• Journal of the Korean Geosynthetics Society
• /
• v.14 no.3
• /
• pp.13-20
• /
• 2015

Inappropriate backfill material and poor compaction cause the damage to sewer and ground settlement. To deal with such problem, flowable backfill material has attracted attention recently. A basic study was conducted in a bid to obtain optimum mixing ratio of backfill material with the characteristics of rapid hardening, pseudo-plasticity, flowability and anti washout ability and enhance the cost efficiency of backfill material. Through the test of optimal mixing ratio of rapid hardening, evaluation of optimal mixing ratio of backfill material was conducted. As a result, required performance as well as cost efficiency could be achieved by adjusting plasticizer even in case of increasing W/M of the paste of rapid hardening to 100%.

• Annals of Clinical Neurophysiology
• /
• v.13 no.1
• /
• pp.38-43
• /
• 2011

Background: In the brain, the dominant primary motor cortex (M1) has a greater hand representation area, shows more profuse horizontal connections, and shows a greater reduction in intracortical inhibition after hand exercise than does the non-dominant M1, suggesting a hemispheric asymmetry in M1 plasticity. Methods: We performed a transcranial magnetic stimulation (TMS) study to investigate the hemispheric asymmetry of paired associative stimulation (PAS)-induced M1 plasticity in 9 right-handed volunteers. Motor evoked potentials (MEPs) were measured in the abductor pollicis brevis (APB) muscles of both hands, and MEP recruitment curves were measured at different stimulation intensities, before and after PAS. Results: MEP recruitment curves were significantly enhanced in the dominant, but not the non-dominant M1. Conclusions: These results demonstrate that the dominant M1 has greater PAS-induced plasticity than does the non-dominant M1. This provides neurophysiological evidence for the asymmetrical performance of motor tasks related to handedness.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.309-312
• /
• 2008

We have prepared the silicone sealant using non silicone oil without silicone oil for solvent and using adhesion promotor against various substrate. We are replaced the silicone oil by the mineral oil and the normal adhesion promotor by mixed adhesion promotor at the multi purpose silicone sealant.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.50-54
• /
• 1998

In order to obtain desired electromagnetic propertieι high initial permeability and good frequency dependance of initial p permeability, the adding effects of sevral seeds were experimented in Mn-Zn ferrite system. As adding seed grams, calcined at sintering temperature, abnormal grains were disappeared clearly but the density and the initial permcability of sintered Mn-Zn ferrite body were decreased. On the contrary, in case of adding seed rains which were calcined below the calcination temperatnre of matrix particle, abnormal grains remained but the initial permeability was increas$\xi$d with proper s$\xi$ed content. W With proper seed content, the initial permeability was increased by 10-20% but tbe $\alpha$ltoff frequency was not changed.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.70-74
• /
• 2006

Plasticized cellulose diacetate(CDA) was prepared by homogenizing cellulose diacetate(CDA), triacetin(TA) and epoxidized soybean oil (ESO) in a high-speed mixer, then the CDA mixture was mixed with ramie fiber to produce a green composite material. In DMA analysis, the glass transition temperature of plasticized CDA and the composite was observed at $85\;^{\circ}C\;and\;140\;^{\circ}C$, respectively. A composite reinforced with alkali treated ramie fiber exhibited significantly higher mechanical properties, such as $15\;^{\circ}C$ increase in tensile strength as well as $41\;^{\circ}C$ increase in Young's modulus when compared with commercial polypropylene. In the SEM image analysis, much enhanced adhesion between plasticized CDA and alkali treated ramie fiber (AIRa) was observed.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.433-442
• /
• 1996

Electrochemical characteristics and physical properties of polymer electrolyte which immobilized lithium salts such as $LiClO_4$ and $LiCF_3SO_3$ and plasticizers such as ethylene carbonate(EC) and propylene carbonate(PC) in high molecular weight poly(ethylene oxide)[PEO] polymer was investigated. PEO-Li based polymer electrolyte with plasticizers showed ionic conductivity of $10^{-4}S/cm$ at room temperature and high electrochemical stability up to 4.5 V(vs. $Li^+/Li$), so it can be applied to lithium secondary battery. The crystallinity of PEO decreased with the addition of lithium salts and plasticizers, especially $LiClO_4$ and PC showed more effective than and $LiCF_3SO_3$ and EC. Glass transition temperature($T_g$) of polymer electrolyte increased with increasing lithium salt concentration whereas melting temperature ($T_m$) decreased. Polymer electrolyte with plasticizers crystallized at $6^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.582-586
• /
• 1999

The processing conditions for producing and edible alginate film from sea tangle were investigated by measuring water vapor permeability (WVP), tensile properties and colors of film. The alginates were extracted with $3\%$ sodium carbonate ($Na_2CO_3$) solution for 5 hrs, and the alginate films were prepared with extracted sodium alginates, D-gluconic acid lactone, $CaCO_3$ and various plasticizers, As the concentration of alginate in making the film was increased, the WVP and elongation of the film were decreased and the tensile strength was increased. The higher amount of plasticizer showed the higher WVP and elongation, and the order of various plasticizers in increasing the WVP and elongation of the film was glycerol, polyethylene glycol, and sorbitol. The addition of sorbitol in the film showed the highest value (89.57) in lightness of Hunter color system and the film added polyethylene glycol had the highest values (-1,12 and 11.4) in redness and yellowness.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.567-573
• /
• 2005

Compatability of films made of chitosan, gelatin, and their blends prepared by aqueous solution casting was investigated using a thermogravimetric analyzer(TGA) and a dynamic mechanical analyzer (DMA). TGA showed gelatin is more thermally stable than chitosan, and thermal stability of chitosan in blends was higher than that of pure chitosan due to interaction among functional groups of component polymers in blend. Glass transition temperature $(T_g)$ of blends was dependent on chitosan content of blends. Blend films exhibited good miscibility. Moisture and glycerol contents of blend strongly affected thermal properties of two component polymers.

• Journal of Korea Game Society
• /
• v.11 no.6
• /
• pp.23-31
• /
• 2011

The cognitive abilities are functions in human brain. They are closely with the real life. The cognitive abilities are likely to be decreased when human gets older and older. Fortunately, due to the plasticity of human brain, it is possible to help recover and rehabilitate brain function. Those efforts are called brain training and cognitive ability training. The cognitive ability training needs continuous trials and efforts. But many users feel boring because of simple repetitive works. This paper proposes a cognitive training system implemented in a smart device. The proposed system is designed to make users to focus on the repetitive training by using game-based tasks on the smart device. It shows that the proposed system is effective to attention and flexible on cognitive training game.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.15-22
• /
• 1996

FET type $Ca^{2+}$ sensor(Ca-ISFET) was fabricated by micropool and photolithographic method utilizing photosensitive polymer as membrane materials. When OMR-83 negative photoresist was used as membrane material, it gave good sensitivity by micropool method with dioctyladipate as plasticizer but it could not be used in the photolithographic method. When poly(viny1 butyral), PVB was used as membrane material, it gave relatively high sensitivity ($23{\pm}0.2\;mV/decade$) for $Ca^{2+}$ concentration range of $10^{-4}{\sim}10^{-1}\;mole/{\ell}$ by photolithographic method. PVB also provided good adhesion to the pH-ISFET base device without adhesion promoter pretreatment and any plasticizer.