• Plant Journal
• /
• v.9 no.2
• /
• pp.42-45
• /
• 2013

The worldwide issue of greenhouse gas reduction has recently drawn great attention to carbon capture and storage(CCS). In this study, we developed a 10,000 ton/year pilot injection plant for geological storage of carbon dioxide. Major components of the pilot plant include a pressure pump, a booster pump, and an inline heater to bring liquid carbon dioxide into its supercritical state. The test results show that the pilot plant readily achieves the injection pressure and temperature, showing satisfactory control performance. The overall power consumption is 2,000 ~ 2,500 W, more than 75% of which consumed by the pressure pump. This study will facilitate varied research on greenhouse gas reduction as the only domestically developed system for geological injection.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.167-170
• /
• 2006

For a short time a pyre-starter should turn the blades of a turbine to the adequate rotational speed by a single operation. Through this process the pressures of the components of a propellant rise rapidly up to the operating point, and the components enter into a gas-generator. Combustion in the gas-generator occurs to keep the turbopumps working. In this research characteristic parameters of a pyre-starter which correspond to the required performance of the turbopump before the gas-generator starts to work were selected

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.466-470
• /
• 2000

Externally pressurized air journal bearing has been widely used in high-speed spindle system and precision machinery because of its characteristics such as substantially low frictional loss, low heat generation and averaging effect leading better running accuracy. But air journal bearing have a disadvantage of the low load capacity due to the low viscosity. In this paper, The air journal bearing design to overcome the defects of air bearing such as low stiffness and dimping coefficients was investigated theoretically.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.54-54
• /
• 2011

실크제품 생산 공정에서 발생하는 셀베지는 실크직물 생산량의 약 10% 정도 발생하지만 비용절감을 위해서 경사에 실크외의 합성섬유를 사용함으로써 효과적인 회수기술이 없어 전량 폐기되고 있어 이를 효과적으로 재활용할 수 있는 맞춤형 셀베지 분리기계 및 분리 system을 개발하고 방적사의 원료로 재활용하여 신규 수요를 창출할 수 있는 고효율 회수장치 개발 및 방적사, 부직포 제조기술을 개발 하고자 한다. 경위사분리기의 기본 구성을 보면 제직현장에서 레피어 직기는 원단의 좌우측에서 절단된 셀비지를 한데 모아 두겹으로 배출하기 때문에 수거된 셀비지를 하나씩 분리하여 연속작업이 가능하게 권취하였고, 마찰에 의한 정전기를 막기 위해 물에 적신 후 가압롤러로 경사에 장력을 부여함과 동시에 물기를 제거하며, 경사를 충분히 벌려주면서 회전날에 의한 진동으로 위사를 경사와 분리시키면서 수직방향으로 낙하하도록 하였다. 경사의 권취속도와 회전날의 속도를 조절할 수 있도록 하여 기계분리 능력을 올릴 수 있도록 하였다.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.174-180
• /
• 2006

The present paper describes transient thermal and mechanical analyses of a lox/kerosene type turbopump in a LRE(Liquid Rocket Engine). Turbopumps are used to pressurize propellants to achieve higher specific impulse of LRE. The turbopump under development has been designed and verified by structural analyses using finite element methods. Some parts of the turbopump operate under cryogenic environments, while the others work under ambient and high temperature environments. Therefore, numerical analysis at a turbopump system level is essential. In this study, casing assemblies of lox pump and fuel pump were analyzed to determine strength test and air-tightness test conditions. Also, some operational stress and strains of fuel pump casings were measured and analyzed. Based on these results, stress concentration of fuel pump casings during the operation could be successfully predicted.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.132-137
• /
• 2011

A relationship between resisting moment and the structure of an automatic closure device is introduced for analyzing the effect of opening and closing condition on various fire door sizes in the pressurized room for smoke control system. The larger the size of fire door is, the more force is required for reaching to opening and closing conditions and there exists the design range of fire door in the pressurized room reflecting the closing time of fire door, rotative velocity, a relation between rotative angle and force and the efficiency of the automatic closure device.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.735-740
• /
• 2005

In this paper, we designed a wedge type rail-clamp which can protect container crane from sudden wind blast with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine an angle of wedge which prevent rotating of jaw and for smooth operation when wind blows. Therefore, this paper suggest a process to decide an angle of wedge within proper range obtained by experimental analysis as well as FEA of the wedge type rail clamp. A model with $6^{\circ}$ wedge angle is the most proper model to use in rail clamp bemuse it generated satisfactory clamping force and rotating angle underdesign specification.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.354-358
• /
• 2007

An experimental study was performed to understand spray characteristics of the slinger injector. system for the micro turbojet engine. In this fuel injection system, fuel is sprayed and atomized in the combustor by centrifugal forces of engine shaft. This experimental apparatus consist of a high speed rotating Spindle, slinger injector, pressure tank and acrylic case. The droplet size and velocity were measured by PDPA(Phase Doppler Particle Analyzer) and spray was visualized by using Nd-Yag laser-based flash photography. From the test results, the droplet size(SMD) is largely affected to rotational speed, mass flow rate and the number of injection orifice. From the this experimental study, we could understand the spray characteristics of the slinger injection system and obtain the optimum shape of the slinger injector nozzle which is suitable for the micro turbojet engine.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.27-32
• /
• 2010

This paper presents an investigation into the pinhead forming process with the objective of finding the optimal forming conditions. In order to this, the orbital forming analysis of a heading MIG was carried out using the explicit finite element method. Relationships between temperature by forming of load and stresses, rake angle by forming final shape and stress distribution were investigated through analysises in order to find an efficient solution. As a result, the higher temperature and orbital rake angle were the better forming conditions.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.77-78
• /
• 1993

쥬스제조시 청징공정에 있어서 UF의 응용은 현재까지 그리 주목받아 오지 못했다. 그러나 UF는 기존의 여과방법보다 더 간단하고 저렴한 기술이며 더 좋은 품질의 제품을 생산할 수 있다. 일반적인 사과쥬스 제조에 있어서 기존의 청징방법은 보통 2단계를 필요로 하는데 먼저 Pectinase와 같은 효소처리된 원료쥬스를 Decanter라는 회전진콩 여과기로 여과한 다음 가압여과기로 여과를 하게 된다. 이 두단계에 있어서 많은 양의 규조토가 필요한데 UF를 사용하여 청징여과를 하게 되면 규조토의 사용을 안하므로 생산비 절감 뿐만아니라 폐기물처리 문제까지도 해결해 준다. 도한 제품의 질, 특히 덫징도가 증가하며 수율도 높일 수 있고 노동비를 절감할 수 있으며, 효소는 막을 통과하지 않기 때문에 농축액에 축적되어 효소의 재사용에 따른 효소사용량 절감을 가져올 수 있다.