• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.419-433
• /
• 2021

Al-Si-Cu alloys benefit from the addition of copper for better hardness and strength through precipitation hardening, which results in remarkably strong alloys. However, the addition of copper expands the solidification range of Al-Si-Cu alloys, and due to this, these alloys become more prone to hot tearing, which is one of the most common and serious fracture phenomena encountered during solidification. The conventional evaluation method of the hot tearing properties of an alloy is a relative and qualitative analysis approach that does not provide quantitative data about this phenomenon. In the present study, the mold itself part of a device developed in Instone et al. was partially modified to obtain more reliable quantitative data pertaining to the hot tearing properties of an Al-Si-Cu casting alloy. To assess the influence of Cu element, four levels of Cu contents were tested (0.5, 1.0, 3.0, and 5.0 wt.%) in the Al-Si-Cu system alloy and the hot tearing properties were evaluated in each case. As the Cu content was increased, the hot tearing strength decreased to 2.26, 1.53, 1.18, and 1.04 MPa, respectively. At the moment hot tearing occurred, the corresponding solid fraction and solidification rate decreased at the same temperature due to the increase in the solid-liquid coexistence range as the Cu content increased. The morphology of the fracture surfaces was changed from dendrites to dendrites covered with residual liquid, and CuAl₂ phases were observed in the vicinity of hot tearing.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.39-61
• /
• 2008

Objectives : The present study was performed to investigate whether acupuncture stimulation in the rats affected regeneration properties of the injured sciatic nerve. A differential effect of acupuncture stimulation on the one point near the spinal nerve root controlling sciatic nerve activity and the other point in the peripheral area subordinated by injured nerve was compared. Materials and Methods: Rat sciatic nerves were injured by crush, and the effects on axonal regeneration on injured sciatic nerves were evaluated by acupuncture stimulation at two different regions. In proximal acupuncture stimulation group, acupuncture stimulation was performed on Huatuo Jiaji(EX B2) points located from L5 to S1 vertebral levels to stimulate the nearest spinal nerve root that innervates sciatic nerves. In distal acupuncture stimulation group, acupuncture stimulation was performed on Zusanli(ST 36) and Weizhong(BL 40) points to stimulate at peripheral area dominated by injured sciatic nerves. Acupuncture stimulation was given every other days for 1 or 2 weeks. Sciatic nerve tissues collected from acupuncture stimulation experimental groups, injury control group, and intact animal group were used for protein analysis by Western blotting or Hoechst nuclear staining. To determine axonal regeneration, Dil fluorescence dye was injected into the sciatic nerve 0.5 cm distal to the injury site in individual animal groups and Dil-labeled cells by retrograde tracing were measured in the DRG at lumbar 5 or in the spinal cord. DRG sensory neurons prepared from individual animal groups were used to measure the extent of neurite outgrowth and for immunofluorescence staining with anti-GAP-43 antibody. Results : Animal groups given proximal or distal acupuncture stimulation showed upregulation of GAP-43 and Cdc2 protein levels in the sciatic nerve at 7 days after injury. Cdk2 protein levels were strongly induced by nerve injury, but did not show changes by acupuncture stimulation. Phospho-Erk1/2 protein levels were elevated by acupuncture stimulation above those present in the injury control animals. These increase in regeneration-associated protein levels appeared to be related with increase cell proliferation in the injured sciatic nerves. Hoechst 33258 staining of sciatic nerve tissue to visualize nuclei of individual cells showed increased Schwann cell number in the distal portion of the injured nerve 7 and 14 days after injury and further increases by acupuncture stimulation particularly at the proximal position. Measurement of axonal regeneration by retrograde tracing showed significantly increased Dil-labeled cells in proximal acupuncture stimulation group compared to distal acupuncture stimulation group and injury control group. Finally, an evaluation of axonal regeneration by retrograde tracing showed increased number of Dil labeled cells in the DRG at lumbar 5 or in the ventral horn of the spinal cord at lower thoracic level at 7 days after nerve injury. Conclusions : The present data show that the proximal acupuncture stimulation at Huatuo Jiaji(EX B2) points governing injured sciatic nerves was more effective for axonal regeneration than the distal acupuncture stimulation. Further studies on functional recovery or associated molecular mechanisms should be critical for developing animal models and clinical applications.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.615-620
• /
• 2018

Evaluation of clinical usefulness of current perception threshold test and vibration sense perception threshold test in diagnosing the diabetic poly-neuropathy patients is one of the diagnosis methods for diabetic poly-neuropathy. Up to the present, some diagnostic methods were used for diabetic poly neuropathy patients. For example, there are neuropathy impairment score test of lower limbs, nerve conduction test, cooling detection threshold test, heat-pain threshold test and so on. However, most of the above tests require very expensive cost and take a lot of time in test. In this paper, a new apparatus estimating vibration sense ability is introduced. For this purpose, the VCM(voice coil motor) stimulating patient's peripheral nerve and current amplifier were manufactured. Also, softwares sensing and driving the vibration detection threshold test in order to measure the quantitative vibration sensory levels in diabetic poly-neuropathy patients were developed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.1-15
• /
• 1969

A study on the complete zoeal development and the glaucothoe of Pegurus lenuginosus de Haan wvas conducted in the laboratoy. 1) P. lanuginosus had four zoeal stages and a single glaucothoe stage. 2) At mean temporature $13.6^{\circ}C$ and mean salinity $33.67\%_{\circ}$, total duration of the zoeal stages was approximately 31-32 days. 3) The zoeal larvae of P. lanuginosus can be easily distinguished from those of other Pagurus species in having 7+7 telson processes of which number as well as shape is consistent throughout all the zoeal stages. 4) The antennal exopodite bears five pulmose setae, and the endopodite is naked throughout the zoeal stages. 5) The 6th abdominal segment has no mid_dorsal spine on its posterior margin during the 3rd and 4th stages. 6) The basipodites of uropod are naked on the distal margin. 7) Mandibular palp is absent in the 4th stage. 8) Antenna of glaucothoe is long extending far beyond the chelipeds. 9) Ocular scale is absent in the glaucothoe. 10) Glaucothoe has 3+3 telson processes on the distal margin of the telson.

• The Korean Journal of Soil Zoology
• /
• v.5 no.2
• /
• pp.71-83
• /
• 2000

Mylonchulus jinjuensis n. sp. is 1.8-2.2 mm long, spicules 58-$67{\mu}textrm{m}$ long and is distinguishable by basally situated subventral teeth, presence of hypodermal glands and ventural body pores. Mylonchulus taeguensis n. sp. is 1.3-1.8 mm long, spicules 52-$64{\mu}textrm{m}$ long and is characterized by having small denticle on dorsal wall of buccal cavity at the level of dorsal tooth apex, and two each pre- and post-vulval papillae. Mylonchulus polynicus is reported here for the first time from Korea, is described and illustrated. Princhulus pachydermis n. sp. is 2-2.3 mm long and is distinctive in having very thick body cuticle and absence of caudal glands and spinneret. Prionchulus koriensis n. sp. is 1.7-2.0 mm long and is characterized by having elongate-conoid tail with sharply pointed terminus and presence of caudal glands.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.3
• /
• pp.326-330
• /
• 2016

Two naturalized species, Polygonum ramosissimum Michx. (Polygonaceae) and Spergularia bocconi (Scheele) Graebn. (Caryophyllaceae) were found along the southwest seashore of the Korean Peninsula. Polygonum ramosissimum is distinguished from other species in the same genus taxa as follows: not granular achens, lanceolate or oblanceolate leaves. Spergularia bocconi is distinguished from other species in the same genus taxa by having glandular hairs on stems, leaves, peduncles, and outer surfaces of sepals. We provide here a description and photographs of two species and a key to related taxa in Korea.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.85-90
• /
• 2001

The ultrastructures of the fertilized egg envelope from long nose barbel, Hemibarbus longirostris belong to Cyprinidae was studied using scanning and transmission electron microscopes. The fertilized egg was adhesive type, have a single micropyle resembling the pathway of sperm in the area of the animal pole. An outer surface of the fertilized egg envelope was arranged by adhesive structures irregularly. In section of fertilized egg, the egg envelope consists of two layers, an outer adhesive twofold layer with mushroom-like cluster and an inner lamellae layer consisting of four layers. These ultrastructural characters of fertilized egg envelope from long nose barbel can be utilized in taxonomy of teleost.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1623-1630
• /
• 2010

In this study, effective forming methods for reducing the roll-over of a sector tooth, which is a main component of an automotive seat recliner, are proposed. Due to the large amount of roll-over, accurate contact between the inner gear of a sector tooth and the outer gear of a pawl tooth cannot be normally achieved; thus sensitivity and safety for the passengers decrease. To overcome the aforementioned drawback, we investigated the effect of flowcontrol forming methods involving local embossing die, coining punch, and VIC (Variable Inverse Clearance) on the roll-over depth by FE-analysis and an experiment. The results of a fine-blanking experiment for verifying the proposed methods showed that VIC type is decidedly superior from the aspects of reduction of roll-over and tool strength of the sector tooth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1899-1907
• /
• 2013

This paper presents an efficient defect detection and classification system based on reference image for COF (Chip-on-Film) which encounters fatal defects after ultra fine pattern fabrication. These defects include typical ones such as open, mouse bite (near open), hard short and soft short. In order to detect these defects, conventionally it needs visual examination or electric circuits. However, these methods requires huge amount of time and money. In this paper, based on reference image, the proposed system detects fatal defect and efficiently classifies it to one of 4 types. The proposed system includes the preprocessing of the test image, the extraction of ROI, the analysis of local binary pattern and classification. Through simulations with lots of sample images, it is shown that the proposed system is very efficient in reducing huge amount of time and money for detecting the defects of ultra fine pattern COF.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.85-85
• /
• 2019

하천시설물 설계, 시공 및 관리에 있어서 구성재료의 보호능력에 따라 예상하지 못한 조건에서 쉽게 파손될 수 있다. 이러한 영향은 하천환경의 변화를 야기시킬 수 있다. 제방 표면 재료는 제외 비탈면의 침식 방지를 목적으로 사용되는 재료로 주로 호안블록. 식생 매트, 사석, 돌망태, 식생등이 주로 사용되고 있다. 국내에서는 2000년대 이전에는 자연 흙사면의 식생, 돌망태, 단순 돌기형 콘크리트 블록 등이 주로 사용되었으며 2000년대 이후에는 하천환경을 고려하여 식생의 생장이 가능한 친환경 호안 블록 및 식생 매트의 적용이 일반적으로 시공되고 있다. 제방의 수리적 설계를 위해서는 재료 표면의 수리 특성, 즉, 조도계수 및 한계 유속, 한계 소류력이 제시되어야 하는데 이는 실험을 통해서 결정되어야 한다. 때문에 본 연구에서는 자연형 하상재료를 이용하여 바이오 폴리머 첨가시 증가하는 방어능력에 대한 향상도를 평가하는 실험적 평가 방법을 제안하기위해 홍수시 수리조건을 반영하여 상류에서부터 사류까지 다양한 유속범위에 따른 세굴 및 침식에 대한 실험을 진행하였다. 본 연구에서는 자연하천과 유사한 조건의 경사를 가지는 경사수로에서 실험연구를 통해 제방재료의 안정성 평가방법을 개발하였고, 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 기존 문헌에서 제시되었던 측정 장치를 이용하여 바이오폴리머의 첨가에 유무에 따라 세굴에 대한 방어능력의 향상정도를 측정하고자 세굴 및 침식에 대한 평가 방법을 제시하고 있다.