• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.322-329
• /
• 2018

Teleoperation is defined with a master device that gives control command and a slave robot in a remote site. In this field, it is common that a human operator executes and experiences teleoperation with a virtual slave, and preliminary learns dynamic characteristic and network environment from both agents. Generally, a virtual slave has neglected forward dynamics and its kinematic model has been implemented in computer graphics. This makes a operator to experience actual feelings. This paper proposes a dynamic teleoperation model in which a robotic forward model is applied. Also, a novel compensation method is proposed to reduce the numerical error problems in forward dynamics caused by low control sampling rate. Finally, its results will be compared to the teleoperation in an actual environment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.63-71
• /
• 2000

원격조정 시스템에서 힘정보는 중요하다. 그러나 특수 응용 분야에 적합한 크기와 측정의 정확성을 가지는 힘 센서의 적용은 매우 어렵다. 더욱이 힘 정보의 전송으로 인한 시간지연으로 시스템은 불안정 되기 쉽다. 본 논문은 가상환경을 이용한 원격조정 시스템을 제안하였다. 시스템은 그래픽 시뮬레이션 처리부, 슬레이브 제어부 그리고 역감 제시부로 구성되어진다. 슬레이브 암이 작업물체와 접촉작업을 할 때 역감은 가상환경에서 계산되어지므로 힘 선세와 시간지연으로 발생되는 문제점을 해결 할 수 있다. 제안된 시스템으로 접촉작업에 대한 힘 제시 원격조정을 수행하였고, 실험결과를 통해서 안정된 접촉작업을 확인하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.301-303
• /
• 2001

본 연구는 저가의 가상현실 시스템을 구현하기 위하여 LAN에 연결된 다수의 PC들로 구성된 가상현실 시스템을 제시한다. 이때, PC들은 고유 기능에 따라 3차원 그래픽을 실시간으로 랜더링 하는 VR 서버, 가상공간의 운영을 위하여 GUI 인터페이스를 지원하는 제어 서버, 상호작용을 위하여 입출력 장치가 연결된 장치 서버로 분류한다. 제안하는 시스템의 핵심 기능은 분산된 서버들을 단일 가상공간에 통합하는 것이다. 우리는 서로 다른 특징을 가지는 서버들을 통합하기 위하여 동기 마스터/슬레이브, 이벤트 관리자, 상호 작용 관리자를 설계하고 이를 구현하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.388-394
• /
• 2003

To handle the high level radioactive materials such a spent fuel, the master-slave manipulators (MSM) are widely used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD models using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility, The 3D graphic simulator using the external input device of space ball displays the movement of manipulator. To connect the external input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result shows that the developed simulation system gives much-improved human interface characteristics and shows satisfactory response characteristics in terms of synchronization speed. This should be useful for the development of work's education system in the virtual environment.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.411-422
• /
• 2002

Recently, there have been active researches about the VPCS (Virtual Parallel Computing System) based on multiple agents. The PVCS uses personal computers or workstations that are dispersed all over the internet, rather than a high-cost supercomputer, to solve complex problems that require a huge number of calculations. It can be made up with either homogeneous or heterogeneous computers, depending on resources available on the internet. In this paper, we propose a new method in order to distribute worker agents and work packages efficiently on the VPCS based on the IBM Aglets. The previous methods use mainly the master-slave pattern for distributing worker agents and work packages. However, in these methods the workload increases dramatically at the central master as the number of agents increases. As a solution to this problem, our method appoints worker agents to distribute worker agents and workload packages. The proposed method is evaluated in several ways on the VPCS, and its results are improved to be worthy of close attention as compared with the previous ones.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.55-64
• /
• 2003

In this study, the maintenance process by the servo manipulator has been developed for the parts of the equipment, which we unable to reach out by the Master-Slave Manipulator(MSM) in a hot cell. To do this, a virtual mock-up is implemented using the iか prototyping technology. Using this mock-up, the workspace of the manipulators in the hot cell and the operator's view through the wall-mounted lead glass have been analyzed. In addition, the path planning of the servo manipulator using the collision detection function of the virtual mock-up has been established. From these, the maintenance process for the parts of the equipment, which are located at the outside of the MSM's workspace using the servo manipulator has been proposed and verified through the graphic simulation. It is revealed that the proposed remote maintenance process of the equipment can effectively be used in the real hot cell operation. It is also believed that the implemented virtual mock-up of the hot cell can effectively be applied in analyzing the various hot cell operation and enhancing the reliability and safety in a hot cell remote handling for the spent fuel management.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.668-675
• /
• 2005

With the proliferation of wireless network and the advances of the embedded systems, the traditional distributed systems begin to include the wireless embedded systems. Clock synchronization in the distributed systems is one of the major issues that should be considered for diverse Purposes including synchronization, ordering, and consistency. Many clock synchronization algorithms have been proposed over the years. Since clock synchronization in wireless embedded systems should consider the low bandwidth of a network and the poor resources of a system, most traditional algorithms cannot be applied directly. We propose a clock synchronization algorithm in wireless embedded systems, extending IEEE 802.11 standard. The proposed algorithm can not only achieve high precision by loosening constraints and utilizing the characteristics of wireless broadcast but also provide continuous time synchronization by tolerating the message losses. In master/slave structure the master broadcasts the time information and the stave computes the clock skew and the drift to estimate the synchronized time of the master. The experiment results show that the achieved standard deviation by the Proposed scheme is within the bound of about 200 microseconds.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1524-1527
• /
• 1997

로봇기술의 발달로 인하여 로봇의 활용 분야는 점차 확대되고 있으며 의료 및 재활분야에도 이용되는 추세이다. 의료분야에 이용되는 메디칼 로봇은 최소 절개 수술에 적용하는 경우 많은 이점을 얻을 수 있다는 점과 전문의사가 현장에 있기 힘든 오지나 낙도 또는 전쟁터 같은 곳에서도 원격 수술이 가능하다는 장점으로 많은 관심을 받고 있다. 원격 수술은 수술 계획, 로봇에게 환자 등록, 원격 수술 시행의 세가지 과정을 거치게 된다. 본 논문에서는 원격 수술을 위한 위 과정의 연구 동향을 기술하고 현재 본 실험실에서 수행하고 있는 연구 내용을 다룬다. 원격 수술을 위한 의료시스템을 구축하기 위해 팬-틸터 구동부를 가지 스테레어 시각 시스템을 제작하고 여기서 얻어지는 정보를 HMD에 투시하여 현장감을 느끼게 만드는 것과 수술대에서 환자를 수술하는 듯한 느낌을 제공할 수 있는 기술인 매스터 조작기와 슬레이브 조작기 사이의 힘 피드백 구현에 대해 다룬다.

• Journal of Digital Contents Society
• /
• v.5 no.1
• /
• pp.22-27
• /
• 2004

To handle the high level radioactive materials such a spent fuel, the master-slave manipulaters (MSM) are wide1y used as a remote handling device in nuclear facilities such as the hot cell with sealed and shielded space. In this paper, the Digital Mockup which simulates the remote operation of the Advanced Conditioning Process(ACP) is developed. Also, the workspace and the motion of the slave manipulator, as well as, the remote operation task should be analyzed. The process equipment of ACP and Maintenance/Handling Device are drawn in 3D CAD model using IGRIP. Modeling device of manipulator is assigned with various mobile attributes such as a relative position, kinematics constraints, and a range of mobility. The 3D graphic simulator using the extermal input device of spare ball displays the movement of manipulator. To connect the exterral input device to the graphic simulator, the interface program of external input device with 6 DOF is deigned using the Low Level Tele-operation Interface(LLTI). The experimental result show that the developed simulation system gives much-improved human interface characteristics and shows satisfactory reponse characteristics in terms of synchronization speed. This should be useful for the development of work`s education system in the environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.77-82
• /
• 2014

SD memory cards are widely used in portable digital devices, and most of them exploit NAND flash memory as their storage, so that they have a feature of storing users' important data safely with low costs. In case of using NAND flash memory as storage, however, there is no method to store users' data if memory capacity is insufficient when transferring a large volume of data. This paper proposes a virtual SD memory card system. It used a SD memory card device driver to process data requested from a host by exploiting external storage rather than by exploiting flash memory as a memory core for storing data to the SD memory card. For experiment, it used the FPGA-based SD card slave controller IP on the SMC controller with a S3C2450 ARM CPU to test.