• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2012

An experimental study was carried out to observe the characteristics of impingement of assist gas from a rectangular supersonic nozzle on kerf surface in laser machining. A micro-scale supersonic (Mach number 2.0) rectangular nozzle system was designed and fabricated for the purposes, and hot tests of the performance of the nozzle system was proceeded in the ITI corporation laboratory. For various related parameters such as laser powers, nozzle pressures and cutting speeds, the quality of the frontal view of cut edge surfaces was observed by a microscope. In the study, it was shown that the application of the present micro-rectangular supersonic nozzle in an off-axis configuration made it possible to cut a mild steel, by combinations of relatively low laser - powers, large standoff distances, and assist gas with no oxygen, which was not achieved by conventional laser cutting processes.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.54-59
• /
• 2006

A safety device with shut-off function was developed for preventing intentional accidents that might happen by separating of cutting hoses connected to pressure regulators used in residential LP gas facility. For the verification of function and field adaptability, the safety device with shut-off function was tested in the state of joining the device to the regulator and a field test was carried out at home. This study shows that, at the inlet pressure of 0.07-1.56 MPa, the device shuts off the gas within the 5m length of hose regardless of the installation condition of the regulator. The shut-off flow rate increases in the order of perpendicular upward, horizontal and perpendicular downward. From the results of the field tests carried out at home for 5 months, there appears no problem using a gas range or a boiler. If the developed shut-off device is commercialized and distributed in the market the intentional accidents occurred by cutting or separating hoses can be prevented remarkably.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.61-67
• /
• 2006

We developed the ultrasonic phased array technique for obtaining ultrasonic images of electrofusion joints of polyethylene piping. And we inspected 4 cases at fields with this technique. First case is for the 300 mm diameter polyethylene electrofusion joint by using 3.5 MHz phased array sensor, second is for the 350 mm diameter saddle electrofusion joint, third is for the 400 mm diameter electrofusion joints and the last one is for the 400 mm diameter piping joints which will be used at 300 kPa suppling pressure.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.126-127
• /
• 2004

• IE interfaces
• /
• v.9 no.3
• /
• pp.283-297
• /
• 1996

The 'flat-bar' is a stiffener which is a component of ships. It is basically a long rectangle and has 'end-cut' shapes at both sides. The paper describes a fast nesting algorithm of the flat-bar, and a procedure to generate cutting path of gas/plasma torch, which is operated by a NC (numerically controlled) gas/plasma cutting machine. Proposed procedures are written in C-language and executable on VAX machine with Open VMS operating system.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.363-364
• /
• 2016

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.323-328
• /
• 2001

Supersonic coaxial, axisymmetric, jets issuing from various kinds of dual coaxial nozzles were experimentally investigated. Four different kinds of coaxial, dual nozzles were employed to characterize the major features of the supersonic, coaxial, dual jets. Two convergent-divergent supersonic nozzles with an impinging angle in the jet axis of the annular jets were designed to have the Mach number 2.0 and used to compare the coaxial jet flows with those discharging from two sonic nozzles. The primary pressure ratio was changed in the range from 4.0 to 10.0 and the assistant jet ratio from 1.0 to 4.0. The results obtained show that the assistant jets from the annular nozzle affect the coaxial jet flows and an increase of both the primary jet pressure ratio and assistant jet pressure ratio produces longer supersonic length of the dual, coaxial jet.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.308-313
• /
• 1996

The appropriate drying method in medicinal compounds and color of peony root was that predrying at briquet fire $(40{\sim}60^{\circ}C)$ for 6 hours or more, and then hot air drying at $40^{\circ}C$ during 60 hours. But this method needs too much time in drying. And the method that drying at $40^{\sim}C$ with hot air drying has bad result in color. In case Peony was seld by cutting product, before cutting, the Peony root was retted for 30 min. and sealed for 12 hrs. is good for drying time, Peoniflorin content and commodity.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.202-207
• /
• 2010

The effects of ultrasound treatment, in combination with ascorbic acid, on the quality of fresh-cut 'Jonathan' apples was investigated. Prepared apple slices were ultrasonicated in distilled water (US) or in 1%(w/v) ascorbic acid solution (UA) and the other samples were just dipped in 1%(w/v) ascorbic acid solution (AA). All samples were stored at$10^{\circ}C$ for 12 days. UA-treated samples showed high $L^{*}$ and hue values and low $a^{*}$, $b^{*}$, chroma, and ${\Delta}E$ value. Both control and US-treated samples showed considerable browning. A significant inhibition of polyphenol oxidase activity was observed after UA treatment. The level of total phenolics in UA-treated samples was higher on the day of treatment compared with other samples. Total soluble solids, pH, titratable acidity, and gas concentrations were similar in all samples. This study demonstrated that the simultaneous treatment of ultrasound and ascorbic acid was effective in preventing enzymatic browning of fresh-cut 'Jonathan' apples and maintaining total phenolics contents.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.35-46
• /
• 2022

While the construction of dismantling the old industrial complex and restoring the dismantled industrial site to its original natural environment the is underway. In this paper, we introduce a case of dismantling a turbine building which one of the a large steel frame structures in an old industrial complex by applying the progressive collapse method among the blasting demolition methods. We used a charge container that generates a metal jet to cut dismantling the turbine building. The thickness of the steel structure was adjusted to 30 mm or less by applying gouging, which was a method of digging deep grooves by gas and oxygen flames or arc thermal, in the part where the cutting thickness was thick in the blasting section. The total amount of charge used for the blasting of turbine building was 175 kg, 165 electronic detonators and 124 charge containers. As a result of the blasting demolition, the turbine building was collapsed precisely according to the estimated direction. The blasting demolition was completed without causing any damage to the surrounding facilities.