• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.778-784
• /
• 2002

Chemical modification of a dextran film to improve its physical properties was carried out by addition of plasticizers and crosslinking agents. Moreover, low-temperature plasma treatment with acetylene gas was done. The dextran film showed high mechanical strength but was brittle and vulnerable to moisture. When plasticizer was added, it became very soft but with large reduction of mechanical strength. However, a flexible film with fairly high mechanical strength and water resistance was prepared when the film was crosslinked by adding crosslinking agent with or after the addition of plasticizer. Treatment with an acetylene plasma changed the dextran film surface from hydrophilic to hydrophobic with little influence on the bulk properties of the film.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.537-544
• /
• 2001

뮬라이트, 지르코니아, 뮬라이트/지르코니아 비수성 현탁액의 분산 및 레올로지에 미치는 공정보조제의 영향이 침전밀도, 점도, 입자크기를 측정함으로써 검토되었다. 현탁액의 분산안정성 (높은 침전밀도와 낮은 점도로 특징 된)은 분산제+가소제+결합제를 함유하는 경우에 비하여 분산제 또는 분산제+가소제를 함유하는 경우가 우수하였다. Ball mulling 후의 입자크기분포는 공정보조제의 종류에 거의 영향을 받지 않았다. 결합제를 부가적으로 함유하는 현탁액은 상대적으로 강한 shear thinning 거동을 나타내었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.167-172
• /
• 2019

The strength (MPa), hardness (Hv), shrinkage (%) and biological properties of the HAp were measured by using an organic plasticizer which facilitates the molding and heat treatment. Mechanical properties such as compressive strength, bending strength and hardness were increased with increasing amount of plasticizer, but mechanical properties were decreased when plasticizer was added more than 7 %. This is because addition of the plasticizer above the allowable value causes cracking during molding, and such cracks promote the generation of microcracks and pores at the time of sintering, resulting in a decrease in mechanical properties. As a result of the antimicrobial activity test, no bacteria were detected regardless of the addition amount of plasticizer.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1285-1294
• /
• 1998

Whey powder, a by-product of milk industry, was utilized to produce biopolymer film with the combination of film matrix supporting material, sodium caseinate. Biopolymer films were prepared from whey powder-sodium caseinate mixtures at several mixing ratios. The effects of pH, plasticizers and cross-linkers on tensile strength (TS) and elongation (E) of films were investigated. The films could be formed by use of whey powder up to 70%. As the whey powder content was increased, TS of the film decreased while E increased. Films containing more than 70% of whey powder could not be formed due to the stickiness of lactose in whey powder. The optimum pH of the film solution was found to be 10. Among the plasticizers tested, sorbitol was found to be the most effective plasticizer while glycerol was inadequate for the film. Tensile strengths of films containing $30{\sim}40%$ whey powder were higher than 10 MPa with relatively high E, when the films were plasticized with 30% (w/w) and 40% sorbitol. TSs of the relatively weak films containing $50{\sim}60%$ whey powders were improved by the addition of small amount of sodium citrate for 30% sorbitol plasticized films, and by the addition of sodium chloride for 40% sorbitol plasticized films. It was concluded that up to 70% of whey powder could be utilized to produce biopolymer films by adding sorbitol and cross linkers at pH 10.

• Elastomers and Composites
• /
• v.14 no.1
• /
• pp.46-51
• /
• 1979

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.11-17
• /
• 2016

BTTN and TMETN are representative energetic plasticizers used for various propellants. However these compounds are sensitive relatively. So, in order to develop insensitive energetic plasticizer, this study attempted to synthesize derivative of triazole, 4,5-bis(azidomethyl)-(2-methoxyethyl)-1,2,3- triazole (DAMETR). Also, the prepared compound was characterized by NMR, IR spectroscopy, and physicochemical properties such as glass transition temperature, melting point, decomposition temperature, density, viscosity and impact sensitivity. In addition, the heats of formation (${\Delta}H_f$) and detonation properties (pressure and velocity) of DAMETR were calculated using Gaussian 09 and EXPLO5 programs. Especially, 1-DAMETR(>50 J) was more insensitive than BTTN(1 J) and TMETN(9.2 J).

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.399-402
• /
• 2005

In this study, ethyl cellulose (EC)/montmorilloniote(MMT) nanocomposite films plasticized with environmental-friendly plasticizer (BET, EBN, ESO) were prepared by melt process using Hakke mixer. The $T_g$ of plasticized EC films decreased from 122 to $71^{circ}C$ with the increase in the BET content up to 30 $wt\%$. The addition of 10 $wt\%$ epoxidized soybean oil (ESO) as the second plasticizer cause the further drop of $T_g$ from 81 to $61^{circ}C$. The plasticizer-effect of BET was better than that of EBN. When the plasticizer was added into the EC films, the mechanical properties of EC films was decreased, however the addition of monotmorillonite (MMT) into the EC films or the ring opening reaction of ESO plasticizer cause enhancement of mechanical properties.

• Korean Journal of Environmental Biology
• /
• v.35 no.1
• /
• pp.21-36
• /
• 2017

Phthalates, known as typical endocrine disruptors, are plasticizers used to soften plastics such as polyvinyl chloride (PVC). Because of their material properties, phthalates are used extensively in the production of toys, flooring, wood processing, detergents, and even cosmetics as lubricants and perfume solvents. Due to their endocrine disrupting effect and other adverse health effects published, recently, phthalates have been regulated in many countries. Besides, in an effort to replace phthalates, several chemical plasticizers such as trioctyltrimellitate (TOTM) and dioctylterephthalate (DIOP) have been used instead of the existing harmful phthalates, and novel alternatives are continuously being developed. Nonetheless, phthalates are still being detected in several plastic products, and the safety of alternatives that are considered safe is being questioned. In this review, we describe the adverse health effects of phthalates, their regulation and the current status of their alternatives.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.73-80
• /
• 2011

In order to develop the environmental-friendly new materials based on soybean protein which is plantable macromolecule, thermal characteristics of the soybean protein resin (SPI) modified by plasticizers (1,3-propandiol, glycerol) and cross linking agents (glutaraldehyde, epichlorohydrin, glyoxal, urea) were analyzed by TGA. Mechanical properties of modified SPI were investigated and fracture was observed by SEM. As the result, flexibility of SPI film was increased by adding plasticizers; 1,3-propandiol and glycerol. Plasticization effect of glycerol was relatively greater than that of 1,3-propandiol. With the application of crosslinking agents (glycerol, epichlorohydrin and glyoxal), strength and thermal stability of SPI increased with their content. On the other hand, in case of addition of urea, thermal stability of SPI decreased and its strength was reduced because cross-linking between urea and SPI was somewhat difficult. Fracture surfaces and domain interfaces of the modified SPI resins were observed with SEM.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.309-312
• /
• 2008

We have prepared the silicone sealant using non silicone oil without silicone oil for solvent and using adhesion promotor against various substrate. We are replaced the silicone oil by the mineral oil and the normal adhesion promotor by mixed adhesion promotor at the multi purpose silicone sealant.