study on the chemical speciation of uranium(VI) species, ${UO_2}^{2+}$, $UO_2(OH)^+$, ${(UO_2)}_2{(OH)_2}^{2+}$, ${(UO_2)}_3{(OH)_5}^+$, has been peformed by using time-resolved laser-induced fluorescence spectroscopy. Speciation sensitivity which depends on the excitation wavelength was investigated. We obtained the speciation sensitivity in the order of $10^{-9}$ M concentration of U(VI) compounds at the excitation wavelength of 266 nm. The fluorescence spectrum and lifetime of ${UO_2}^{2+}$ were carefully measured at pH 1 and ion strength of 0.1 M. The spectrum showed the four characteristic peaks located around 488, 509, 533, 559nm and the fluorescence lifetime of $1.92{\pm}0.17{\mu}s$. The wavelength shifts of fluorescence peaks and the change of lifetimes for uranium hydrolysis compounds were compared with those of ${UO_2}^{2+}$. We report on the characteristic features, the shifts of peaks to the longer wavelength direction and the prolonged lifetimes, in the fluorescence of the U(VI) hydrolysis compounds.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.3
• /
• pp.265-273
• /
• 2019

This study was performed to evaluate clinical use of laser fluorescence (LF) to identify early childhood caries lesions suitable for applying resin infiltration. 20 exfoliated primary molars with proximal caries were selected and cut buccolingually cross the central pit for regarding the mesial and distal surfaces respectively. 27 specimens corresponding to ICDAS code 1 and 2 were selected and the LF values were measured. When infiltrant resin was applied, double staining for microscopy detection has done simultaneously. Tooth samples were sliced with 0.7 mm thick. The maximum lesion depth, maximum penetration depth, and average penetration rate were measured from the confocal scanning laser microscope image. Pearson correlation analysis was performed. The intraclass correlation coefficient of LF values shows excellent agreement. LF values had positive correlation with penetration rate, but not lesion depth and penetration depth. Significant correlation between LF readings and penetration rate was verified in deep enamel caries and dentin caries except shallow enamel caries. Infiltrant resin could penetrate with a higher rate and LF values could be increased in more active caries lesions. In assessing radiologically similar caries lesion, laser fluorescence might be useful for identifying caries activity.

• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.158-164
• /
• 2019

Recently many studies to reduce the noise of dental hand piece which generate inevitably mechanical sound to offend to the ear of a patient have been spotlighted. Generally, methods of adding a sound absorbing material inside the exhaust valve, air pump of machine or automobile are widely reported as optimal way to reduce the mechanical noise. In this paper we studied a new UV laser aided manufacturing of micro-porous structure of EPP substrate and applied dental hand piece to improve the efficiency of sound absorption. A lot of micro-sized pores were fabricated with UV laser processing on the surface of sliced EPP substrate. From fundamental experiments, more high-performance of micro-porous EPP substrate has finally demonstrated for sound-absorbing structure of the micro muffler inside dental hand piece, which actually has the excellent potential to apply a lot of potable machine.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2021

We have studied a tiled-aperture coherent-beam-combining system based on constructive interference, as a way to overcome the power limitation of a single laser. A 1-watt-level, 3-channel coherent fiber laser and a 3-channel fiber array of triangular tiling with tip-tilt function were developed. A monitoring system, phase controller, and 3-channel phase modulator formed a closed-loop control system, and the SPGD algorithm was applied. Eventually, phase-locking with a rate of 5-67 kHz and peak-intensity efficiency comparable to the ideal case of 53.3% was successfully realized. We were able to develop the essential elements for a tiled-aperture coherent-beam-combining system that had the potential for highest output power without any beam-combining components, and a multichannel coherent-beam-combining system with higher output power and high speed is anticipated in the future.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.24-30
• /
• 2010

Space solar sails are a form of spacecraft propulsion using the radiation pressure of light from a star or laser to push enormous ultra-thin mirrors to high speeds. With respect to it, U.S.A, Japan, E.U. and Russia, etc. have performed a substantial research and the space flight test. On May 2010, JAXA succeeded in launching the world's first interplanetary solar sail spacecraft "IKAROS" to Venus. Currently, solar sail propulsion is aimed chiefly at accomplishing a number of non-crewed missions in any part of the solar system and beyond. This paper presents the technology trend of advanced countries on the development of the solar sails as a new propulsion method for the space investigation and travel.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2160-2170
• /
• 1991

Three-dimensional turbulent structures in the near field of elliptic jet were experimentally investigated by using a three-color, three-component Laser Doppler Velocimeter. The Reynolds number based on the nozzle exit velocity and nozzle equivalent diameter(De) was about 4*10$^{4}$. The turbulent characteristics of a sharp-edged elliptic nozzle with aspect ratio of 2 were analyzed along major and minor axis at X/De=2,3,5,7 and along the centerline up to X/De=14. Quantities measured at each point with the 3-D LDV system were three orthogonal velocity components, turbulent intensity, skewness, flatness, and Reynolds shear stress. The nondimensional mean velocities coincided well with the Schlichting's empirical curve with going downstream. Elliptic jet of AR=2 had two switching points at about X/De=2 and 16. The turbulent intensity along the minor axis was distributed widely than that along the major axis. In the near field, X/De<5, the Reynolds shear stresses of the inner part of the elliptic jet had negative value, which indicated the enhancement of entrainment toward the inner part.