• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2002

In this paper the Dynamic Minislot Reservation Protocol(DMRP) in which the control channel is divided into contention-less and contention minislots in order to reduce re-transmission probability in multicasting is proposed. In the network, earth node has two pairs of transceivers. A transceiver consisting of a fixed transmitter and a fixed receiver is used to control packet registration and the other transceiver is used to transmit data. Two types f transceivers for data transmission are considered : one is FT-TR(Fixed Transmitter-Tunable Receiver) and the other is TT-TR(Tunable Transmitter-Tunable Receiver). In the analysis, FT-TR and TT-TR single-hop passive star networks are compared. As results, we conclude that the DMRP protocol with dynamically divided control channel has improved the system performance such as throughput and system delay regardless of traffic type or network structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.153-159
• /
• 2005

In this paper, we propose All-Optical WDM Buffer System for resolving the contention of Packets in Optical Packet Switching System. The proposed system consists of tunable wavelength converters based on SOA, N×N AWG, and fiber delay lines. This structure can reduce ASE and cross-talk noise because the contending packets are sent and buffered through each different path determined by a wavelength routing. We also performed buffering experiment for two contending WDM optical pulses with each 50ns width, and found that the contending problem is resolved well.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.88-90
• /
• 2008

본 논문은 이중여자 유도형(DFIG) 풍력발전 시스템에서 유효전력과 무효전력을 직접적으로 제어하기 위해 가변구조제어의 일종인 스위칭 이득기반의 선형궤환(LFSG)제어기법을 제시한다. 개조된 직접전력제어기법 (DPC)과 공간벡터변조방식(SVM)은 제안하는 제어기법을 실현하기 위해 이용된다. 개조된 직접전력제어원리를 이용해서 설계된 LFSG제어기법은 널리 사용되고 있는 자속기준제어기법(FOC)에 비해서 간단한 제어구조로 강인성과 빠른 응답특성을 보인다. 시뮬레이션결과는 제안하는 제어전략의 타당성과 강인성을 확인해준다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.835-840
• /
• 2010

This study develops a variable structure controller using nonlinear surface instead of the fixed, which has been the robustness against parameter variations and extraneous disturbance during the reaching phase. reaching time of the system trajectory is faster than the fixed method. This proposed scheme has better performance than the conventional method in reaching time, parameter variation and extraneous disturbance. The effectiveness of the proposed control scheme is verified by simulation results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.105-113
• /
• 2022

In this study, a variable displacement swash plate pump supplying high-pressure hydraulic oil to control the hydraulic system of a marine engine was developed. A structural analysis was performed on the main parts of the pump to ensure the structural safety in the design. Using a pump testing equipment, performance characteristics such as no-load flow rate, load flow rate, flow rate according to the swivel angle change, flow rate with lubrication orifice, and response time according to the swivel motion were tested. Consequently, the pump was confirmed to satisfy the required specifications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.987-992
• /
• 2002

In this paper, a new clock and data recovery circuit is proposed for the application of data communication systems requiring ㎓-range clock signals. The circuit is suitable for recovering NRZ data which is widely used for high speed data transmission in ㎓ ranges. The high frequency jitter is one of major performance-limiting factors in PLL, particularly when NRZ data patterns are used. A novel phase detector is able to suppress this noise, and stable clock generation is achieved. Futhermore, the phase detector has an adaptive delay cell removing the dead zone problem and has the optimal characteristics for fast locking. The proposed circuit has a convenience structure that can be easily extended to multi-channels. The circuit is designed based on CMOS 0.25㎛ fabrication process and verified by measurement result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.50-57
• /
• 2004

For the application of structural health monitoring such as AE detection, a stabilized FBG sensor system with wide dynamic range was proposed. A tunable Fabry-Perot filter with narrow free spectral range(FSR) was used to simplify the multiplexing demodulator for FBG vibration sensors. Stabilization controlling system was also developed for the maintenance of maximum sensitivity of the sensors. In order to verify the performance of the proposed FBG vibration sensor system, we measured sensitivity, and the system showed the average sensitivity of 256 $n{\in}_{mas}/{\sqrt{Hz}}$. Finally, multi-points vibration tests using in-line FBG sensors were conducted to validate the multiplexing performance of the FBG system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.705-711
• /
• 2004

We propose novel OCDMA system with the structure of reconfigurable may encoder/decoder(RAE/ RAD), which are able to reallocate the 2-D optical codes to each subscriber and recover the transmitted data at all the receiving nodes. We have first implemented the double hard limiters composed of limiting amplifier(first hard limiter) that maintain a level of the encoded data from receiving node and AND detector(second hard limiter) for detecting the position of the encoded data and recovering the data. With the proposed system, it was successfully implemented to recover a specific channel data out of 16 code-multiplxed channels using FPGA and 4 DFB-LDs having distinct wavelengths. From experimental results, the code length resulted from increasing the number of the simultaneously connected channels has been reduced by using 2-D OCDMA multiplexed in time and wavelength instead of 1-D OCDMA. In addition, bit errors phenomenon on account of deterioration of autocorrelation peak-to-side lobe ratio is enhanced by using the double hard limiters composed of AND detector and limiting amplifiers.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2016

The research on two-wheeled inverted pendulum (TWIP) mobile robots has been ongoing in a number of robotic laboratories around the world. In this paper, we consider a robust controller design for the TWIP mobile robot driving on uniform slopes. We use a 2 degree-of-freedom (DOF) model which is obtained by restricting the spinning motion in a 3 DOF motion dynamic equation. In order to design the robust controller guaranteeing stability of the TWIP mobile robot driving on inclined surface, we propose a sliding mode control based on the theory of variable structure systems and design a sliding surface using the theory of the linear quadratic regulation (LQR). For simulation, the dynamic model of the TWIP mobile robot is constructed using Mathworks' Simulink and the sliding mode control is also implemented using Simulink. From simulation results, we show that the proposed controller effectively controls the TWIP mobile robot driving on slopes.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.15-27
• /
• 2017

CRA(Conditional Replenishment Algorithm) was proposed to improve the visual quality of SC-MMH(Service Compatible 3DTV using Main and Mobile Hybrid delivery) which is a kind of hybrid 3DTV system and has been standardized by ATSC. In SC-MMH system, reference view and additional view may have different resolutions and/or encoding methods. To reconstruct 3D view, additional view needs to be enlarged as same as reference view. Although the performance of CRA is quite satisfactory, there may exist some blocky artifacts in the enlarged view since it adopts block-shaped processing unit with quad-tree structure. In this paper, we analyze the main causes of blocky artifacts in CRA and show these artifacts can be successfully suppressed by applying the deblocking filter at receiver side.