• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.963-967
• /
• 2006

어떤 강우사상에 대해서 특정유역으로부터의 오염물질 유출특성은 첨두농도, 산술 평균농도, 첨두 오염물질 부하량, 평균 오염물질 부하량 또는 총 유출 부하량 등으로 나타낼 수 있다(이재수 등, 2001). 그러나, 대부분의 경우 강우시 발생하는 총 부하량이 개개의 농도 또는 첨두 부하량보다 더욱 중요하다. 그 이유는 유출사상이 비교적 짧고, 강우 유출수가 유입되는 수체, 특히 저수지나 댐 내에서는 어느 정도의 혼합 현상이 수반되므로 저수지내의 오염물질 농도는 강우로 인한 유출수(저수지로 유입되는)내 개개의 농도변화보다는 결국 총 부하량의 반응이기 때문이다. 특히, 저수지나 호수에서 질소와 인과 같은 영양염류에 대해서 총 부하량은 가장 중요한 수질영향 및 결정 변수일 수밖에 없다. 이와 같은 이유로 강우사상에 대한 평균농도 또는 유량가중 평균농도(EMC, event mean concentration)는 비점원 오염물질의 유출을 평가하는데 가장 적절한 인자로 인식되고 있으며, 가장 널리 이용되고 있다 (EPA, 1983). 본 연구에서 소하천 유역을 대상으로 유량과 수질농도를 실측하여 대상하천에 대한 수문자료를 구축하고, 오염부하모의 모형을 통해 대상유역에서의 강우사상별 오염부하량을 모의하였는데 모형의 보정은 실측된 유량자료를 활용하였으며, 실측된 수질농도자료와 유량자료로 산정한 오염부하량 자료를 통해 검증하였다. 검증된 모형에 대하여 100개의 강우사상에 대한 무작위 모의를 수행하였고, 결과자료를 활용하여 대상하천에 대한 강우-오염부하량의 상관관계식을 도출하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.841-852
• /
• 2010

An integrated process control (IPC) procedure is a scheme which simultaneously applies the engineering control procedure (EPC) and statistical control procedure (SPC) techniques to reduce the variation of a process. In the IPC procedure, the observed deviations are monitored during the process where adjustments are repeatedly done by its controller. Because the effects of the noise, the special cause, and the adjustment are mixed, the use and properties of the SPC procedure for the out-of-control process are complicated. This paper considers efficiency of EWMA charts for detecting special causes in an ARMA(1,1) noise model with a minimum mean squared error adjustment policy. And we propose the readjustment procedure after having a true signal. This procedure can be considered when the elimination of the special cause is not practically possible.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.649-652
• /
• 2006

폐나, 기관지 등의 호흡기, 기타 장기에는 매우 미세한 크기의 털 형태의 섬모라고 하는 부속기관을 가지고 있다. 점액을 이동시키고 기타 물질들을 배출할 때 유용한 역할을 하는 이 섬모들은 동기화된 패턴으로 진동을 한다. 이러한 움직임은 각각의 종이 가진 특성뿐만 아니라, 같은 종의 현재의 상태에 따라 다양한 특징들을 보여준다. 시약 투여 시 혹은 환경 변화에 따른 생체 반응 등과 같이 다양한 특성 및 반응 연구에 이러한 섬모의 진동 주파수 (Ciliary Beat Frequency, CBF)를 이용하고 있다. 섬모의 진동 주파수 측정에 대해 몇몇 연구가 있어왔으나, 규격화되거나 대표적인 방법은 아직까지 없으며, 각각의 방법마다 잡음에 약하든지, 빠르게 움직이는 섬모의 주파수 측정에 어려움이 있거나, 고비용 시스템 필요 등의 단점들이 있다. 최근 들어 영상 기술의 발달로 영상을 이용한 CBF 측정 방법들이 제안되고 있다. 본 논문에서는 CCD 카메라로 촬영한 영상을 이용해서 섬모의 영상에서 가중 평균을 응용한 위치 값으로 섬모의 움직임을 추출, FFT를 통해 보다 정확하고 간편하며 좀 더 다양한 영상에 적용시킬 수 있는 CBF 측정 방법을 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.911-913
• /
• 2013

The user's context awareness is important to the reliability of sensors data. The sensor data is constantly change to external temp, internal& external environment and vibration. This noise environment is affecting that the data collected information from sensors. Of course this method of digital filter and inference algorithm specifically request for the use of ripple noise and action inference. In this paper, experiment was a comparison of the KF(Kalman Filter) and WMAF(Weight Moving Average Filter) for noise decrease and distortion prevention according to user behavior. And, we compared the EWDF(Extended Weight Dual Filter) with several filer. In an experiment, in contrast to other filter, the proposed filter is robust in a noise-environment.

• Journal of KIISE:Databases
• /
• v.33 no.4
• /
• pp.396-408
• /
• 2006

Moving object databases manage a large amount of past location data which are accumulated as the time goes. To retrieve fast the past location of moving objects, we need index structures which consider features of moving objects. The KDB-tree has a good performance in processing range queries. Although we use the KDB-tree as an index structure for moving object databases, there has an over-split problem in the spatial domain since the feature of moving object databases is to increase the time domain. Because the over-split problem reduces spatial regions in the MBR of nodes inverse proportion to the number of splits, there has a problem that the cost for processing spatial-temporal range queries is increased. In this paper, we propose the dynamic split strategy of the KDB-tree to process efficiently the spatial-temporal range queries. The dynamic split strategy uses the space priority splitting method for choosing the split domain, the recent time splitting policy for splitting a point page to maximize the space utilization, and the last division policy for splitting a region page. We compare the performance of proposed dynamic split strategy with the 3DR-tree, the MV3R-tree, and the KDB-tree. In our performance study for range queries, the number of node access in the MKDB-tree is average 30% less than compared index structures.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.125-134
• /
• 2010

It is occurred bus arrival time errors when a bus arrives at a bus stop because of a variety of traffic condition such as traffic signal cycle, the time to get on and off a bus, a bus-only lane and so on. In this paper, bus delay time which is occurred as the result of traffic condition was estimated with Markov Chain process and bus arrival time at each bus stop was predicted with it. As the result of the study, it is confirmed to improve accuracy than the method of bus arrival time prediction with existing method (weighed moving average method) in case predicting bus arrival time using 7 by 7 and 9 by 9 matrixes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.57-69
• /
• 2022

Even though demand to charge EV(electric vehicles) is increasing, there are some problems to construct EV charging stations and problems from deficient them. Typical problem of EV charging stations is discordance for EV charging station location with its demand. This study investigates methods to determine the optimized location for fast EV charging stations considering charging demand in Seoul. Firstly, variables influencing on determination of determine the optimized location for fast EV charging stations were decided, and then evaluation of weights of the variables and data collection were conducted. Using the weights, location potential scores for each area-cell were calculated and optimized locations for fast EV charging stations were resulted.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.11-20
• /
• 2017

In this paper, we introduced linear spatial time series (space-time autoregressive and moving average model) and nonlinear spatial time series (space-time bilinear model). Also we estimated the parameters by Kalman Filter method and made comparative studies of power of forecast in the final model. We proposed several weight matrices such as equal proportion allocation, reciprocal proportion between distances, and proportion of population sizes. For applications, we collected Mumps data at Korea Center for Disease Control and Prevention from January 2001 until August 2008. We compared three approaches of weight matrices using the Mumps data. Finally, we also decided the most effective model based on sum of square forecast error.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2007

In high speed communication networks, the determination of a transmission rate is critical for the stability of a closed-loop network system with the congestion control scheme. In ATM networks, the available bit rate (ABR) service is based on a feedback mechanism, i.e., the network status is transferred to the ABR source by a resource management (RM) cell. RM cells contain the traffic information of the downstream nodes for the traffic rate control. However, the traffic status of the downstream nodes can not be directly transferred to the source node in the IP based networks. In this paper, a new rate-based congestion control scheme using an exponential weighted moving average algorithm is proposed to build an efficient feedback control law for congestion avoidance in high speed communication networks. The proposed congestion control scheme assures the stability of switch buffers and higher link utilization of the network. Moreover, we note that the proposed congestion scheme can flexibly work along with the increasing number of input sources in the network, which results in an improved scalability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm