• Journal of Practical Agriculture & Fisheries Research
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2007

New Wild Grape berry weighs approximately 3.7g, which is one fourth of the weight of the general grape wine (12.2g). The pH of New Wild Grape wine is around 3.34, which is lower by 0.3 than that (3.62) of general grape wine. It contains higher organic acids, so it has stronger sour taste. The sugar content of New Wild Grape is 17° Brix, which is higher than that (15° Brix) of general grape wine. The color of New Wild Grape is blackish, owing to the lower lightness, redness, and yellowness compared with those of general grape wine. Depending on the mixing with or without oak tree, there is little difference in the pH, organic acid, reducing sugar, and amount of alcohol after ripening for 1 year. In taste, New Wild Grape wine mixing with oak tree is evaluated better than that of the wine without oak tree. Especially, in the case of the wine mixing with oak tree's sawdust, the quality in color, taste, and smell became improved. After fermentation, the pH of New Wild Grape Wine ripened with oak tree charcoal increased from 3.82 to 3.86, as it gets more oak tree charcoal, and the organic acid decreased from 0.91㎖ to 0.86㎖. However, there is no difference in alcohol amount. Lightness in color tended to be reduced, whereas redness tended to be increased. Adding 3% of oak tree charcoal made the taste and smell improved. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal, there is little difference in the pH and the organic acid, whereas there is a little difference in those of New Wild Grape Wine without addition of oak tree charcoal. As the addition of oak tree charcoal increased, the lightness and redness became higher. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal in oak tree barre, the taste became improved.

• The Korea Journal of Herbology
• /
• v.24 no.3
• /
• pp.1-12
• /
• 2009

Objectives : The objective of this study was to compare, the potency of toxicity of Cantharidin containing dried Mylabis phalerata (MP) extract and it's modifier. Methods ： They were monitored at dosage level 2,000, 1,000, 500, 250 and 125 mg/kg, respectively. Changes of body weight, clinical signs, mortality, LD50, macroscopic changes of gastrointestinal tract and liver were observed after single oral dose of test articles with changes of serum Gastrin and Somatostatin levels. Results ： Dosage-dependent decrease of body weight and/or gains were demonstrated in dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, the body weights were significantly increased compared to that of equal dosage group of dried MP extract-dosing group. Dosage-dependently detected clinical signs in dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, these clinical signs dramatically were decreased compared to that of equal dosage group of dried MP extract-dosing group. Dosage-dependent increase of mortality rates were observed in dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, the mortalities were significantly decreased compared to that of equal dosage group of dried MP extract-dosing group. The LD50 of dried MP extract in male mice was dramaticlly increased in their modify, 265.86 vs 426.99 mg/kg. Dosage-dependently increase of number of hemorrhagic and/or erythematous spots detected in the gastrointestinal tracts of dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, these abnormal spots were dramatically decreased compared to that of equal dosage group of dried MP extract-dosing group. Dosage-dependently increase of degrees of enlargement and congestion detected in the liver of dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, these abnormal signs were dramatically decreased compared to that of equal dosage group of dried MP extract-dosing group. Dosage-dependently increase of serum gastrin levels of dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, these abnormal increase were dramatically decreased compared to that of equal dosage group of dried MP extract-dosing group. Dosage-dependently increase of serum somatostatin levels of dried MP extract-dosing groups, were also detected in modified and dried MP extract-dosing groups at 2,000 and 1,000 mg/kg-dosing group. However, below 500 mg/kg-dosing group, these abnormal increase were dramatically decreased compared to that of equal dosage group of dried MP extract-dosing group. Conclusions ： The toxicity of dried MP extract was reduced by their modify.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.165-171
• /
• 2023

Potato dry rot is one of the potato storage diseases caused by Fusarium species and is a representative pathological disorder that induced post-harvest loss during storage. Chlorpropham treatment for sprouting inhibition is mainly used for room temperature storage of potatoes for processing. In this study, the inhibitory effect of chlorpropham on Fusarium-induced dry rot of potato 'Dano'. To investigate the mycelial growth rate of the dry rot fungus (Fusarium solani Appel & Wollenw), mycelial growth was investigated in a chlorpropham (5.0, 50.4, 503.8, and 5,038 ppm) and prochloraz (0.1, 1.0, 10.0, and 100.0 ppm) medium containing F. oxysporum mycelia. Mycelia were more inhibited as the concentration of chlorpropham and prochloraz increased during incubation at 20℃, and the inhibition rate was 98.2% and 100% when treated with 503.8 ppm of chlorpropham and 10ppm of prochloraz in 14 days, respectively. Potato Dano tubers inoculated with F. oxysporum were dipped in chlorpropham (5.0, 50.4, and 503.8 ppm) and prochloraz (100 ppm) to investigate the effect of preventing dry rot during cold storage at 20℃ and 4℃ in vivo. The disease diameter of potatoes stored at room temperature (about 20℃) was reduced to 13.0 mm in the prochloraz 100 ppm teatment, and 10.7 mm in the chlorpropham 50.4 ppm treatment compared to 13.7 mm in the control tuber at 70 days of storage. The disease progression in all treatments including control was similar with no statistically significant difference at 4℃ air temperature. From the results of this study, it is considered that treatment with 50.4 ppm of chlorpropham after harvest will be useful for suppressing dry rot of stored potatoes.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.169-177
• /
• 2016

This study was carried out to compare microbiological and hygienic quality characteristics of the products reached expiration date among meat products distributing in markets. A total of 20 meat products(6 hams, 3 bacons and 11 sausages) were examined for analyses of pH, Aw, TBARS, VBN, total aerobic microbial counts, and meat colors. The pH values of samples were between 5.33 and 6.59. The water activity (Aw) of samples ranged 0.90-0.93. TBARS and VBN values of samples were 0.11-0.59 and 2.37~14.75, respectively. The contaminated levels of total aerobic bacteria were less than 2.80 CFU/g. In meat color, L*, a*, and b* values of samples were in the range of 56-72, 5.2-34 and 0.7-16, respectively. It is suggested that the quality difference of meat products is attributed to the different additives and manufacturing processes. Therefore, we suggest that the results of this study are not only applied for evaluation of the microbiological and hygienic safety but also served as fundamental information for re-establishing the shelf-life of meat products.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.261-283
• /
• 2023

This study aimed to review the performance stability of PET (Polyethylene terephthalate) fiber reinforcing materials among the synthetic fiber types for which the application of performance reinforcing materials to fiber-reinforced concrete is being reviewed by examining short-term and long-term performance changes. To this end, the residual performance was analyzed after exposing the PET fiber to an acid/alkali environment, and the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture by age were analyzed, and the surface of the PET fiber collected from the concrete specimen was examined using a scanning microscope (SEM). The changes in were analyzed. As a result of the acid/alkali environment exposure test of PET fiber, the strength retention rate was 83.4~96.4% in acidic environment and 42.4~97.9% in alkaline environment. It was confirmed that the strength retention rate of the fiber itself significantly decreased when exposed to high-temperature strong alkali conditions, and the strength retention rate increased in the finished yarn coated with epoxy. In the test results of the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture, no reduction in flexural strength was found, and the equivalent flexural strength result also did not show any degradation in performance as a fiber reinforcement. Even in the SEM analysis results, no surface damage or cross-sectional change of the PET reinforcing fibers was observed. These results mean that no damage or cross-section reduction of PET reinforcing fibers occurs in cement concrete environments even when fiber-reinforced concrete is exposed to high temperatures in the early stage or depending on age, and the strength of PET fibers decreases in cement concrete environments. The impact is judged to be of no concern. As the flexural strength and equivalent flexural strength according to age were also stably expressed, it could be seen that performance degradation due to hydrolysis, which is a concern due to the use of PET fiber reinforcing materials, did not occur, and it was confirmed that stable residual strength retention characteristics were exhibited.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.475-481
• /
• 2019

The soybean cultivar 'Neulchan' was developed for production of soy-paste and tofu. SS91501-9-1-1 and SS96205 (F₂) were crossed in 1998, and F₃ to F₇ were selected by the pedigree method. A preliminary yield trial (PYT) and an advanced yield trial (AYT) were conducted from 2006 to 2008, and a regional yield trial (RYT) in nine regions was conducted from 2009 to 2011. In the RYT, 'Neulchan' was stable in variable environments and generated high yield. 'Neulchan' was determinate with white flower, light brown pod color, yellow spherical seed, and yellow hilum. Its flowering date and maturity date were Jul. 30 and Oct. 9, respectively. The plant height was shorter than that of 'Daewonkong' (a standard cultivar). 'Neulchan' had the same node number (14), higher first-pod height (12 cm), and lighter seed weight (21.7 g/100-seed weight) than those of 'Daewonkong' (14, 11, and 24.2 g/100-seed weight, respectively). 'Neulchan' had high resistance to bacterial pustule, and its resistance to soybean mosaic virus was similar to that of 'Daewonkong'. The yield and color of 'Neulchan' tofu were similar to those of 'Daewonkong' tofu, but the hardness was lower than that of 'Daewonkong' tofu. The soybean malt scent, fermented soybean yield, and γ-polyglutamic acid (γ-PGA) of 'Neulchan' were 3, 215%, and 24.6 mg/g, respectively. Its yield in adaptable regions was 307 kg/10a, higher than that of 'Daewonkong'. 'Neulchan' was expected to be cultivated and used widely for soy-paste and tofu production. (Registration No. 4904).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.57-72
• /
• 2018

In order to extract meaningful information from the excellent farming settlement cases of young farmers published by KNCAF, we studied the key words with text mining and created a word cloud for visualization. First, in the text mining results for the entire sample, the words 'CEO', 'corporate executive', 'think', 'self', 'start', 'mind', and 'effort' are the words with high frequency among the top 50 core words. Their ability to think, judge and push ahead with themselves is a result of showing that they have ability of to be managers or managers. And it is a expression of how they manages to achieve their dream without giving up their dream. The high frequency of words such as "father" and "parent" is due to the high ratio of parents' cooperation and succession. Also 'KNCAF', 'university', 'graduation' and 'study' are the results of their high educational awareness, and 'organic farming' and 'eco-friendly' are the result of the interest in eco-friendly agriculture. In addition, words related to the 6th industry such as 'sales' and 'experience' represent their efforts to revitalize farming and fishing villages. Meanwhile, 'internet', 'blog', 'online', 'SNS', 'ICT', 'composite' and 'smart' were not included in the top 50. However, the fact that these words were extracted without omission shows that young farmers are increasingly interested in the scientificization and high-tech of agriculture and fisheries Next, as a result of grouping the top 50 key words by crop, the words 'facilities' in livestock, vegetables and aquatic crops, the words 'equipment' and 'machine' in food crops were extracted as main words. 'Eco-friendly' and 'organic' appeared in vegetable crops and food crops, and 'organic' appeared in fruit crops. The 'worm' of eco-friendly farming method appeared in the food crops, and the 'certification', which means excellent agricultural and marine products, appeared only in the fishery crops. 'Production', which is related to '6th industry', appeared in all crops, 'processing' and 'distribution' appeared in the fruit crops, and 'experience' appeared in the vegetable crops, food crops and fruit crops. To visualize the extracted words by text mining, we created a word cloud with the entire samples and each crop sample. As a result, we were able to judge the meaning of excellent practices, which are unstructured text, by character size.