• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.593-600
• /
• 2021

In this study, the vacuum distillation process for producing non-alcoholic red wine was optimized via response surface methodology. As a result of optimizing the responses (alcohol content, yield) for independent variables (operating time, boiling point, and temperature difference), 1% alcohol content and 81.15% yield were obtained at an operating time of 24.5 min, boiling point of 65℃, and temperature difference of 8℃. To investigate the physicochemical and sensory properties, non-alcoholic wines with different boiling points (bp 25℃, bp 45℃, and bp 65℃) and a blended wine (4.2% of control wine added) were prepared. As the boiling point increased, the alcohol content decreased, and CI (color intensity) and Hue increased. Blended wine exhibited the highest value and bp 65℃ showed the lowest value in terms of sensory properties. In conclusion, distillation at a low boiling point and blending control wine could be used to prepare non-alcoholic wine with a high preference.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.103-103
• /
• 2019

최근 식생활의 변화로 인한 동물성 포화지방, 고칼로리 식품의 섭취 증가와 운동 부족, 스트레스 등의 여러 요인으로 비만인구 비율이 증가 추세를 보이고 있다. 유자, 석류등 천연소재 추출액에는 플라보노이드 성분이 풍부하여 항암, 항산화, 항염증, 항미생물 활성 등 생리활성이 있는 것으로 보고된 바 있다. 발효유로 대표되는 유산균 제품은 장 건강, 항산화 등 다양한 장점을 지니고 있으나, 짧은 유통기간 및 냉장유통 등 보존성에 있어 취약점을 가지고 있다. 따라서 천연 추출물을 주원료로 Lactobacillus acidophilus로 발효한 천연소재발효물을 활용하여 항비만 효과에 관한 연구를 수행하였다. 유산균 발효유의 풍미 유지하면서 유통기간을 늘릴 수 있는 가공법을 개발하고 건강식품 소재 개발 및 산업화를 통하여 국민의 건강 증진을 도모하고자 본 연구를 수행하였다. 천연소재 프로바이오틱스 발효물을 제조하여 세포독성, NO생성 억제능, 항비만 활성, 관능검사를 수행한 결과는 다음과 같다. 천연소재 추출물 및 천연소재추출발효혼합물을 각각 10, 50, 100, $500{\mu}g/mL$의 농도로 처리한 시험구들의 세포생존율을 측정한 결과 가장 고농도인 $500{\mu}g/mL$의 농도에서 각각 96.2, 95.1, 97.3, 96.2, 98.1, 97.0 %로 확인되어, 높은 수준의 안전성이 확인되었다. 천연소재 추출물 및 천연소재추출발효혼합물의 항염증효과를 분석하고자 수행한 Nitrite 생성저해 효과를 분석한 결과, NO 생성율은 $500{\mu}g/mL$의 농도에서 각각 98.1, 98.2, 96.2, 97.3, 91.2, 95.3 %로 확인되어 시험구 D의 항염증 활성이 가장 높은 것으로 나타났다. 동일한 농도로 처리하였을 때 lipid accumulation은 각각 100.0, 99.1, 98.2, 98.5, 87.6, 91.8 %로 나타나 D시험구와 E시험구에서 지방세포 분화억제효과가 확인되었다. 관능검사 시행 결과, 농축비율에 따른 관능적 기호도는 5 brix > 3 brix > 1 brix > 10 brix 순으로 나타났다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.266-270
• /
• 1991

Storage in the form of brown or milled rice saves space and cut cost rather than storage of rough rice, the common way of grain storage in Korea. But, brown or milled rice may be more susceptable to grain aging and sensory change than rough rice. Rice stored in government warehouse for 20 months after harvest was hulled into brown or milled rice and packaged with kraft paper bag (paper package), polyprophylen (PP package), and polyethylene (PE package). Then, after those rice packages were stored under room condition for one year, we investigated germinability, fat acidity, and sensory change to determine milling and packaging effects. Germinability of rough and brown rice was decreased significantly after long-term storge. In germination rate, Chucheong cultivar was lower than Milyang #23, brown rice was lower than rough rice, but there was no differences within packaging materials. TTC test which had a significant correlation with germinability can be used as a handy procedure for predicting grain germination. Fat acidity was increased as the order of rough < milled < brown rice in terms of milling, and PP < paper < PE package in terms of packaging materials. Especially, storage of brown rice increased fat acidity above 30 mg KOH, indicating one of characteristics of grain aging. To prevent from high fat acidity it was necessary to store in forms of rough grain with paper or PP packaging and milled rice with paper, or PP, or PE packaging. In sensory test of stored grain, eating quality in brown rice was the worst because of acidification of fatty acid. Also, eating quality of stored grain became worse as fat acidity increased.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.675-688
• /
• 2022

Produced by steaming mature silkworms, HongJam is a natural functional food with various health-promoting effects. The current standard HongJam production protocol involves freezing and freeze-drying steamed mature silkworms for convenient long-term storage and/or selling it to customers. However, freeze-drying HongJam requires a range of processes and costs, which have contributed to its high resale value. In this study, we found that the cost of manufacturing HongJam powder could be reduced by homogenizing steamed mature silkworms using a high-speed blender and digital homogenizer, followed by spray drying. After the homogenized HongJam solution was digested by directly adding food-graded proteases, food-graded protease-digested homogenized HongJam solution was spray-dried. Food-graded digested protease or non-digested homogenized HongJam solutions could be used to produce food for special medical use for patients with general or specific diseases. This more efficient HongJam processing protocol proposed in this study can facilitate the development of sericulture farms and related industries by reducing the production costs of HongJam and its associated products.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.411-417
• /
• 2017

This study was conducted to establish the analysis method for the contents of choline in infant formulas and follow-up formulas by ion chromatograph (IC). To optimize the method, we compared several conditions for extraction, purification and instrumental measurement using spiked samples and certified reference material (CRM; NIST SRM 1849a) as test materials. IC method for choline was established using Ion Pac CG column and 18 mM $H_2SO_4$ mobile phase. The parameters of validation were specificity, linearity, LOD, LOQ, recovery, accuracy, precision and repeatability. The specificity was confirmed by the retention time and the linearity, $R_2$ was over 0.999 in range of 0.5~10 mg/L. The detection limit and quantification limit were 0.14, 0.43 mg/L. The accuracy and precision of this method using CRM were 95%, 2.1% respectively. Optimized methods were applied in sample analysis to verify the reliability. All the tested products were acceptable contents of choline compared with component specification for nutrition labeling. The standard operating procedures were prepared for choline to provide experimental information and to strengthen the management of nutrient in infant formula and follow-up formula.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.365-375
• /
• 2009

Statement of problems: Stress analysis on implant components of the combined screw- and cement-retained implant prosthesis has not investigated yet. Purpose: The purpose of this study was to assess the load distribution characteristics of implant prostheses with the different prosthodontic retention types, such as cement-type, screw-type and combined type by using 3-dimensional finite element analysis. Material and methods: A 3-dimensional finite element model was created in which two SS II implants (Osstem Co. Ltd.) were placed in the areas of the first premolar and the first molar in the mandible, and three-unit fixed partial dentures with four different retention types were fabricated on the two SS II implants. Model 1 was a cement-retained implant restoration made on two cement-retained type abutments (Comocta abutment; Osstem Co. Ltd.), and Model 2 was a screw-retained implant restoration made on the screw-retained type abutments (Octa abutment; Osstem Co. Ltd.). Model 3 was a combined type implant restoration made on the cement-retained type abutment (Comocta abutment) for the first molar and the screw-retained type abutment (Octa abutment) for the first premolar. Lastly, Model 4 was a combined type implant restoration made on the screw-retained type abutment (Octa abutment) for the first molar and the cement-retained type abutment (Comocta abutment) for the first premolar. Average masticatory force was applied on the central fossa in a vertical direction, and on the buccal cusp in a vertical and oblique direction for each model. Von-Mises stress patterns on alveolar bone, implant body, abutment, abutment screw, and prosthetic screw around implant prostheses were evaluated through 3-dimensional finite element analysis. Results: Model 2 showed the lowest von Mises stress. In all models, the von Mises stress distribution of cortical bone, cancellous bone and implant body showed the similar pattern. Regardless of loading conditions and type of abutment system, the stress of bone was concentrated on the cortical bone. The von-Mises stress on abutment, abutment screw, and prosthetic screw showed the lower values for the screw-retained type abutment than for the cement-retained type abutment regardless of the model type. There was little reciprocal effect of the abutment system between the molar and the premolar position. For all models, buccal cusp oblique loading caused the largest stress, followed by buccal cusp vertical loading and center vertical loading. Conclusion: Within the limitation of the FEA study, the combined type implant prosthesis did not demonstrate more stress around implant components than the cement type implant prosthesis. Under the assumption of ideal passive fit, the screw-type implant prosthesis showed the east stress around implant components.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.247-280
• /
• 2020

For customs-free and liberalization on the trade of aircraft parts, the WTO Agreement on Trade in Civil Aircraft was separately concluded as plurilateral trade agreement at the time of launching WTO in 1995, and currently 33 countries including the United States and the EU are acceded but Korea does not. Major details of the Agreement on Trade in Civil Aircraft include product coverage, the elimination of customs duties and other charges, the prohibition of government-directed procurement of civil aircraft, the application of the Agreement on Subsides and Countervailing Measures, and the consultation on issues related to this Agreement and dispute resolution. Article 89 paragraph 6 of the current Customs Act was newly established on December 31, 2018, and the tariff reduction rate for imports of aircraft parts will be reduced in stages from May 2019 and the tariff reduction system will be abolished in 2026. Accordingly, looking at the impact of the Agreement on Trade in Civil Aircraft on the aviation industry, first, as for the impact on the air transport industry, an tariff allotment of the domestic air transport industry is expected to reach about 160 billion won a year from 2026, and upon acceding to the Agreement on Trade in Civil Aircraft, the domestic air transport industry will be able to import aircraft parts at no tariff, so it will not have to pay 3 to 8 percent import duties. Second, as for the impact on the aviation MRO industry, if the tariff reduction system for aircraft parts is phased out or abolished in stages, overseas outsourcing costs in the engine maintenance and parts maintenance are expected to increase, and upon acceding to the Agreement on Trade in Civil Aircraft, the aviation MRO industry will be able to import aircraft parts at no tariff, so it will reduce overseas outsourcing costs. If the author proposes a policy direction for the trade liberalization of aircraft parts to ensure competitiveness of the aviation industry, first, as for the tariff reduction by the use of FTA, in order to be favored with the tariff reduction by the use of FTA, it is necessary to secure the certificate of origin from foreign traders in the United States and the EU, and to revise the provisions of Korea-Singapore and Korea-EU FTA. Second, as for the push of acceding to the Agreement on Trade in Civil Aircraft, it would be resonable to push the acceding to Agreement on Trade in Civil Aircraft for customs-free on the trade of aircraft parts, as the tariff reduction method by the use of FTA has limits. Third, as for the improvement of the tariff reduction system for aircraft parts under the Customs Act, it is expected that there will take a considerable amount of time until the acceding to the Agreement on Trade in Civil Aircraft, so separate improvement measures are needed to continue the tariff reduction system of aircraft parts under Article 89 paragraph 6 of the Customs Act. In conclusion, Korea should accede to the WTO Agreement on Trade in Civil Aircraft to create an environment in which our aviation industry can compete fairly with foreign aviation industries and ensure competitiveness by achieving customs-free and liberalization on the trade of aircraft parts.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.81-91
• /
• 2006

The corrugated web is a plate that was manufactured with a corrugated shape. It is widely used in bridges, buildings, and culverts. A girder with a corrugated web can be crippled by local, in-plane compressive loads. Due to its high out-of-plane strength, however, a stiffener is usually not needed in trapezoidally corrugated plates, and the corrugated profile of the web can change the boundary condition of the edge load. Some researchers have studied the strength of the partial-edge loading of the trapezoidally corrugated web, but they have not considered the profile of corrugation in their studies. This paper investigates the influence of the corrugate profile. A parametric study was conducted on the shape parameter using the finite-element method. In this parametric study, the relationship between the corrugated shape and the partial-edge strength was also investigated by dividing the partial-edge strength into the web capacity and the flange capacity.

• Journal of the Korean Magnetics Society
• /
• v.15 no.5
• /
• pp.292-297
• /
• 2005

Steam generator of a nuclear power plant has important rolls for the heat transfer and the isolation of radioactive materials. So bursting of the steam generator tube is directly related to the accident of nuclear power plants. Incone1600 has been used for the steam generator tube material. The material shows non-magnetic and metallic properties, eddy current NDT method has been employed for defects detection. In this work, a differential type of eddy current probe was developed to improve resolution of defect detection. To verify properties of the developed differential type eddy current probe, we have made reference material with SUS304 which has similar magnetic and electrical properties of Inconel600. Using the developed differential type eddy current probe, we can detect defect size of 0.25 mm in diameter and 0.2 mm in depth (volume of $1{\times}10^{-3}\;mm^3$) with the reference material.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1028-1034
• /
• 2001

The 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting. The microstructures and tensile test for the cold rolled composites with maximum 50% reduction ratio were investigated. In the case of TiNi fiber with 2mm interval in preform, the interface bonding of fabricated composites were good, interface diffusion layer of this composites was made by the mutual diffusion. Transverse section of TiNi fiber was decreased with increasing reduction ratio and longitudinal section of TiNi fiber showed multiple wave phenomenon. And the tensile strength of composites at 38% reduction ratio was the most high. In the case of over 38% reduction ratio, the decrease of the tensile strength was due to TiNi fiber rupture by excess working. The fracture mode was appeared brittle fracture with increasing reduction ratio.