• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.5-16
• /
• 1991

It was grown Cubic $ZrO_2(10 mol% Y_2O_3)$ single crystals doped with 1 wt% rare earth metal oxides (RE=Ce, Pr, Nd, Eu, Er) by Skull method. It was investigated electrical properties on (111) plane of grown single crystals by Impedance Spectroscopy. It was potted relation between temperature and electrical conductivities and observed the transition at $약300-400^{\circ}$ It was obtained activation energy on the migration of oxygen vacancy between low temperature (before the transition) and high temperature (after the transition till ${\11}500^{\circ}$) and its difference can be seen the activation energy of the formation of oxygen vacancies by break up defect complexes. It was obtained the activation energy according as add yttria and rare earth metal oxides and discussed ionic conduction mechanism. Grown single crystals showed Ce: orange - red, Pr: golden - yellow, Nd: lilac, Eu: light pink, Er: pink due to dopant effect from the light absorption data in the visible range.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.234-239
• /
• 2002

The spinel was calcined at temperatures in the range of $1000^{\circ}C$ to $1300^{\circ}C$ with $100^{\circ}C$ interval to evaluate the effect of calcination temperature on mechanical properties of spinel-glass dental composites. Although the average particle size of spinel calcined at temperatures from $1000^{\circ}C$ to $1200^{\circ}C$ was within 2.8~3.0 $\mu\textrm{m}$, the spinel calcined at $1300^{\circ}C$ was 4.66 $\mu\textrm{m}$ due to abnormal grain growth. Shrinkage and pore size of the spinel preform decreased and increased, respectively, as calcination temperature increased, indicating that the calcination temperature was significant to the powder compaction and the densification of the composites as a result of particle size and distribution. The optimum strength and the fracture toughness of the composite calcined at $1200^{\circ}C$ were 284$\pm$40 MPa, 2.5$\pm$0.1 MPaㆍ$m^{1/2}$ respectively. Optical experimental results showed that transmittance of the spinel-glass composite in the visible region was twice higher than that of the alumina-glass composite, suggesting that the spinel-glass composites possessed better aesthetic properties for all-ceramic dental crown application.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.79-88
• /
• 2009

Environment and climate changes affect all aspects of our society, and its researches are rapidly growing recently. The enhanced remote sensing technology made the satellite to be widely used in the environment monitoring applications with the increased worldwide interests. In this paper, recent development trends of environment monitoring payloads are researched. The major specifications, observational methods and objects of each payloads are surveyed and described. The environment monitoring payloads have been developed for the low-earth-orbit satellite to cover the entire earth area with single satellite. However, as the importance of time-scale resolution increases, payloads for geostationary orbit are under developing recently. Also, ultraviolet, visible, and infrared observation payloads are being developed depending on the monitoring objects. According to these trends, domestic environment monitoring payloads have to be developed with clear and careful mission analysis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.31-31
• /
• 2003

최근 각종 산업 기술의 발달과 함께 다량의 악취, 오염 물질이 심각한 사회문제로 대두되고 있다. 특히 산업 현장의 경우, 악취로 인해 작업 환경이 매우 열악하여 환경 설비의 개발이 절실히 요구되고 있다. 본 연구에서는 기존의 스크러버 집진 장치의 친수성 가스를 제거할 수 있는 장점을 유지하면서, 소수성 기체의 제거율이 낮은 단점을 보완할 수 있는 TiO$_2$나노 입자의 광분해 특성을 이용한 스크러버 집진 장치를 제작하였다. TiO$_2$ 광촉매 나노 입자는 실험실에서 합성한 QT를 비롯하여, 국내외에서 생산된 P-25, NT-20, ST-01로 특성 분석을 실시하였다. 광촉매 나노 입자의 특성 분석에는 X선 회절 분석법, 적외선 분광기, 제타 전위 분석기, 동적 광산란 분광기를 사용하였으며, 그 결과 ST-01이 본 실험에 가장 적합한 광촉매로 선정되었다. 악취 및 대기 오염 물질 선정은 염색 가공 공장에서 정련제, 산화 환원제등으로 많이 사용하고 있는 암모니아, 아세트산, 옥탄올, 휘발성 유기물질인 톨루엔, 벤젠으로 하여, 실험실 자체 제작한 batch type과 산업 현장에서 사용할 수 있는 continuous type의 스크러버 이용하여 실험하였다. 이들 물질의 제거율은 가스 크로마토그래피, 자외선/가시광선 분광기를 이용하여 조사하였으며, 친수성 기체인 암모니아와 아세트산의 경우는 기존의 스크러버 효율의 약 70%인 반면에, 광촉매를 이용한 스크러버의 경우 90%이상의 우수한 제거 효과를 보였다. 또한, 기존의 스크러버가 거의 분해를 할 수 없었던 소수성 기체 옥탄올, 톨루엔, 벤젠의 경우는 기존의 스크러버가 약 10%내외를 제거하는 것에 비해, 광촉매를 이용한 스크러버의 경우 약 80% 이상의 제거 효율을 나타내었다. 결과적으로 광촉매를 이용한 스크러버의 제거효율이 기존의 스크러버에 비해, 친수성 가스의 경우 20% 이상, 소수성 가스의 경우70% 이상 향상되었음을 알 수 있었으며, 본 연구를 통해 광분해를 이용한 스크러버가 기존설비의 장.단점을 충분히 보완 가능한 환경 설비임을 확인할 수 있었다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.565-572
• /
• 2001

At the most recent years, laser medical instruments, laser applications and laser nuclear fusion need strong visible light and ultraviolet rays. Nonlinear optical devices, such as harmonic generators and parametric oscillators, provide a means of extending the frequency range of available laser sources. Frequency conversion is a useful technique for extending the utility of high-power lasers. It utilizes the nonlinear optical response of an optical medium in intense radiation fields to generate new frequencies. These progresses have been used to generate high-power radiation in all spectral regions, from the ultraviolet to the far infrared. Optical parametric oscillators and amplifiers generate two waves of lower frequency They are capable of generating a range of wavelengths from a single frequency source, in some cases spanning the entire visible and near infrared regions. Consequently, in order to obtain the green light, the pulsed Nd:YAG laser using multiple-mesh PFN(Pulsed Forming Network) method with Nonlinear optical device was adopted. We compared the current pulseshapes with the laser output energy, and conversion efficiency.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.422-426
• /
• 2005

Visible-light activated polymer nanocomposites (PNC) were designed to be used for dental restoration. Hybrid-filler composed of barium silicate and nano-sized silica was adopted as a filler system. To improve the interfacial be havior of the resin matrix of bisphenol A glycerolate methacrylate/triethyleneglycol dimethacrylate, the surface of filler was hydrophobically treated with a silane coupling agent. Mechanical properties of PNC were investigated by measuring the abrasion resistance, and it was discovered that PNC showed excellent properties with an increase of nanofiller content. However, the polymerization shrinkage was consistently maintained under 3 vol% and the shrinkage continued even after photo-polymerization. In addition, a slight color difference between PNC specimens was observed with increase of nanofiller content.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.218-223
• /
• 2013

In this study, the reflectivity characteristics of Ag nano-coating grown by electroless plating were investigated in order to use as the reflecting plate of BLU (Back Light Unit) in the LCD (Liquid Crystal Display) or LED (Light Emitting Diode) display equipment. The microstructure of Ag nano-coating was polycrystalline nano-structure that consisted of Ag nano-crystals to be reduced and precipitated, and the size of reduced nano-crystals increased as the thickness of nano-coating increased. The reflectivity of Ag nano-coating in the visible light decreased as the thickness of nano-coating increased and the reduction of reflectivity was more severe in the short wavelength region of visible light. The decrease of reflectivity was closely related to the size of Ag nano-crystal and was thought to be due to the larger surface roughness of larger nano-coating thickness. Therefore, the finer Ag nano-crystals and thinner nano-coating thickness could be favorable for the higher reflectivity of Ag nano-coating grown by electroless plating.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.317-318
• /
• 2008

Cu-Pc유기물 반도체를 얼 진공증착기술로 유리기판위에 40 nm 두께로 적층하였다. 상온에서 적층한 박막과 상온에서 적층한 후 $250^{\circ}C$ 이상의 온도로 후열 처리한 박막과 박막 적층 시 기판의 온도를 $250^{\circ}C$로 고정하여 적층한 박막들을 상호 비교 분석하였다. 적층된 Cu-Pc의 박막의 온도조건에 따라 X-ray diffraction(XRD)의 결정 특성이 $\alpha$-phase와 $\beta$-phase로 뚜렷이 구분되었으며， 자외선-가시광선 영역의 광 흡수도(UV-visible absorption spectra)와 field emission scanning electron microscopy(FE SEM)를 이용하여 결정성장 방향 및 표면 특성 변화를 비교조사하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2003

To evaluate the quantitative nature of laser fluorescence(LF) and dye-enhanced laser fluorescence(DELF) on early enamel caries, artificial caries were induced on the bovine enamels and argon laser was irradiated on the surfaces of lesions. Fluorescence radiance from enamel specimen was recorded with CCD camera which was connected to PC image analyzing system. The difference of fluorescence of radiance(DFR) between the carious and the sound enamel in each sample of the LF and the DELF groups were measured by image analyzing program. The DFR of lesion surfaces measured with laser fluorescence and lesion depths were evaluated and the results are as follows: The caries lesions were discriminated from sound enamels by the darkness with LF and by the brightness with DELF. The DELF was more sensitive than the LF at the earlier stage of demineralization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.165-165
• /
• 2010

GaInZnO는 투명 비정질 산화물 반도체로서 태양전지, 평판 액정 디스플레이, 잡음방지 코팅, 터치 디스플레이 패널, 히터, 광학 코팅 등 여러 응용에 쓰인다. 이 논문에서는 투명전자소자로 관심을 모으고 있는 GaInZnO의 전자적 그리고 전기적 특성을 측정하였다. GaInZnO 박막은 $SiO_2$ (100)/Si 기판위에 RF 마그네트론 스퍼터링 증착법으로 $Ga_2O_3:In_2O_3:ZnO$의 조성이 2:2:1로 된 타겟을 가지고 박막을 성장시켰다. 성장한 후에 RTP를 이용하여 30분간 열처리 하였다. GaInZnO의 전자적 특성을 나타내는 띠틈 및 실리콘 기판과의 원자가 띠 오프셋 값을 측정하였으며, 이 값들을 통해 GaInZnO박막과 실리콘 기판과의 띠 정렬도 수행하였다. 띠틈은 반사 전자 에너지 손실 분광법(REELS)을 이용하여 측정하였고, 원자가 띠 오프셋은 광전자 분광법(XPS)을 이용하여 측정하였다. 열처리 온도가 $400^{\circ}C$까지는 띠틈의 변화 및 XPS 결합에너지의 변화가 없는 것으로 보아 열적안정성이 우수함을 알 수 있다. 반면 $450^{\circ}C$에서의 띠틈이 감소하는 것으로 보아 $450^{\circ}C$에서는 열적안정성이 깨지는 것을 알 수 있다. GaInZnO 박막을 채널 층으로 하고 전극은 알루미늄(Al)으로 된 TFT를 제작하여 전기적 특성을 조사하였다. TFT 특성 결과 이동도가 약, subthreshold swing(S.S)이 약 1.5 V/decade, 점멸비가 약 $10^7$으로 측정되었다. 유리 위에 증착시킨 GaInZnO 박막의 투과율을 측정해본 결과 모든 시료가 가시광선 영역에서 80%이상의 투과율을 갖는 것으로 보아 투명전극소자로 응용이 가능하다는 것을 알 수 있었다.