• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.1
• /
• pp.33-42
• /
• 2021

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.182-189
• /
• 2006

Consumers can choose suitable shoes for their feet in off-line shopping. However, in on-line shopping, because they can not wear shoes, compare to the off-line shopping, there are many problems in internet shopping. And the solution of user-oriented internet shopping is development of new type of prototype which is accessible to user and to offer visual information through 3D-virtual reality. We made this Prototype that the consumer can measure their own shoes size. And the consumer can print out their foot size in the internet database and measure their own foot size and type. And we maximized the visual experience though it is indirect and then we wanted to overcome a emotional experience in the real world. we visualized first, 'the softness' of shoes meterial, second 'the drainage' in the realtion of shoes meterial and water, third 'the close adhesion' in the realtion of shoes and consumer's their own foot and last 'the elasticity' in the relation of the shoes outer sole and surface. The result of this research can solve the problem in the existing on-line shoes' shop and it will become an alternative plan. And this prototype just will not become the localization at the on-line shoes' shop. In true sense, it will be an important example in the whole internet industry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.275-283
• /
• 2023

The progressive wear of teeth is a physiologic process of aging, but excessive wear can lead to occlusal disharmony, tooth sensitivity and pulp exposure, decreased masticatory efficiency, and aesthetic problems. It should be treated by evaluating the cause of tooth wear and establishing a stable centric relation with appropriate vertical dimension of occlusion and occlusal plane. The present case report successfully rehabilitated a full-mouth case of a severely worn dentition with the use of digital facebow transfer and virtual articulator.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.170-170
• /
• 2017

기후변화 따른 스마트팜 돈사 외부 환경의 변화에 대응하고, 사육 환경을 능동적으로 개선하기 위한 연구가 수행 중이다. 돈사 내 열전달 요소 간 상호 역학성 분석을 위해서 고려해야할 사항은 입기구, 보온 등, 열풍기, 단열제, 위치, 방향, 돈사의 연평균 온도, 습도, 연중 일사량, 가축의 열복사 등 상호 복잡하게 연관되어 있는 물리량이다. 돈사 전체 열손실, 자연발생 에너지량, 강제발생 에너지량, 난방용량 등을 고려한 순간 열부하 산정을 위한 여러 방법 중 우선적으로 CFD(Computational Fluid Dynamics)를 이용하였다. 순간 열부하 산정을 위한 해석 도구 선정에 있어서 다양한 유체 및 기체 전산 유체역학 Solver(Fluent, Open-FOAM, Blender)를 고려하였다. 공간 Mech를 수행하기 위한 도구로는 공개 소프트웨어 인 FreeFem++ 3.51-4 (http://www.freefem.org)를 이용하였다. 이 과정에서 일부 기체 (암모니아)의 농도를 난수로 변화시키는 기법을 적용하여 가상적으로 돈사의 환경을 Pseudo 시뮬레이션 하였다. 결과적으로 Fluent에 비하여 OpenFOAM을 이용하여 얻은 열유동의 방향(속도)과 크기 백터가 상대적으로 크게 나타났다. Fluent가 시계열 상에서 혼합 기체 물리량 변화를 무시할 수 있는 안정되고 균일한 환경에 적합하기 때문인 것으로 판단되었다. Blender의 경우 Lattice Boltzmann methods 과 Smoothed-particle hydrodynamics 방법을 이용한 유체/입자 동력학 모델링을 제공함에 있어 시각적 효과를 강조하는 기능에 중점을 두었다. Fluent와 Blender에서 제공하는 해석 연산 모듈의 정확성 검증을 위해선 공간 분해능을 높인 정밀 계측 시스템을 이용하여 검증할 필요가 있다. Open-FOAM를 이용한 열부하 분석 수행이 상대적으로 높은 절대값을 보이는 특성은 열부하 제어 시스템의 Overshoot를 유발할 가능성이 있으므로 이에 대한 해석 모델의 보정이 추가적으로 필요할 것이다. CFD의 한계인 시간 복잡도를 낮추고 상대적으로 높은 시계열 분해능을 확보할 경우 돈사 내 환기시스템에 맞는 소요 환기량 실시간 산정이 가능해지고 외부기상 및 돈사내부 복사열을 활용함과 동시에 돈군 순환에 상응하는 실시간 열부하 관리 시스템 도출이 가능할 것이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.282-288
• /
• 2014

Three-dimensional multimedia industry such as 3D TV, movie and broadcast has been developed vividly. For generating 3D contents with high quality, virtual auditory display, so called VAD, is being researched to offer more realistic experience to listeners. When people render VAD using headphones or two speakers, head-related transfer function(HRTF) plays a key role. The best solution is measuring all individuals' HRTFs, but it is hard to measure all listeners' HRTFs. To overcome this difficulty, many research groups have tried to construct their own measurement system and to build HRTF databases. However, some of them have not enough subjects or spatial resolution and they are mainly focused on Caucasian. There exists difference between Korean and Caucasian in a view of physical features. In other words, if Koreans hear three-dimensional sound rendered by HRTF database based on Caucasian, performance might be hindered. To verify this possibility and remedy the drawbacks, construction of new HRTF database aimed at Korean is needed. Therefore, our laboratory built HRTF measurement system which can measure HRTF of three-dimensional space with dense spatial resolution. With this system, 55 Korean males and 45 females' HRTFs were measured and Korean HRTF database was built based on these data.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.16-22
• /
• 2020

Since it is difficult for individual power producers and non-professionals who lack basic knowledge to control, manage, and operate facilities through EMS (Energy Management System), augmented reality and virtual reality monitoring systems are applied. However, in the existing systems, data access efficiency is inferior due to the process of analyzing column values for analog signal values collected from sensors and converting data after combining the columns. In addition, high-speed operation processing is difficult due to a large number of indexes for accommodating access patterns for various analog signal waveforms. Therefore, in this paper, a bitmap generator is inserted into a non-tree structure to convert the data collected from power facilities into physical property information, and the converted information is encrypted with a common key, so that the resources for the resources shared between each device are We propose a method of exchanging data for an augmented reality-based power system that is controlled by measurement.

• Journal of Korea Water Resources Association
• /
• v.46 no.10
• /
• pp.969-976
• /
• 2013

Leakage in water distribution system causes social and economic losses by direct water loss into the ground, and additional energy demand for water supply. This research suggests a leak detection model of using adaptive Kalman filtering on real-time data of pipe flow. The proposed model takes into account hourly and daily variations of water demand. In addition, the model's prediction accuracy is improved by automatically calibrating the covariance of noise through innovation sequence. The adaptive Kalman filtering shows more accurate result than the existing Kalman method for virtual sine flow data. Then, the model is applied to data from two real district metered area in JE city. It is expected that the proposed model can be an effective tool for operating water supply system through detecting burst leakage and abnormal water usage.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.468-468
• /
• 2017

최근 기후변화로 인해 수자원 위험요소인 가뭄 및 홍수피해가 증가하고 있으며, 인구증가에 따른 수량감소로 수자원관리가 더욱 어려워지고 있는 실정이다. 효율적인 수자원관리 및 기후변화 대응을 위해 세계 물시장은 점점 증가하고 있으며, 이에 따라 국내기업 또한 해외사업 진출을 추진하고 있으나, 사업에 필수적인 기상, 수문 등 기초자료의 부재로 어려움을 겪고 있다. 본 연구에서는 국내기업의 해외사업 진출 시 필요한 기상, 지형, 수문, 인문 사회 등 기초자료를 제공하는 글로벌 수자원정보제공시스템(Global Water Bank, GWB)을 설계 및 개발하고자 한다. 국내 외 예비타당성보고서 및 국내에서 수집 가능한 국외 정보현황을 분석하여 자료 제공인자를 도출하였으며, 이를 토대로 시스템 내 제공항목을 기상, 지형, 수문해석, 인문 사회, 기후변화 자료로 구분하였다. 해외시장 진출범위를 고려하여 자료의 공간적인 범위를 전지구로 설정하였으며, 전지구 자료의 가용성을 검토하여 제공자료를 구축하였다. 기상자료는 NCDC (National Climate Data Center)의 관측 지점자료와 APHRODITE (Asian Precipitation - Highly-Resolved Observational Data Integration Towards Evaluation) 격자자료를 수집하였으며, 오 결측 자료는 품질검토를 수행하여 보정하였다. 지형자료의 경우 USGS (U.S. Geological Survey)의 DEM, FAO (Food and Agriculture Organization of the United Nations)의 토양도, UMD (University of Maryland)의 토지피복도를 구축하였다. 수문자료는 GRDC(Global Runoff Data Centre)의 관측 지점자료를 수집하였으며, 미계측 지역의 수문자료 구축을 위해 VIC(Variable Infiltration Capacity) 수문모형을 활용하여 $0.5^{\circ}$ 공간해상도의 격자 유출량 자료를 생산하였다. 인문 사회자료로 World Bank의 국가별 통계자료를 수집하였으며, 구축된 각 자료는 GWB 시스템을 통해 제공된다. 시스템의 시범운영을 위해 아시아 지역을 대상으로 GWB- 버전을 개발하였으며, 시범지역 내 관측자료와 비교분석하여 자료의 활용성을 검증하였다. 추후 GWB 시스템은 해외진출 사업 우선지역 선정 근거로 활용될 수 있는 가상수 및 물산업지수 등의 추가정보를 제공하고 타 지역으로 확대적용 예정이다.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.30-34
• /
• 2019

We analyzed how the features in plasma information based virtual metrology (PI-VM) for SiO₂ etching depth with variation of 5% contribute to the prediction accuracy, which is previously developed by Jang. As a single feature, the explanatory power to the process results is in the order of plasma information about electron energy distribution function (PI_EEDF), equipment, and optical emission spectroscopy (OES) features. In the procedure of stepwise variable selection (SVS), OES features are selected after PI_EEDF. Informative vector for developed PI-VM also shows relatively high correlation between OES features and etching depth. This is because the reaction rate of each chemical species that governs the etching depth can be sensitively monitored when OES features are used with PI_EEDF. Securing PI_EEDF is important for the development of virtual metrology (VM) for prediction of process results. The role of PI_EEDF as an independent feature and the ability to monitor variation of plasma thermal state can make other features in the procedure of SVS more sensitive to the process results. It is expected that fault detection and classification (FDC) can be effectively developed by using the PI-VM.