• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.62-62
• /
• 2000

비접촉식 온도센서는 물체에서 방출하는 적외선 등의 복사신호를 열에너지로 전환하고 이를 다시 전기신호로 2차 에너지 변환하여 온도를 감지하는 센서로 인체 검지를 응용한 다양한 상품 및 교통, 방재, 빌딩 시스템 등의 분야에 널리 응용되고 있다. 비접촉식 적외선 센서는 열에너지를 전기에너지로 변환하는 방법에 따라 양자형과 열형으로 구분되며, 이중 양자형은 광전도나 광기전력 효과 등을 이용하여 감도 및 응답성이 우수하다는 장점을 지니고 있지만, 소자부를 80K 이하 온도로 유지시키는 냉각을 필요로 하므로 대형 제작이 불가피하고 그 용도가 제한적이다. 열형은 냉각이 필요 없고 소형으로 제작가능한 장점을 지니고 있어 써모 파일이나 초전체를 이용한 번용 센서가 보급되고 있다. 그러나 써모파일의 경우 출력되는 전기 신호가 미약하여 감도 및 응답성을 향상하기 위해 구조가 복잡하고, 특히 모터초퍼나 저항을 전압으로 변환시키는 전력기 등이 필요로 하는 단점을 지니고 있다. 따라서 이러한 문제점을 보완하기 위해 열전재료 박막을 이용한 적외선 센서를 개발하려는 노력이 진행중에 있다. 열전박막을 이용한 적외선 센서는 열전재료의 Seebeck 현상을 이용하여 열에너지에서 전기에너지의 변환이 자가발전으로 이루어져 offset과 외부 바이어스를 필요로 하지 않는다. 또한 작은 온도 변화에도 그 감도와 응답성이 높고, 출력신호가 커서 증폭기 등이 불필요한 장점을 지니고 있다. 특히 초전형 센서가 상온에서도 기판에 대한 열 확산을 제어해야 하는 문제점을 갖는 반면, 열전박막형 적외선 센서는 고온에서도 안정된 출력 신호를 얻을 수 있어 그 활용 온도 범위가 크게 확대될 것으로 기대된다. 본 실험에서는 우수한 열전특성을 갖는 (Bi1-xSbx)2Te3 박막을 얻기 위해 열팽창계수가 작고 알칼리 원소가 0.3% 이하로 포함되어 있는 corning glass(# 7059)를 기판으로 사용하였다. 또한 최적의 열전특성을 나타내는 조성을 실험적으로 구하기 위해 (Bi0.2Sbx)2Te3 조성의 합금 타？ 위에 Bi2Te3 및 Sb2Te3 chip을 올려놓고 그 면적을 변화시켜 다양한 조성의 열전박막을 증착하였다. 열전박막의 증착시 산화와 오염에 의한 열전특성 변화를 최소화하기 위해 초기진공도를 1$\times$10-6 Torr로 하였으며, Ar 가스를 흘려주어 2$\times$102 Torr 의 증착진공도를 유지하였다. 열전박막을 증착하기 전에 기판을 10분간 200W의 출력으로 RF 처리하였으며, 30$0^{\circ}C$에서 33 /sec의 속도로 (Bi1-xSbx)2Te3 박막을 증착하였다. 이와 같이 제조된 (Bi1-xSbx)2Te3 박막의 미세구조를 SEM으로 관찰하고 EDS로 조성을 분석하였으며, XRD를 이용하여 결정성을 관찰하였다. 또한 (Bi1-xSbx)2Te3 박막의 Seebeeck 계수 및 전기비저항을 측정하고 증착된 박막조성, 결정상, 미세구조와 열전특성간의 상관관계를 고찰하였다.

• The Korean Journal of Malacology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 1993

한국의 담수에 광범위하게 서식하고 있으면서 역학적으로 중요한 역할을 하고 있는 두 종의 복족류 즉 쇠우렁이(Parafossarulus manchouricus)와 물달팽이(Radix auricularia coreana)의 소화기관 중에서 식도, 소화선 및 장에 대한 미세구조 관찰을 시도하였다. 이 부위들은 간흡충(간디스토마)과간질(소간디스토마)의 유생들이 그들의 생활사 중 거쳐가는 곳으로 알려진 소화관들이어서 이후 흡충류의 유충들이 위의 소화관에 주는 영향을 연구하는데 필요한 기초자료를 얻고자 수행된 것이었다. 관찰해 본 결과 다음과 같은 결론을 얻을 수 있었다. 식도의 상피조직은 두 종류에서 공히 원주세포와 원주섬모세포 및 점액분비 세포로 이루어져 있었다. 식도강상피 내에서도 어느 정도의 흡수와 소화가 이루어 지고 있음은 특이한 현상이라 하겠다. 소화선은 두 종에서 공히 복분지 관상선으로서 그 상피는 micovilli를 선강 또는 도관에 연한 유리표면에 가지고 있어 brush boredr을 이루고 있는 원주세포과 원주섬모세포로 구성되어 있었다. 이들 세포들의 내부 구조로 보아 소화세포와 배석세포로 구분할 수 있었다. 장의 상피는 원주세포와 원주섬모세포로 구성되어 있었으며 이들도 장강에 연한 유리표면에는 brush border를 이루고 있었다. 흡수와 분비기능이 활발한 것으로 사료된다. 전반적으로 보아 본 연구에서 관찰한 두 복족류의 소화관은 모든 부위에서 세포의 유리표면에 microvilli를 가지고 있어 물질의 흡수기능을 가지고 있음을 시사해주고 있었고, 이들 세포 중에는 때로 밀집한 cilia를 가지고 있어 소화관 내의 액체물질이나 이에 내포된 미세입자들의 유동을 도와주고 있음을 추측할 수 있었다.)은 결합조직으로 이루어진 근육질의 두꺼운 벽을 가지고 있었으며 내강은 돌출부위에 의해 4부분으로 갈라져 있었다. 내강에 연한 상피는 원주세포로 되어 있었다. 상음경(epiphallus)의 벽은 근섬유 다발은 벽의 외곽으로 갈수록 밀도가 높아졌다. 상부에 내강과 연결되는 함입구조(groove)를 가지며, 내강에 연한 상피는 섬모가 없는 원주세포로 이루어져 있었다. 음경(penis)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.183-190
• /
• 1995

Various factors such as sampling height in the chamber, sampling interval, sampling time at daytime and the effects of pedoturbation on methane emission during chamber installation were evaluated using a simplified closed static chamber method to measure methane flux in paddy soils. Sampling height of the chamber for representative samples was 65cm. An additional DC fan was required to attain an even methane gradient in the chamber. Considering the change of methane concentration and air temperature in the chamber, sampling is recommended to finish within 30 minutes after starting sampling. The aim of setting DC fan in the chamber was to get the thermal equilibrium in the chamber as well as the representative samples. Suitable time to collect the gas samples representing the day's methane flux was 0900~1200 hours. Gas sampling was possible even after installation of small chambers if the elapsed time was more than 6 hours and supporting stand would be to be added to minimize pedoturbation.

• Korean Journal of Poultry Science
• /
• v.46 no.1
• /
• pp.39-46
• /
• 2019

This study was conducted to investigate the effect of dietary bee venom on serum characteristics, antioxidant activity, and hepatic fatty acid composition in broiler chickens. A group of 875 one-day-old feather-sexed male broiler chicks were randomly allocated to five treatments with seven replicates (25 birds/replicate) for three weeks. A corn-soybean meal-based diet was used as the basal diet. Five dietary treatments were compared: 1) basal diet, 2) basal diet containing $10{\mu}g/kg$ of bee venom powder, 3) basal diet containing $50{\mu}g/kg$ of bee venom powder, 4) basal diet containing $100{\mu}g/kg$ of bee venom powder, and 5) basal diet containing $500{\mu}g/kg$ of bee venom powder. At 21 days, one bird per pen was slaughtered by asphyxiation in $CO_2$ gas, and blood was collected to measure serum characteristics and antioxidant activity. In addition, the liver was excised to measure the concentration of malondialdehyde and determine fatty acid composition. Increasing dietary bee venom in the diet failed to affect most serum parameters except for triglyceride and non-esterified fatty acids. Dietary bee venom inclusion quadratically increased the concentration of stearic acid (P<0.05), but decreased palmitoleic acid, oleic acid, linoleic acid, mono-unsaturated fatty acids, and poly-unsaturated fatty acids. Finally, dietary bee venom tended to lower hepatic malondialdehyde contents quadratically (P=0.054). In conclusion, our study revealed that dietary bee venom improved antioxidant capacity and affected fatty acid metabolism in broiler chickens.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.1-36
• /
• 2019

In line with the international community's movement to reduce greenhouse gas emission, Korea implemented FIT(Feed in Tariff) in 2002 as part of its renewable energy development project. Although the policy had shifted to full-scale RPS(Renewable Portfolio Standards) in 2012, policymakers are still seeking changes due to policy ineffectiveness. While previous studies explain sudden policy changes through external factors, recent research sheds light on internal factors in the process of policy transition. The purpose of this study is to investigate the factors that are responsible for rapidly changing policies in latecomer nations. In order to find this, we look at the case of transition from the FIT to the RPS in Korea's expansion of renewable energy policy. As a result of the research, it is confirmed that the Top-Down decision making system of Korea and the external regulatory change cause rapid policy transition. By looking at these variables, we propose useful implications for policymakers to minimize the policy failure in future policy design and evolution.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.339-344
• /
• 2021

In order to improve the PEMFC (Proton Exchange Membrane Fuel Cell) durability, it is important to accurately evaluate the durability of the membrane in a short time. Recently, DOE (Department of Energy) reported a protocol that combines the chemical and mechanical durability of membranes to evaluate them effectively. This protocol applies chemical/mechanical deterioration to the membrane by repeating wet/dry while OCV (Open Circuit Voltage) holding. The problem of this protocol is that it is highly affected by electrode degradation due to change cycles in OCV and that the evaluation time is long. By using oxygen instead of air as the cathode gas while leaving the other conditions of the DOE protocol as it is, the durability evaluation time could be reduced from 408 hours to 144 hours. By reducing the number of voltage change cycles to 1/3, the electrode degradation due to the voltage change cycle was reduced to 1/12 when oxygen was used compared to air at the end, thereby enabling more accurate evaluation of polymer membrane durability.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.3
• /
• pp.116-126
• /
• 2021

Diesel particulate filter (DPF) is a typical application field of cordierite (Mg₂Al₄Si₅O₁₈) honeycomb. Green body for DPF honeycomb was extruded using slurry paste and sintered at the temperature range of 980~1450℃. Quantitative crystal phase analysis was carried out by using Rietveld refinement method for powder XRD data. In conjunction with the quantitative Rietveld analysis, SEM-EDS analysis was carried for the crystal phases (indialite, cordierite, cristobalite, alumina, spinel, mullite, pro-enstatite). After removing amorphous phase on the sintered surfaces by chemical etching method, the shape and composition of the crystal phases can be clearly identified by SEM-EDS method. By combining the Rietveld refinement method and SEM-EDS analysis, crystal phase evolution process in DPF cordierite ceramics could be clarified. In addition, the coefficient of thermal expansion (CTE) of the DPF honeycombs were measured and compared with the calculated CTEs based on the quantitative crystal phase analysis results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.55-62
• /
• 2021

In order to improve fuel economy and reduce CO2, HEV adopts ISG system as a standard. This ISG system increased the electric load that the battery had to bear, and the number of starting increased rapidly. AGM Lead Acid batteries have been developed and used, but the charging time is about three times longer as the electrolyte amount control during formation must be maintained at a higher level compared to conventional lead-acid batteries. In this study, we tried to shorten the charging time by increasing the charging efficiency through the optimization of the formation pattern. In order to optimize the Formation Pattern, 10 charging steps and 6 discharging steps were applied to 16 multi steps, and the charging current for each step was controlled, and the test was conducted under 4 conditions (21 hr, 24 hr, 27 hr, 30 hr). As a result of simultaneous application of multi-step and discharge step, it was verified that minimizing the current loss and eliminating the sudden polarization during charging contributes to the improvement of charging efficiency. As a result, it showed excellent results in reducing the charging time by about 30 % with improved charging efficiency compared to the previous one.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2021

The objective of this work is to prove a possibility of void f illing through a carbonation f or the purpose of improving the quality of recycled aggregate. Carbonation can permanently immobilize CO2, which is a greenhouse gas, and thus provides additional benefit on environment. In this work, recycled fine aggregate was reacted using gaseous CO2 and supercritical CO2(scCO2) in a closed chamber, and the changes in physical properties of the recycled f ine aggregate bef ore and af ter carbonation were analyzed using the apparent density, skeletal density, pH, and FE-SEM measurements. Thereafter, a mortar specimen was prepared and a compressive strength was measured. According to the experimental results, it was found that the increase in the apparent density and the true density was higher by the reaction with scCO2, which was conducted at high temperature and high pressure compared to the reaction with gaseous CO2. In addition, the pH of the eluted water was found to have a larger initial decrease than that observed with samples from reaction by gaseous CO2. The shape and amount of calcium carbonate crystals were also found to be larger than that from gaseous CO2. The increase in compressive strength was the largest when using recycled fine aggregate reacted with scCO2. It was clear that quality improvement of recycled fine aggregate was higher with scCO2 than with gaseous CO2.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.75-81
• /
• 2022

Given that China's resource research, exploration and development and resource economy policies are closely related to Korea's industrial competitiveness in the field of global mineral energy resources, it is important to establish the domestic and overseas resource development strategies. In 2020, China will revise and set standards for mineral resources to ensure efficiency in exploration and development and storage management. China's Ministry of Natural Resources has established the National Mineral Resources Plan (2021-2025), aiming to achieve national goals and strategies, and local governments at all levels are also establishing and implementing regional mineral resources plans. As a result, the supervision and management of geological mineral exploration activities have been strengthened, and the safety of industrial production management in the field of geological mineral exploration and development has been strengthened. China has developed guidelines for high-quality geological exploration, surveying and mapping, improved the level of geological mineral exploration and strengthened the mining supervision and management system. According to China's standardization of mineral resources such as solid mineral resources and petroleum gas mineral resources, a new standard system for resource management will be established in China to improve scientific understanding, rational management and utilization.