• The korean journal of orthodontics
• /
• v.39 no.3
• /
• pp.159-167
• /
• 2009

Objective: This study investigated the onset, peak height velocity (PHV) and end of adolescent growth spurt as well as menarcheal timing deduced from surveying accumulative height growth over many years. Methods: Ninety six students of Samgoe high school between 1st and 3rd grade that were in good health participated in the research. A survey questionnaire was distributed to examine the students' health status and menarche timing. Results: Adolescent growth spurt typically began at the age of 9.9 and reached a PHV at the age of 11.6. The growth spurt ended at the age of 14.1 on average. The average age of menarche was 12.6 years, which was about one year after the PHV of adolescent growth spurt. In most cases, menarche came after PHV. But in 24% of the students, menarche and PHV was nearly coincident or menarche preceded PHV. The growth curves were classified into four types. A typical adolescent growth spurt showed one PHV on graph that drastically drops after the PHV. However, there were cases with two PHVs. Conclusions: The results indicate that individual growth patterns show large individual differences, however the categorization into the various growth curves may aid in predicting individual growth patterns.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.331-337
• /
• 2001

The purpose of this study is to analyze the principal causes of vibration problem and find out the method of vibration reduction in a chip-mount system. The principal causes are investigated through measurements of vibration spectrum and model parameters. Modal parameters are obtained by using an experimental model test. Based on the model parameters from experiments. a model of finite element method is formulated. The model presents effective redesign of increasing the natural frequencies in order to reduce the vibration of a chip-mount system. Further, through computer simulation for the behavior of head to be main vibration source, the best acceleration pattern of head movement can be verified to achieve effective head-positioning and reduce the vibration due to head movement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.97-102
• /
• 1988

The strain release associated with historical and instrumental earthquoke data are analyzed. In addition, the relationship between engineering intensity and cumulative frequency of earthquake occurrence is investigated. Based on the study, a seimic zoning map of the Korean peninsula is constructed. For each seismic zone, a peak ground acceleration value is determined for the aseismic designs of two types of structures. First type is general structures like buildings and the second type is special structures like nuclear power plants.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.258-263
• /
• 2005

The nearest variety of the industrial world requires using the high precision and resolution positioning technology to do a semi-conductor, information field , and measurement field. It is especially important for the positioning technology that makes up a proper controller, is affected by the minimal heat and vibration, and can control a structurally generated non-linear friction factor to determine the efficiency of the system. The paper is to analyze the vibration characteristic according to the speed of linear motor and grasp the dynamic characteristic through the modal test and show the verification of the experimental result and design parameters by using FEM(Finite Element Method). Also, it shows the optimum standard analyzed the acceleration patterns of the moving part that lead to the vibration source in linear motor. It presents the analyzed dynamic of linear motor in compliance with a change of the non-linear factor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.254-259
• /
• 2005

The heat and vibration effect is known to cause a serious deformation in linear motor system. The paper presents a heat and vibration characteristics that compare a advanced linear motor with developed linear motor through experiment and analyses. The heat in linear motor system is identified for experimental data and analytic data using the Finite Volume Method (FVM). Also, it shows that the optimum standard analyzed the acceleration patterns of the moving part cause the vibration source in linear motor. It presents the analyzed dynamics of linear motor in compliance with a deformation of the non-linear factor.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.1100-1103
• /
• 2014

본 논문에서는 웨어러블 장치에서 펜 형태 또는 손가락 부착 형태의 입력 인터페이스로 사용할 수 있는 3D 온라인 필기인식 시스템을 제안한다. 3 축 가속도 센서와 자이로 센서를 장착한 입력 인터페이스를 사용하여 사용자는 손의 움직임을 통해 웨어러블 기기 또는 스마트 기기에 문자를 입력할 수 있다. 본 연구에서 제안하는 3D 필기인식 시스템은 필기 경로를 복원하여 획을 추출하고, 3 차원 공간의 필기문자에서 나타나는 기울임이나 왜곡, 겹쳐 쓰기를 고려한 특징점 추출 과정을 거친다. 추출한 특징점을 2 단계 결정 트리의 입력으로 사용하여 사용자가 공간상에서 필기한 알파벳을 인식한다. 10 명의 사용자에게 3 회의 필기 데이터를 입력 받아 총 780 개의 문자를 인식한 결과, 87.69%의 인식률을 얻을 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.840-845
• /
• 2004

Development of the linear motors is recently required to control a high-speed and high-resolution in the high-integrated and speed process industry. This paper presents vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the vibration characteristics of the advanced products. Vibration experiments are conducted for identifying vibration level during operation. They are also included in the modal test to analyze dynamic characteristics. Analytic data using Finite Element Method (FEM) are compared with the results of the modal. The FEM and experiments make it possible to understand these characteristics. Further, through computer simulation for the behavior of moving part to be vibration source, the best acceleration pattern of moving part movement can be verified to achieve effective moving part positioning and reduce the vibration due to moving part movement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1381-1384
• /
• 2005

In these days, the piezoresistive material has been applied to various sensors in order to measure the change of physical quantities. But the relationship between the sensitivity of a sensor and the position and size of piezoresistor has rarely been studied. Therefore, this paper was focused on the distribution of the resistance change ratio on the diaphragm and bridge surface where piezoresistor would be formed, and proposed the proper size and position of piezoresistor with which the sensitivity of sensor was increased. As the width of mass and boss was increased, the distance between piezoresistors was closed and the maximum value of resistance change ratio was decreased by the increase of the structure stiffness. And according to the increment of seismic mass size, the value of resistance change ratio is decreased by increase of the structure stiffness. Y directional piezoresistor is formed in the position of $100\mu{m}\;apart\;from\;cantilever\;edge\;and\;length\;of\;that\;is\;800\mu{m}$.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.543-546
• /
• 2007

Flow visualization is one of visualization techniques and it means a visual expression of vector data using 2D or 3D graphics. It aims for human to easily find and understand a special feature of the vector data. The Image Based Flow Visualization (IBFV) is one of the fastest technique in the dense integration based flow visualization techniques. In this paper, IBFV is accelerated and implemented using commodity GPU. Especially, mesh advection is accelerated at the vertex program.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.343-346
• /
• 2006

스마트 홈서비스가 이루어질 앞으로의 가정에서는 거주자의 편리를 추구하는 다수의 가전기기와 다양한 장치를 통해 여러 형태의 서비스가 제공된다. 그 환경의 중심에서 사용자는 무엇보다 손쉽고 편리하게 이들을 시용할 수 있어야 한다. 기존에는 사용자가 쉽게 휴대할 수 있는 소형 컴퓨터, PDA, 휴대폰을 이용해 스마트 홈서비스를 제어하는 연구가 이루어지고 있다. 하지만 이들을 사용하는 것은 복잡하면서 전문적인 지식이 필요할 수 있으며 항상 결에 두어야 한다는 불편함이 있을 수 있다. 이에 본 논문에서는 관성센서를 이용한 동작인식 시스템을 개발하였다. 이 시스템은 자이로 센서와 가속도 센서를 사용하며 3축의 자이로(각속도) 및 가속도를 측정할 수 있는 센서 모듈과 측정된 데이터를 이용해서 동작 패턴을 분류해 주는 알고리즘으로 구성된다. 차후에 홈 네트워크 시스템과의 결합을 통해 미리 지정된 간단한 손동작만으로 여러 가전기기를 제어할 수 있을 것이며 특히 노약자나 장애인들이 기존의 리모트 컨트롤 등의 복잡한 제어 장치를 대신해서 간편하고 손쉽게 사용할 수 있을 것이다.