• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.1-8
• /
• 2016

An experimental study was performed for the combustion-field visualization of the burner which burns the liquid hydrocarbon fuel atomized by an ultrasonic oscillator. Configurations of the flame and combustion-field were caught by both high-speed camera and thermo-graphic camera, and those images were analyzed in detail through a post-processing. As a result, the combustion-field grew and reaction-temperature rose due to the strengthening of combustion reaction with the increasing flow-rate of carrier-gas. In addition, a phenomenon of flame flickering was discussed through the comparative analysis of the variational behaviors between the visible flame and IR (Infrared) flame-field.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.28-38
• /
• 2005

According to the recent development of measurement system utilizing one or a set of boreholes, visualization of the explored underground became to be a major issue. It induced even the introduction of monitoring apparatuses on the borehole wall with multi-function tool, but the usage of these was often limited by where is unfavorable rock condition and a few of engineers can approach. And so, a portable type of borehole camera with only the essential function has been investigated and a few of commercial models about this is recently being applied into the field condition. This paper was based on the monitoring results obtained using a commercial model by Dr. Nakagawa. Discontinuities in rock mass were the topic for the visualization, and it was studied how can visualize their three dimensional distribution and what a numerical formulation is needed and how to understand the visualization result. The numerical formulation was based on the geometric correlation between the dip direction / dip of discontinuous plane and the trend / plunge of borehole, a set of the equation of a plane was induced. As field application of this into two places, it is found that the above visualization methodology will be especially an useful geotechlical tool for analyzing the local distribution of discontinuities.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.5
• /
• pp.45-53
• /
• 2021

Digital morph expresses the imaginary beyond the representation of reality by expressing the narrative effect characteristically. In particular, the effect of affect can be considered to be a characteristic of digital cinema as a post-cinema. In (2013), Morphing image prominently shows the characteristics of post-cinema. By actively utilizing software technology, this film gives a shocking effect by expressing the magical image. Paying attention to the post-cinematic characteristics of morphing different from classical film, this article treated the characteristics of digital morphing. The digital morphing presents the flow of affect visualizing uncanny phenomenon of body transformation. This evokes concept of neuro-image which Patricia Pisters distinguished the neuropsychiatric pathology that appears actively on the contemporary digital screen. The Neuro-image goes beyond the temporality of Deleuze's time-image presenting future. Allegedly, the morphing of presents the neuro-images when Nina's body changed to hybrid body with black swan. Digital Morphing technique provides a shocking effect, showing delirium when the body bizarrely deformed while dancing ballet. This is different from the attraction of the morphing in film, it expresses the emotion of the neoliberal era beyond representation. In conclusion, the digital morphing presents the neuro-image system modulating the shock. This shows the characteristics of digital film which interacting and controling the shock effect as post-cinema.

• Archives of design research
• /
• v.13 no.1
• /
• pp.157-166
• /
• 2000

Since the cognitive science developed as a brandl of academic researdl, studies on human brains have flourished. Emotional features have been centered on the field of design, and the development of the design process has been diversified that makes use of the factors. The purpose of this study is to reflect the current trend and to convert the results into a method for designing. The researdl is based on the mind map techniques which spread like a trendy fashion, and tries to supply a theoretical explanation of how to overcome the fixed idea. Recognizing the importance of learned information in approaching a problem, I regarded the roles of left and right brain as analogue and digital images interpreting them by freely crossing language(digital images) and visual thought (analogue images), using mapping tedlniques. I pursued the research goal of the techniques focusing on the idea of using mapping. As a result of this. I established a logic system [figure 8] in that a proposition which starts as a problem introduction goes on until a problem solution, which is visualized with concept presentation, using a brainstorming technique. According to the suggested concept. I concluded that idea proliferation as a design demand can be solved by applying mapping techniques like one shown in figure 12.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.427-432
• /
• 2016

The mnemonic-system in numbers is useful to remember numbers. In this mnemonic-system, the graph or image to apply many ways such as dot, line, bar, and etc is a rather neat mnemonic. Mnemonics related to numbers are concerned chiefly with translating information into a method that the brain can retain better than its original form. In Tracing the previous work of this paper, we suggested a simple graph algorithm and arranged image algorithm for the mnemonic-system in numbers. In this paper, we evaluate and implement the numerical information system based on the mnemonic system to apply previous algorithm in mobile environments.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.187-194
• /
• 2004

Shear-Warp volume rendering has many advantages such as good image Quality and fast rendering speed. However in the interactive classification environment it has low efficiency of memory access since preprocessed classification is unavailable. In this paper we present an algorithm using the spacial locality of memory access in the interactive classification environment. We propose an extension model appending a rotation matrix to the factorization of viewing transformation, it thus performs a scanline-based rendering in the object and image space. We also show causes and solutions of three problems of the proposed algorithm such as inaccurate front-to-back composition, existence of hole, increasing computational cost. This model is efficient due to the spacial locality of memory access.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.667-670
• /
• 2007

볼륨 데이터에 대한 압축 기법의 필요성은 데이터 용량의 증가와 네트워크 사용량의 증가와 함께 더불어 증가해 왔다. 현재에는 다양한 압축 기법이 개발돼 있으며, 사용자는 데이터 유형이나 응용 분야에 맞춰 압축 기법을 선택, 적용할 수 있다. 그러나 최근에는 응용 과학자들로부터 생성되는 데이터의 용량이 기하급수적으로 증가했는데, 이렇게 응용과학 분야에서 생성되는 데이터는 대부분 3차원 볼륨 데이터다. 2차원 이미지나 3차원 동영상 데이터의 경우에는 다양한 표준 압축 방식을 사용할 수 있지만 3차원 볼륨 데이터에 적용할 수 있는 방법은 한정돼 있으며, 특히 시간가변(time-varying) 볼륨 데이터에 대한 압축 표준은 거의 존재하지 않는다고 볼 수 있다. 본 논문에서는 시간가변 볼륨 데이터에 대한 압축 방식을 제안한다. 이 방식은 가시화를 목적으로 하는 시간가변 볼륨 데이터의 인코딩을 목적으로 하며, MPEG의 I-프레임과 P-프레임 개념을 사용해서 압축률을 높인다. 본 방식은 시간가변 부동 소수점 데이터(single precision floating-point data)로 구성된 시간가변 볼륨 데이터를 대상으로 하는데, 한 블록 단위의 무작위 복원을 지원하며 Daubechies 웨이블릿 필터와 프레임간의 상관 관계를 사용, 대형 시간가변 볼륨 데이터를 이미지 화질을 보존한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.13-20
• /
• 2021

In this paper, a new algorithm is proposed to estimate the damage size by combining the reflected area with the reflected position and extracting contours in proportion to the maximum value of pixels from the visible image. The cumulative summation feature vector algorithm is used to obtain the area of the reflected signal. To get the position of the reflected signal, the signal correlation algorithm is used to decompose the reflected signal from the damage. The proposed algorithm is tested and validated for composite panels. Repetitive experiments are performed and it is confirm that the proposed algorithm is reproducible. Further, it is verified that the damage size can be estimated appropriately by the proposed algorithm.