• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.472-477
• /
• 2017

Oil spills cause a lot of damage to the environment. Oil destroys the water environment and ecosystem in a very short period of time once they are contaminated by it, it takes a lot of time to recover from the contamination and the cleaning process is very difficult. Therefore, oil detectors are greatly needed as they can monitor any oil spills over the sea, rivers, and lakes. There are two kinds of technology available for detecting oil, viz. the contact and non-contact types. The former is based on the use of the conductivity, capacitance and microwaves, while the latter employs infrared, UV, laser, optic and radar technologies. As there are also various hurdles in the measuring of oil on water, such as the presence of waves, refraction of light, temperature and saltiness, it is imperative to select the right oil detector which is appropriate for the specific environment. In this study, a contact type oil detector is developed, which can be used in oil related industries, such as refineries, petrochemical companies, and power generation stations. The detector is made up of the sensor module, which floats on the water, and the controller which processes the signal coming from the sensor module and displays it. It is designed in such a way that the existence of oil is detected through the sensor and the change in the permittivity is observed to determine the volume and type of spilled oil.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2011

Saline corrosion is one of the major degradation mechanisms for stainless steel type 304 (SS304) dry storage cask during the spent fuel interim storage period. Slow strain rate test (SSRT) and neutral salt spray test (NSS) were performed at $85^{\circ}C$ and $200^{\circ}C$ with 0.5 wt% sodium chloride mist sprayed on the cold-rolled SS304 specimens of different degrees of reduction in this study. The weight changes of the NSS specimens tested at $85^{\circ}C$ for 2000 hours differed greatly from those at $200^{\circ}C$. The weight loss of NSS specimens was not significant at $85^{\circ}C$ but the weight gain decreased gradually with increasing the cold-rolled reduction. The yield strength (YS) and ultimate tensile stress (UTS) values obtained from the SSRT tests for lightly cold-rolled specimens in the salt spray environment at $85^{\circ}C$ and $200^{\circ}C$ are slightly lower than in air. But for those with 20% reductions, the specimen strengths were no longer changed by the saline corrosion. The preliminary results demonstrated that the quality and performance of cold-rolled SS304 is acceptable for fabrication of dry storage casks. However, more work on the corrosion behavior of cold-rolled stainless steel in the saline atmosphere is needed to better understand its long-term performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.192-200
• /
• 2015

Several algorithms have been developed to classify arrhythmia which rely on specific ECG(Electrocardiogram) database. Nevertheless personalized difference of ECG signal exist, performance degradation occurs because of carrying out diagnosis by general classification rule. Most methods require accurate detection of P-QRS-T point, higher computational cost and larger processing time. But it is difficult to detect the P and T wave signal because of person's individual difference. Therefore it is necessary to classify the pattern by analyzing personalized ECG signal and extracting minimal feature. Thus, QRS pattern Analysis of personalized ECG Signal by Q, R, S peak variability is presented in this paper. For this purpose, we detected R wave through the preprocessing method and extract eight feature by amplitude and phase variability. Also, we classified nine pattern in realtime through peak and morphology variability. PVC, PAC, Normal, LBBB, RBBB, Paced beat arrhythmia is evaluated by using 43 record of MIT-BIH arrhythmia database. The achieved scores indicate the average of 93.72% in QRS pattern detection classification.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1734-1738
• /
• 2007

The biological activities of strawberry were investigated during frozen storage. The concentrations of total phenolic content in strawberry juice and water extract were $2.342{\mu}g/ml\;and\;2.235{\mu}g/ml$, respectively. The total flavonoid content in strawberry juice and water extract were $200.36{\mu}g/ml\;and\;201.07 {\mu}g/ml$. respectively. Antioxidant activities of strawberry juice and water extract were determined. The DPPH of strawberry juice (94.2%) was higher than the water extract of strawberry (93.5%). ABTS of strawberry juice and water extract were 99.9% and 100.0%, respectively. Xanthine oxidase inhibitory activity and SOD-like activity of strawberry of water extracts were higher than those of strawberry juice. The changes in the antioxidant activity of strawberry was insignificant until 6 months of frozen storage. Therefore, it was expected that frozen storage of strawberry was useful preservation expedient for consistent supply of raw materials.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.49-54
• /
• 2002

Development of a rapid method possessing the requisite sensitivity and specificity for virus monitoring is necessary for protection of the shellfish-consuming public. Oysters tissue usually contains virus particles in relatively small concentrations along with various other substances that can interfere with detection steps. Therefore, the critical point concerning the detection of viruses in shellfish tissues resides in the processing of samples. The current study demonstrated the possibility of purifying small amounts of virus particles at the interface of a 10/50% sucrose gradient after a single round of sucrose gradient ultracentrifugation. We could detect HAV and poliovirus simultaneously from oyster tissues by using two different sets of primer. Furthermore, the method showed a high level of virus recovery rate (>95%) as determined by plaque assays of the final samples. Taken the advantages of the simple and sensitive methods, it was possible to detect 2 pfu of HAV in 5 g of oyster digestive tissues within 24h.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.660-664
• /
• 2014

This study aimed to investigate the effects of various soft steam treatments, namely, forced convection-boiler, forced convection-fan, and natural convection, on the pretreatment characteristics of potatoes. In this study, potatoes were exposed to various cooking conditions, including steaming method, treatment time (0-60 min), and temperature (60, 70, $80^{\circ}C$). Then, changes in temperature, cook value, ascorbic acid content, moisture content, and weight loss in the fresh and steam-treated samples were measured and evaluated. The results clearly showed that natural convective steaming was superior to other treatments in terms of heating characteristics, cook value (FC-b: $46.4{\pm}1.7$, FC-f: $21.8{\pm}1.1$, NC: $52.1{\pm}1.9min$ at $80^{\circ}C$), ascorbic acid content (FC-b: $36.5{\pm}2.7$, FC-f: $28.5{\pm}2.9$, NC: $48.2%{\pm}2.5%$ at $80^{\circ}C$), moisture retention (FCb: $74.6{\pm}0.8$, FC-f: $71.5{\pm}0.5$, NC: $77.6%{\pm}0.4%$ for 60 min at $80^{\circ}C$), and weight loss (FC-b: $13.9{\pm}0.8$, FC-f: $15.6{\pm}0.6$, NC: $10.6%{\pm}0.7%$ for 60 min at $80^{\circ}C$) for thermally processed potatoes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.139-147
• /
• 1991

The preservative effect of cellophane film packing on the quality of semi-salted and dried mackerel was studied. The product(P) of semi-salted and dried mackerel was prepared from raw mackerel by filleting, cleaning, soaking in 15%9v/w) salt solution for 30min, draining, packing with cellophane film (PT# 300, thickness:$20{\mu}{\textrm}{m}$) and drying for 4 hrs at $40^{\circ}C$ in hot air dryer. The product (C) was also prepared without cellophane film packing after draining. The product (C) and (P) were stored at $5.0{\pm}0.5^{\circ}C$. After processing and during storage, moisture content of product (P) was higher than that of product (C), but contents of VBN(volatile basic nitrogen), amino nitrogen and TMA of product (P) on dry basis were lower than those of product (C). Viable cell count, TBA value, peroxide value and decreasing rate of polyenoic acid of product (P) were also lower than those of product (C). In sensory evaluation, the shelf life of product (C) was about 9 days and that of product (P) was about 14 days. From the results of chemical and sensory evaluation, it was concluded that cellophane film packing was a good condition for preserving the quality of semi-salted and dried mackerel.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.213-220
• /
• 2018

In order to use Pitch pine (Pinus rigida Miller) as the material of the structural glued laminated timber, the effect of the amount of resin exudation due to storage time after the planning and the knot of the lamina were evaluated on the bonding properties of the glued board with resorcinol resin. For Pitch pine that was dried at high temperature ($120{\sim}95^{\circ}C$) and low temperature ($65{\sim}50^{\circ}C$), the flat sawn(tangential section) showed higher amount of resin exudation than the quarter sawn(radial section). And the low temperature drying wood showed higher resin exudation than the high temperature drying wood. The low and high temperature drying wood showed the highest amount of resin exudation on the 3rd day and 7th day, respectively and they were gradually decreased. However, there were no significant differences from 15 to 90 days. Adhesion performances were low until 2~3 days with high exudation of resin, but there were no significant differences after 15 days. Both high temperature and low temperature drying woods satisfied the Korean standard regardless of the storage time. The adhesive strengths of the laminating parts including knots were higher than those of KS criteria, but the wood failures were not satisfied the KS standard. Adhesive performances according to the laminating combinations (quarter sawn + quarter sawn, flat sawn + flat sawn, quarter sawn + flat sawn) were better than those of KS criteria in all laminating combinations in both high temperature and low temperature drying woods.

• Journal of Ginseng Research
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2002

In this study, cell cracker method as a non-collision method was evaluated for the possibility in manufacturing red ginseng powder. In color value of red ginseng powder, the L values indicating brightness were 68.18 for hammer mill (group A) and 72.08 for cell cracker (group B). The a values (redness) and b values (yellowness) were 4.21 26.56 for group A and 5.73, 28.36 for group B, respectively. As an extraction time increased, the absorbances at 420 nm of water extract of both groups were increased. In the loose bulk density, tapped bulk density and volume reduction radio indication the of powder in group A were less than those in group B. In both groups, the angles of side of red ginseng powder were shown less value than the angles of side of the powder. These two angles in group A were lets than those in group B. In sensory evaluation, the touchness between both groups was, not observed significant difference. In the contrary, the color and flavor, main factors affecting the overall quality of red ginseng powder product of group B were shown superior to those of group A. The overall preference of group B was shown higher than that of group A.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.262-272
• /
• 2003

Maleic anhydride-grafted-polypropylene(PP-g-MA) were used as a blend component and a compatibilizer, respectively, for two reactive blends of polyamide 66(PA 66)PP-g-MA binary blends and PA 66/polypropylene(PP)/PP-g-MA ternary blends. The goal of this work was to investigate the property differences between binary and ternary blends. Tensile strength, flexural modulus, heat deflection temperature, impact strength, melt flow index, and the dependence of melt viscosity on the shear rate were examined. The impact strengths of binary blends were higher than those of ternary blends at all compositions, since the in situ synthesis of PP-g-PA 66 copolymer through the imide formation between the amine end group of PA 66 and the anhydride group of PP-g-MA gave the increase of molecular weight and was more popular in binary blends than in ternary blends. In case of ternary blends, most of the properties were superior to those of binary blends, owing to the better properties of PP compared with PP-g-MA. The toughened binary blends with 70/30(PA 66/PP-g-MA) and 80/20 ratios were not commercially applicable due to their poor processibility. So, the ternary blends which showed lower melt viscosities were recommended for the commercial applications.