• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.183-186
• /
• 2007

The injection molding process has high accuracy and good reproducibility that are essential for mass production at low cost. Conventional molding processes typically use the water-based mold heating and air cooling methods. However, in the nano injection molding processes, this semi-active mold temperature control results in the several defects such as air-flow mark, non-fill, sticking and tearing, etc. Therefore, in order to control temperature of the molds actively and improve the quality of the molded products, the novel nano injection molding system, which uses active heating and cooling method, has been introduced. By using the Peltier devices, the temperature of locally adiabatic molds can be controlled dramatically and the quality of the molded patterns can be improved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.1
• /
• pp.19-26
• /
• 2006

The wear behavior as the hardness of the sliding elements on the dry wear has been investigated using a dual leaf-spring. The materials of the specimens are used as ten kinds along their hardness. In this study, both upper and lower specimens have been used the same materials. Using experimental data, we figured the relationship between wear coefficient and friction coefficient, and the relationship between wear coefficient and friction temperature. Also we combined friction temperature and friction coefficient instead of wear coefficient. We substituted this into wear equation of Archard. The result had been derived a newly wear equation in using dual leaf-spring wear system.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.18-27
• /
• 1997

Al 6061 alloy reinforced with 10 vol.% ${\delta}-Al_2O_3$ short fiber was fabricated by Rheo-compocasting and squwwze cating. Extrusion processings were performed at temperatures from 40$0^{\circ}C$ to 55$0^{\circ}C$ with various extrusion ratio for curved shape dies. In proportion to the increase of extrusion ratios and temperatures, ultimate tensile strength for extruded materials improved. SEM observation of fractured surfsce was capcble oof accounting for fracture mechanism and bounding state of fiber and matrix.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.255-258
• /
• 2002

폴리에스테르계 고분자를 용융온도 이상에서 가공하면 두 고분자간의 화학적인 상호교환반응이 일어나고, 이러한 상호에스테르 교환반응은 이들의 공중합체를 생성시켜 블렌드계의 상용성을 증대시킬 수 있으며, 구조와 물리적 성질을 상당한 수준까지 변화시킬 수 있기 때문에 용융가공시 중요한 인자가 되고 있다. 일반적으로 상호에스테르 교환반응에 의해 공중합체가 형성될 때 반응초기에는 블록 공중합체가 형성되며, 반응이 진행될수록 랜덤 공중합체가 형성 [1] 되며, 블렌딩 시간, 온도 그리고 조성비에 따라 상호교환방응 정도가 달라지게 된다[2-3]. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.106-106
• /
• 2011

아라미드 소재는 내열성, 난연성이 우수하고 일반 섬유보다 강한 물성을 지닌 수퍼섬유 소재의 하나로 보호복이나 군용, 특수의류 분야에 많은 용도전개가 가능하나 유리전이온도 및 결정화도가 상대적으로 높아서 난염성 섬유소재로 염색메카니즘의 명확한 규명이 없다. 따라서 본 연구에서는 아라미드 소재(m-Aramid, p-Aramid)의 염색방법에 대한 연구로, 캐치온 염료를 이용하여 팽윤제 종류 및 농도, 염색온도 조건, 중성염 효과 등 염색조건에 따른 염색특성을 알아보았다. 또한 분산염료 및 기타 염료 등의 적용을 통하여 다양한 염료적용 가능성에 대해 연구를 진행하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.79-86
• /
• 1994

스템핑용 냉연강판의 기계적 성질은 온도에 따라 변하므로 금형재의 열적 특성은 성형의 성공여부에 영향을 미칠 수 있으며 재질선정에 있어 중요한 인자의 하나이다. 금형재질이 성형에 미치는 영향을 조사하기 위하여 차체의 패널용으로 사용되는 강판에 대하여 상온 및 고온에서의 인장시험을 하였으며 구상흑연주철과 회주철을 중심으로 열특성을 조사하였다. 연신율과 인장 강도의 온도 의존성에 대한 검토와 함께 금형재료에 따른 열전달 특성을 분석하여 열특성 측면에서는 회주철이 구상흑연 주철보다 더 적합 하며 열전도율이나 비열 등의 열특성치도 금형재 선정에 중요한 인자중 하나라는 결론을 얻었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.62-68
• /
• 2003

In this study, an experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed rate of recycled resin were selected as processing parameters for studing the effect of those condition on the shrinkage and weight of molded parts. As a result, the shrinkage was increased with the higher mold and melt temperature and It was more senstive to the change of mold temperature. On the other hand, the weight of molded parts was decreased with the increment of mold and melt temperature.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.98-103
• /
• 2019

With the increasing need for environmental protection, it is particularly important to improve the energy saving and reliability of refrigerators. Generally, the cold air flowing into the freezer compartment transits to the bottom of the refrigerating compartment, which can lead to uneven temperature distribution. This paper proposes two design solutions for improving the temperature distribution problem. Of these, the optimal refrigeration design was selected and tested using Computational Fluid Dynamics (CFD) modeling and simulation. The results showed improved uniformity of the temperature distribution inside the refrigerator, thus benefitting food storage while reducing energy consumption.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.32-39
• /
• 1992

대형 강괴의 자유단조 공정 중에서 코깅(cogging)작업은 강괴 단조의 초기에 단면을 줄이면서 길이 방향으로 늘리는 작업이다. 코깅 작업의 역활은 주조시 발생하는 강괴 내부의 기공을 압착시켜 제거하며 주조 조직을 파괴하여 물성치를 균질화하고 향상시키는 것이다. 그러나 대형강괴의 작업에는 제약조건이 많이 있고 작업공정에서 공정변수도 여러가지 이다. 따라서 본 논문에서는 변형해석과 온도해석을 할 수 있는 3차원 열-점소성 유한요소해석 프로그램을 개발하고, 코깅공정에서 다이의 형상과 다이폭, 다이 겹침과 엇갈리기, 강괴의 온도 구배, 압하 깊이와 패스 설계등의 여러 공정 변수의 영향을 해석하여, 단조 효과를 최대화하는 최적의 단조 공정을 예측하여 공정개선에 적용하는 것이 목적이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.210-213
• /
• 2002

The Purpose of this study is to know temperature and thermal stress distribution in specimens during processing of WEDM. If it is constant to the cutting speed and the thickness of material, it is very important to the effect of temperature and the thermal stress distribution after cutting processing. This paper show the analysis result of the distribution of temperature and the residual stress along the direction of thickness before processing of WEDM and after when the cooling temperature is$20^{\circ}C$. The maximum temperature of edge of specimens is $1600^{\circ}C$. It has little temperature gradient in the depth which is 5mm away from edge of specimens. Equivalent residual stress is result in 180.7 MPa at maximum temperature.