• Journal of the Korean Chemical Society
• /
• v.62 no.6
• /
• pp.433-440
• /
• 2018

The pyrolysis has been universally applied to recycle the waste artificial marble. However, the existing heat treatment equipment has relatively low heat transfer efficiency into the inner part of the waste artificial marble. Besides, it leads to unnecessary excessive gas during the partial carbonization of the polymethyl methacrylate (PMMA) and raises the risk of fire due to heat at an extremely high temperature. This study suggests the process of pyrolysis at the formation state after adding the starch to waste artificial marble to overcome above-mentioned problems. As the result of experiments, this method showed that the pyrolysis of waste artificial marble was greatly improved at comparatively low temperature condition of $350^{\circ}C$. Moreover, it also manifested the effect on securing the stability and energy savings necessary for the recovery of methyl methacrylate (MMA) and ${\alpha}$-alumina (${\alpha}-Al_2O_3$).

• The Korean Journal of Mycology
• /
• v.42 no.3
• /
• pp.207-212
• /
• 2014

This study was conducted in order to investigate the physiological activities, including antioxidative, fibrinolytic, thrombin inhibitory, and ${\alpha}$-glucosidase inhibitory activities of the water extract and solvent fractions isolated from Pholiota adiposa. The antioxidative activities of the water extract and water fraction were 57.57% and 48.27%, respectively. The fibrinolytic activity was strong only in the ethyl acetate fraction at 0.70 plasmin units/mL. The ethyl acetate fraction showed high thrombin inhibitory activity, and a-glucosidase inhibitory activity at 77.67% and 89.32%, respectively. The ethyl acetate fraction hydrolyzed both $A{\alpha}$ and $B{\beta}$ subunits of human fibrinogen, but did not show reactivity for the ${\gamma}$ form of human fibrinogen. Fibrinolytic activity of the ethyl acetate fraction was not decreased by heating for 10 min at $100^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.220-224
• /
• 1993

Antioxidative activities of brown materials extracted from the three kinds of roasted coffee beans by water were examined. Antioxidative activity was assessed by the AOM at $120^{\circ}C$ and the oven test at $60^{\circ}C$ on lard. The brown materials of them showed the considerable antioxiant activity. The brown materials of Colombian coffee beans were more effective than those of Robusta or Brazil beans. The antioxidative activities of brown materials from Colombian coffee beans roasted at $210^{\circ}C$ increased in proportion to the browning intensity up to 16 minutes of roasting time, but the antioxidant activities of the brown materials upon further roasting time decreased gradually. In changes of extraction temperature from $30^{\circ}C\;to\;180^{\circ}C$ on the coffee beans roasted at $210^{\circ}C$ for 16 minutes, the antioxidative activities of brown materials did not change as the extraction temperature increased to $180^{\circ}C$. The antioxidative activities of the coffee extracts were thought to be caused by browning reaction materials produced during the roasting process only.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.477-481
• /
• 1992

As a series of fundamental research projects to produce doenjang (Korean fermented soy paste) of better quality, two kinds of doenjang were manufactured from a traditional meju (Korean soy bean koji) and the mixed with Aspergillus oryzae and Bacillus natto, and histological changes in the cell structures of soy bean of the two were reported doenjang samples were observed and compared during the entire period of fermentation processes. Cell walls of the soy bean were ruptured by pressure and heat during the pressure cooking process and some of them were observed to have the ghost-like shapes. Remarkable differences in the plasmolysis of the cytoplasms were observed between the seed coat and the inner part of soy bean. Small vacuoles resulting from the fusion of the glycoprotein globules by protease and from the hydrolysis of the starch granules by amylase were also observed. Penetration of microorganisms was transferred from the seed coat to the inside of soy bean as the fermentation proceeded. Slimy substances were observed on the seed coat and the parenchyma cells of soy bean fermented with the mixed with Aspergillus oryzae and Bacillus natto. Cell walls of soy bean became difficult to stain and they showed unusual, polygonal shapes as the fermentation proceeded. Samples fermented with the mixed with Aspergillus oryzae and Bacillus natto showed more remarkable tendencies than traditional meju.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.82-87
• /
• 2011

Heat transfer oils are used in applications such as heating systems of chemical plant, refinery heat exchange systems, gas plant process, injection molding systems, and pulp and paper processing. These oils are extremely stable and resistance to thermal and oxidative degradation. In the event of a spill or accidental release of heat transfer oils, it can be ignite easily when there is an ignition source. This paper discusses the flammability and thermal stabilities of new and used oils. The flammability of the oils are assessed by measuring changes in flash point and auto ignition temperature. The thermal stability of oils are evaluated by the thermal screening unit ($TS^u$) and the differential scanning calorimeter (DSC). From the experimental results, it is suggested to give fire hazard characteristics to safe precautions for the proper use and treatment of heat transfer oils.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.46-54
• /
• 2015

Nitrous oxide is known as green and safe propellant, and can be supplied by its own vapor pressure. So, many liquid propulsion research institutes and university laboratories use nitrous oxide as oxidizer of experimental liquid rocket engine. However, the unknown explosions occurred twice during hot fire experiments using subscale ethanol/nitrous oxide thruster. In this paper, we surmised that the explosions were caused by the decomposition of nitrous oxide in the injector body and the recondensation of nitrous oxide. Improvement and the safe handling methods are suggested.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.455-460
• /
• 2012

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel has been studied as an important drug delivery system due to its volume transition or temperature-responsive swelling properties, whose phase separation temperature is similar to the body temperature. However, because of hydrophilic PNIPAM, hydrophobic drugs are difficult to be uniformly loaded in the networks. Antioxidant alpha-lipoic acid (LA) can be prepared as a polymer(polylipoic acid, PLA) by ring opening polymerization, which is hardly developed as a material due to its low molecular weight and easy depolymerization. To overcome this limitation, a hydrophobic active ingredient, LA was reacted with NIPAM into stable hydrogels. Simple thermal radical reaction successfully resulted in a hydrogel (PNIPAM/PLA), which was confirmed by DSC, FTIR, and Raman spectroscopy. The PNIPAM/PLA showed temperature-responsive properties, and their volume swelling decreased with an increase in lipoic acid content. These hydrogels can carry hydrophobic drugs with PNIPAM and the hydrogels could be useful as final drug delivery systems having lipoic acid as an antioxidant.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.897-901
• /
• 2003

The sulfating reaction of coal fly ash with ammonium sulfate and the microwave extraction of aluminum ions from the resultant materials using sulfuric acid have been investigated. The (NH$_4$)$_3$Al(SO$_4$)$_3$ formed by the reaction of coal fly ash and ammonium sulfate decomposed to NH$_4$Al(SO$_4$)$_2$ at $\geq$ 350$^{\circ}C$. The maximum efficiency of aluminum ions extracted from the sulfating reaction product (400$^{\circ}C$, 120 min) by microwave heating (90$^{\circ}C$, 240 min) using 1 M H$_2$SO$_4$ was 84％ (based on Al content in coal fly ash) but 77％ by conventional heating at same condition.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.420-426
• /
• 2002

$ZrO_2$, $Y_2O_3$-doped $ZrO_2$ and CaO-doped $ZrO_2$ powders were prepared by hydrothermal crystallizing spherical $ZrO_2$ gel which had been synthesized by thermal hydrolysis reaction. After the hydrothermal crystallization process, the formed crystallized powders sustained its original spherical shape and had the mean particle size of $0.4{\mu}m$. The particles were composed of about 10nm sized primary particles. The agglomeration strength between the primary particles appears very weak considering that the spherical particles were broken into the primary particles during the pressing process. The particle shape, size, phase fraction and dopant content were analyzed and crystallization mechanism of spherical gel was discussed.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.33-39
• /
• 2014

Heat transfer oils are used in applications such as chemical plant heating systems, refinery heat exchange systems, certain gas processes, injection molding systems, and pulp and paper processing. These oils are extremely stable and resistant to thermal and oxidative degradation. In the event of a spill or accidental release of heat transfer oils, it can be ignited easily when there is an ignition source. This study discusses the status of safety management through the actual status of the heat transfer oils to prevent fire and explosion accidents in industries for process safety management. The actual status of the heat transfer oils in process system of industries surveyed by a questionnaire developed. The results of this study can be used to help establishment of safety management to prevent fire and explosion accidents, such as the management of heat transfer oils, safe operation and maintenance in heat transfer oil processes.