• Journal of the KSME
• /
• v.55 no.9
• /
• pp.36-40
• /
• 2015

이 글에서는 군산복합화력의 가스터빈 구성부품 중 고온에서 운용되는 Ring Segment 1,2단 국산화 사례를 소개하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.41-44
• /
• 2008

In this paper, the gas generator using hydrogen peroxide catalytic decomposition was designed for turbine generator operation. The gas generator used 90wt% rocket-grade of hydrogen peroxide and manganese dioxide as a catalyst. Turbine generators utilizing gas generators were investigated and the prestudy was prepared using automobile turbocharger instead of turbine generator.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.405-406
• /
• 2008

Combustor is one of the major component of gas turbine engine and its development is done mostly by performance test. Combustors for aviation gasturbine engines has been successfully tested at the test facility in KARI as well as for stationary gasturbine engines. Full scale combustor test requires large amount of high temperature and pressure air, so the test facility is equipped with big air compressor and heater.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.285-288
• /
• 2006

Genetic Algorithms(GA) which searches optimum solution using natural selection and the law of heredity has been applied to teaming algorithms in order to estimate performance deterioration of the aircraft gas turbine engine. The compressor, gas generation turbine and power turbine are considered for estimation for performance deterioration of a complex component at design point was conducted. As a result of that, complex defect diagnostics has been conducted. As a result, the accuracy of diagnostics were verified with its relative error with in 10% at each component.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.1015-1022
• /
• 2013

This study simulates the operation of a 200 kW class micro gas turbine that is currently under development. The performance and operating characteristics depending on the load control scheme (constant turbine inlet temperature versus constant turbine exit temperature) and ambient condition were investigated using detailed component performance data. The sensitivities of operating parameters, such as the compressor surge margin and flow path temperatures, according to unit fuel flow change were predicted for a wide load range. The sensitivity analysis showed that the steady state calculation provided useful information about the maximum surge margin reduction during load change.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.4
• /
• pp.45-54
• /
• 2009

An exergy analysis is carried out for the regenerative steam-injection gas turbine systems which has a potential of enhanced thermal efficiency and specific power. Using the analysis model in the view of the second law of thermodynamics, the effects of pressure ratio, steam injection ratio, ambient temperature and turbine inlet temperature are investigated on the performance of the system such as exergetic efficiency, heat recovery ratio of heat exchangers, exergy destruction, loss ratios, and on the optimal conditions for maximum exergy efficiency. The results of computation show that the regenerative steam-injection gas turbine system can make a notable enhancement of exergy efficiency and reduce irreversibilities of the system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.549-554
• /
• 2011

Recently, technical advances have been made in high efficiency gas turbine power plants. In domestic gas turbine facilities, the material properties of the blade and vane are degraded by the daily start-stop operations arising from the thermo mechanical cycle. We surveyed the time dependent degradation of the HP blade and vane to gather basic data for life assessment and damage analysis. The EOH(equivalent operating hours) of the blades were 23,686, 27,909, and 52,859 and the EOH of the vanes were 28,714 and 52,859, respectively. With increased operating hours, the shape of the primary ${\gamma}$' precipitate transformed from cubic to spherical, and its average size also increased. The leading edge area of the blades and the center of the vanes had the worst morphology, and this tendency agrees with the microhardness results. The thickness of the thermally grown oxide at the outer surface of the bond coat increased with increased operating hours.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.167-170
• /
• 1996

석탄의 고압 유동층연소는 기존의 PC 보일러보다는 저온 연소로써 NOx의 발생이 억제되며 탈황제를 동시에 주입하여 SOx 발생을 줄일 수 있는 것이 큰 잇점으로서 석탄 신에너지 개발에 유력한 시스템이다. 본 시스템에서 집진은 연소가스 중의 입자가 고온고압에서 고속으로 터빈에서 충돌될 때 일어나는 터빈의 마모, 침식, 및 부식 등을 방지하기 위하여 필수적이다. PFBC 연소기에서 연소된 가스가 정제후에 바로 가스터빈에 주입되기 때문에 PFBC의 집진은 매우 가혹한 조건이다. 뿐만 아니라 차세대에 더욱 높은 열효율 향상과 가스터빈의 수명 연장을 위하여 집진조건이 더욱 가혹해지고 엄격해질 전망이다. 그 동안 PFBC 집진의 연구가 다방면으로 진행되고 있으나 상용화를 위한 준비가 아직 갖추어지지 않았으며 모든 집진 시스템이 잠정적인 문제점을 갖고 있다. 그 중에서도 세라믹 캔들 필터는 성능이 우수하고 가장 많은 운전경험을 갖고 있기 때문에 가장 가까운 시기에 상용화에 성공할 수 있는 집진 시스템이다. 본 고에서는 세라믹 캔들필터 개발의 현황과 핵심 개발과제에 대하여 논의코자 했다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.2
• /
• pp.26-30
• /
• 2000

In this paper, we obtain a mathematical model of a gas turbine control system from experimental data. The gas turbine in Gunsan power plant is selected as controlled system. The recursive least square algorithm is used to model the plant. For parameter estimation, plant is assumed as second order system and forgetting factor is 0.98 and the period of input and output signal period is 1sec. As a result, input and output characteristics of real system and modeling are identified.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.1
• /
• pp.29-39
• /
• 2010

The system performance of the regenerative gas-turbine cycle with the steam injection into the combustor has been studied through the thermodynamic cyclic analysis. The effects of the pressure ratio, the steam injection ratio, the ambient temperature, and the turbine inlet temperature are investigated on the thermal efficiency, the fuel consumption, and the specific power as well as the operating conditions for the maximum thermal efficiency of the system. The results of the present analysis find that the use of steam injection in the regenerative gas-turbine system can greatly enhance the thermal efficiency and the specific power of the system.