• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.29-32
• /
• 2000

본 논문에서는 미지의 반송파주파수를 가진 협대역 신호의 존재를 광대역에서 검출하는 문제를 고려하였다. DFT 전력 스펙트럼을 평균화하여 주파수 영역에서 Neyman-Pearson criterion을 사용하여 신호를 검출하는 방법을 사용하였다. 평균화된 DFT 스펙트럼의 통계적 특성과 검출 threshold 및 검출 확률을 분석하여 보았다.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.193-199
• /
• 2011

In this paper, we proposed battery driven low power algorithm in mobile device. Algorithm the mobile devices in power of the battery for the task to perform power consumption to reduce the frequency alters. Power of the battery perform to a task power consumption of is less than the task perform to frequency the lower. Frequency control the task, depending on in the entire system devices used among the highest frequency with devices first target perform to. Frequency in the decrease the second largest frequency with of the device the frequency in changes the power consumption to calculate. The calculated consumption power the battery of level is greater than level the frequency by adjusting power consumption, lower power of the battery the task perform when you can to the frequency to adjust. Experiment the frequency by adjusting power consumption a method to reduce using [6] and in the same environment power of the battery consider the task to perform frequency were controlled. The results in [6] perform does not battery power on task operates that the result was.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.281-288
• /
• 2002

This paper has realized a control system of a vibrator using PM excited Transverse Flux Linear Motor(TFLM). Proposed vibrator can supply a vibration force up to 700[N] at rated current, wide operation range of vibration displacement and high frequency for a tested structure. Also, volume of a vibrator system can be decreased because of a high trust force rato(a thrust force per weight=N/Kg). A proposed vibrator instead of a hydraulic vibrator can improve efficiency and have may advantages of maintenance and management. A desired value command is a vibration frequency and displacement in a controller for a vibrator system and a controlled values we a instant position and velocity of a mover Output value of the controller is phase current controlled by PWM converter. In this research, Dynamic simulation has been executed for analysis of a control algorithm and dvnauuc characteristics and is compared with experimental result.

• Journal of KSNVE
• /
• v.13 no.3
• /
• pp.162-176
• /
• 2003

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2B
• /
• pp.151-159
• /
• 2002

Frequency synthesizer is an essential part for developing high speed frequency hopping radio. A high speed synthesizer using DDS driven PLL technique is designed and implemented for a X-band portable satellite terminal. It generates transmitter and receiver frequency ranging 6600∼7100MHz and 6140∼6640MHz, respectively by using 102.4MHz local oscillator, Its lock time is below 15 $\mu$sec and Its phase noise is below -754dBc at 1KHz offset Sequency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.76-81
• /
• 2013

A new phase frequency detector based digital phase-locked loop (PLL) of 125 MHz was designed using the 130 nm CMOS technology library consisting of inverting edge detectors along with a typical digital phase-locked loop to reduce the lock time and jitter for mid-frequency applications. XOR based inverting edge detectors were used to obtain a transition earlier than the reference signal to change the output more quickly. The HSPICE simulator was used in a Cadence environment for simulation. The performance of the digital phase-locked loops with the proposed phase frequency detector was compared with that of conventional phase frequency detector. The PLL with the proposed detector took $0.304{\mu}s$ to lock with a maximum jitter of approximately 0.1142 ns, whereas the conventional PLL took a minimum of $2.144{\mu}s$ to lock with a maximum jitter of approximately 0.1245 ns.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.79-87
• /
• 2002

Acoustic responses to pressure oscillations in axisymmetric combustion chamber are numerically investigated to examine the qualitative trend of acoustic instability in liquid rocket engine. Chamber operating condition and excitation frequency of oscillating pressure are selected as exciting parameters of acoustic instability. Artificial perturbation is simulated by total-pressure oscillation with sine wave at chamber inlet. Many approximations and simplifications are introduced without losing the essence of acoustic pressure response. First, steady-state solution for each operating condition is obtained and next, transient analysis is conducted. Depending on operating condition and excitation frequency, the distinct response characteristics are brought. Weak-strength flames and high-frequency excitation tend to cause sensitive acoustic pressure response leading to unstable pressure field. These results are analyzed based on the correlation with acoustic pressure responses from the previous works adopting laminar flamelet model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.169-174
• /
• 2011

For a double-walled carbon nanotube resonator with a short outer nanotube, the free edge of the short outer wall plays an important role in the vibration of the long inner nanotube. For a double-walled carbon nanotube resonator with a short inner nanotube, the short inner nanotube can be considered as a flexible core, thus, the fundamental frequency is influenced by its length. In this paper, we analysis frequency variation in ultrahigh frequency nanomechanical resonators based on double-walled carbon nanotubes with different wall length. This results will widely apply to the realization of frequency devices controlling the length of the inner or outer nanotube.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1085-1091
• /
• 2001

이 논문에서는 주기적인 특성을 가진 펄스 열들이 서로 다른 초기 위상을 가지고 수신기에 입력되었을 때 도래시간 차이를 이용하여 펄스 열을 분리하는 방법을 제시하고자 한다. 주기적인 펄스 열을 주파수 관점에서 고찰해 보면 하나의 펄스 열 주파수 값으로 특성 지울 수 있으며 이러한 성질은 다중의 펄스 열이 포함된 신호 환경 하에서도 동일하게 나타난다. 제안된 기법은 기존의 스펙트럼 영역에서 사용된 신호 도래 시간의 지수함수로의 매핑을 대신하여 신호 도래 시간 차이를 이용하였으며 실제 다중 환경에서 나타날 수 있는 신호 성분들의 펄스 열 주파수 추정을 위하여 기존의 방법과 비교함으로써 제시한 방법의 타당성을 검증하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.11-12
• /
• 2010

PSC girder with holed web have several benefits. Most of all placing tendon anchorage in the holes can make prestressing forces be loaded stepwise. In addition it can reduce the self-weight of the beams and increase the span length of beams. And holed web might minimize the interference of view. In this study, a 50-meter long full scale multilevel post-tensioned PSC girder was fabricated and modal test was carried out. In order to obtain precise frequency response, vibration exciter was placed at the middle of the girder and excited with several frequencies. Natural frequency and damping ratio were evaluated from FFT and PSD using the obtained frequency response and compared with numerical analysis result.